InnoGear 24 LED Solar Gutter Lights Instruction Manual

Introducció

Thank you for choosing InnoGear 24 LED Solar Gutter Lights. This manual provides essential information for the proper installation, operation, and maintenance of your solar lights. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

Precaucions de seguretat

• Ensure the solar panel receives direct sunlight for at least 6-8 hours daily for optimal charging.
• No desmunteu ni modifiqueu el producte. Les modificacions no autoritzades poden anul·lar la garantia i plantejar riscos per a la seguretat.
• Mantingueu el producte allunyat del foc o de temperatures elevades.
• Avoid placing the light in areas prone to heavy shade, as this will reduce charging efficiency.
• Handle with care during installation to prevent damage to the solar panel or LED array.

Contingut del paquet

Cada paquet conté els articles següents:

• InnoGear 24 LED Solar Sconce Lights (Quantity: 4)
• Accessoris de muntatge (cargols, tacs de paret)
• Manual d'usuari

Producte acabatview

Familiarize yourself with the components of your InnoGear solar light:

Imatge: Frontal view of the solar light highlighting the 24 LEDs, motion sensor, and the accessible on/off switch. The back shows keyhole slots for easy mounting.

1. Panell solar: Located on the top surface, converts sunlight into electricity.
2. 24 Llums LED: Provide ultra-bright illumination.
3. Sensor de moviment PIR: Detects movement to activate bright light mode.
4. Interruptor d'encesa/apagada: Controls the power to the unit.
5. Mounting Keyholes: Slots on the back for secure wall mounting.

Guia d'instal·lació

Seguiu aquests passos per a una instal·lació correcta:

1. Càrrec inicial: Before first use, place the solar lights in direct sunlight for 1-2 days to allow the internal battery to fully charge. Ensure the On/Off switch is in the 'On' position during this initial charge.
2. Seleccioneu la ubicació: Trieu una ubicació que rebi ample direct sunlight throughout the day. Avoid areas under eaves, trees, or other obstructions that may block sunlight. The light should be mounted at a height that allows the motion sensor to effectively detect movement (typically 6-10 feet from the ground).
3. Marca els punts de perforació: Hold the light against the desired mounting surface and mark the positions for the two keyhole slots. Ensure the marks are level and accurately spaced.
4. Forats: Drill two holes at the marked positions. Insert the provided wall plugs into the drilled holes if mounting on masonry or drywall.
5. Instal·leu els cargols: Insert the screws into the wall plugs (or directly into wood) leaving a small gap (approximately 0.1-0.2 inches) between the screw head and the mounting surface. This gap is necessary for the keyhole slots to slide onto the screws.
6. Muntar la llum: Align the keyhole slots on the back of the solar light with the installed screws. Slide the light downwards to secure it in place. Ensure the light is firmly attached to the wall.

Imatge: Example of InnoGear solar lights mounted on a house exterior, providing illumination.

Instruccions de funcionament

Your InnoGear solar light operates automatically once activated:

1. Encès/apagat: Locate the On/Off switch on the front of the light. Press the switch once to turn the light 'On'. The LED array will blink 3 times to confirm it is on. Press the switch again to turn the light 'Off'; the LED array will blink 2 times. Ensure the light is 'On' for automatic operation.
2. Funcionament automàtic: During the day, the solar panel charges the internal battery. At dusk, the light will automatically enter a dim light mode.
3. Activació del sensor de moviment: When motion is detected within a range of 10-20 feet and a 90-degree angle, the light will automatically switch to a bright illumination mode.
4. Return to Dim Mode: After approximately 10-15 seconds of no detected motion, the light will revert to its dim light mode to conserve power.

Image: Visual representation of the motion sensor's operation, showing detection range and light intensity changes.

Manteniment

To ensure optimal performance and extend the lifespan of your solar lights, follow these maintenance tips:

• Panell solar net: Netegeu regularment el panell solar amb un drap suau iamp drap per eliminar la pols, la brutícia, les fulles o la neu. Un panell net garanteix la màxima absorció de la llum solar i l'eficiència de càrrega.
• Inspeccionar per danys: Periodically check the light for any physical damage, loose screws, or signs of wear.
• Cura de la bateria: The integrated Lithium-Ion battery is designed for long-term use. If the light's performance significantly decreases over time, ensure the solar panel is clean and receiving adequate sunlight.

Image: The solar light demonstrating its IP65 waterproof capability, ensuring durability in outdoor environments.

Resolució de problemes

If your solar light is not functioning as expected, consider the following:

Especificacions tècniques

Detailed specifications for the InnoGear 24 LED Solar Gutter Light:

• Marca: InnoGear
• Número de model: IG-20LED300LM
• Font de llum: 24 LED
• Brillantor: 150 lúmens
• Temperatura de color: 6500K (llum blanca)
• Font d'alimentació: Energia solar
• Bateria: 1 bateria de ions de liti (inclosa)
• Material: Acrilonitril butadiè estirè (ABS)
• Nivell de resistència a l'aigua: Impermeable IP65
• Sensor de moviment: PIR (infrarojos passius)
• Interval de detecció: 10-20 feet, 90-degree angle
• Dimensions del producte: 5.35 cm de llargada x 3.54 cm d'amplada x 1.18 cm d'alçada
• Tipus d'instal·lació: Muntatge de paret
• Wattage: 1.5 watts
• Voltage: 5.5 Volts

Garantia i Suport

For warranty information or technical support, please refer to the product packaging or contact InnoGear customer service directly. Contact details are typically available on the official InnoGear weblloc web o a través de la vostra plataforma de compra.