1. Introducció
Thank you for choosing the Aurora S1 10-Inch Single Row LED Off-Road Light Bar. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new light bar. Please read these instructions thoroughly before installation and retain them for future reference.
Davant view of the Aurora S1 10-Inch Single Row LED Off-Road Light Bar, showcasing its compact design and LED array.
2. Informació de seguretat
Observeu sempre les següents precaucions de seguretat per evitar lesions o danys al producte i al vehicle:
- Desconnecteu la bateria del vehicle abans de començar qualsevol instal·lació elèctrica.
- Assegureu-vos que totes les connexions del cablejat estiguin ben fixades i degudament aïllades per evitar curtcircuits.
- Utilitzeu l'equip de protecció individual adequat, inclosa la protecció ocular, durant la instal·lació.
- Munteu la barra de llums de manera segura per evitar que es converteixi en un projectil durant el funcionament del vehicle.
- No mireu directament a la barra de llums quan estigui il·luminada, ja que podeu causar fatiga o danys visuals.
- Consulteu un professional si teniu dubtes sobre alguna part del procés d'instal·lació.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de continuar amb la instal·lació:
- Aurora S1 10-Inch Single Row LED Off-Road Light Bar
- Deluxe Wiring Harness (includes on/off switch with LED indicator, in-line fuse, 12V 40A relay)
- Mounting Brackets and Hardware (security nuts, bolts, Allen wrench)
4. Especificacions
| Característica | Detall |
|---|---|
| Model | ALO-S1-10-P7E7J |
| Dimensions (L x A x A) | 11.9 x 3.2 x 1.8 polzades (301.6 x 82.3 x 44.6 mm) |
| Wattage | 50W |
| Amperage Sorteig | 2.3A |
| Llums | 4,280 (rated) |
| Patró del feix | Combinació |
| Classificació IP | IP69K |
| Material | 6063 Aluminum Housing, GE Lexan Lens, 316 Stainless Steel Screws |
| Tipus de connector | Alemany |
| Pes | 1.06 lliures (481.94 grams) |
A technical diagram providing detailed measurements (A, B, C, D, E, F, G) for different lengths of the Aurora S1 light bar, including the 10-inch model, and the number of LEDs per size.
5. Instal·lació
5.1 Muntatge de la barra de llums
- Identify a suitable mounting location on your vehicle that provides clear light projection and secure attachment.
- Attach the provided mounting brackets to the light bar using the supplied hardware. Ensure the security nuts are tightened appropriately with the Allen wrench.
- Position the light bar in the desired location and mark the drilling points for the brackets.
- Drill pilot holes and securely fasten the light bar to the vehicle using appropriate hardware (not included, if different from supplied).
Close-up of the stainless steel mounting bracket, designed for secure attachment, featuring security nuts and accompanied by an Allen wrench for installation.
5.2 Instruccions de cablejat
The Aurora S1 light bar includes a deluxe wiring harness for simplified installation. It is recommended to have this step performed by a qualified automotive electrician if you are unfamiliar with vehicle electrical systems.
- Desconnecta la bateria: Abans d'arrencar, desconnecteu el terminal negatiu de la bateria del vehicle per evitar curtcircuits.
- Connecta la barra de llums: Connect the Deutsch connector from the light bar to the corresponding connector on the wiring harness. Ensure a firm, waterproof connection.
- Connectar l'alimentació: Connect the positive (+) wire from the wiring harness to the positive terminal of your vehicle's battery.
- Connectar a terra: Connect the negative (-) wire from the wiring harness to a suitable ground point on the vehicle chassis.
- Interruptor de muntatge: Install the on/off switch in a convenient and accessible location within the vehicle's cabin.
- Cablejat segur: Route and secure all wiring away from moving parts, hot surfaces, and sharp edges using zip ties or cable clamps.
- Torneu a connectar la bateria: Once all connections are secure and verified, reconnect the vehicle's battery.
This image illustrates key features: a robust heat sink for efficient thermal management, a GORE breather for condensation prevention, a waterproof fuse housing, a secure Deutsch connector, and a well-locked mounting bracket with security nuts.
6. Instruccions de funcionament
To operate the Aurora S1 LED Light Bar:
- Ensure the vehicle's battery is connected and the light bar is properly installed.
- Press the on/off switch located in your vehicle's cabin to illuminate the light bar. The LED indicator on the switch will light up when the bar is active.
- Press the switch again to turn off the light bar.
7. Manteniment
Regular maintenance ensures optimal performance and longevity of your Aurora S1 LED Light Bar:
- Neteja: Clean the lens and housing periodically with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the Lexan lens or Dupont paint finish.
- Comprovació de la connexió: Periodically inspect all electrical connections, especially the Deutsch connector, for tightness and corrosion.
- Seguretat de muntatge: Verify that the mounting brackets and hardware remain secure, especially after off-road use or exposure to vibrations.
- Característiques de durabilitat: The light bar features an IP69K rating for dust and water ingress, a GE Lexan lens resistant to scratches and UV, a patented breather apparatus to prevent condensation, and a Dupont painted housing for long-term durability.
This image highlights the robust exterior construction, detailing the IP69K rating for extreme durability, 6063 aluminum housing, GE Lexan lens, patented breather, Deutsch connector, 316 stainless steel fasteners, and Dupont painting for long-lasting finish.
This image describes the internal components, emphasizing the use of USA-made Cree LED chips, a Printed Circuit Board Assembly (PCBA) with advanced protection features for temperature, voltage, and current, and integrated over-voltagprotecció.
8. Solució De Problemes
If you encounter issues with your light bar, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La barra de llums no s'encén. | No power, blown fuse, loose connection, faulty switch. | Check battery connections. Inspect the in-line fuse in the wiring harness and replace if blown. Ensure all Deutsch and power/ground connections are secure. Test the switch functionality. |
| Light bar is dim or flickers. | Insufficient power, loose connection, damaged wiring. | Verificar el volum adequattage from the power source. Check all wiring for damage or loose connections. Ensure proper grounding. |
| Condensació a l'interior de la lent. | Extreme temperature changes, breather apparatus obstruction. | The patented breather apparatus is designed to prevent this. If persistent, ensure the breather is not obstructed. Minor condensation often dissipates with use. |
9. Garantia i Suport
The housing of your Aurora S1 LED Light Bar is coated with Outdoor Dupont painting, guaranteeing its finish will remain unchanged for 5 years under normal conditions. For specific warranty details on other components and for technical support, please refer to the official Aurora product weblloc web o contacteu directament amb el seu servei d'atenció al client.
This image outlines the rigorous testing and certifications, including Salt & Fog testing, Lens Impact testing, Vibration testing, UV testing, CE certification, and RoHS compliance, ensuring product reliability and safety.
