Stanley Fatmax X3R Red Beam Multi-Line Laser Level

1. Producte acabatview

The Stanley Fatmax X3R Red Beam Multi-Line Laser Level (FMHT1-77357) is a professional-grade tool designed for precise leveling and alignment tasks in various construction and renovation projects. It projects three 360-degree red laser lines, offering comprehensive coverage for indoor and outdoor applications.

Les característiques clau inclouen:

• 20M Working range, up to 50M with a detector.
• Accuracy of +/- 3mm @10M.
• Projects 3 x 360° lines for full room coverage.
• Equipped with 1/4" and 5/8" thread for tripod mounting.
• Rated to IP54 for protection against dust and water splashes.
• Features a tough and rugged rubber over-molded housing for durability.
• Alimentat per una bateria recarregable d'ions de liti.
• Includes a pulse mode for use with a detector.
• Pendulum lock for safe transportation.

Figure 1: Stanley Fatmax X3R Laser Level with all included accessories.

2. Informació de seguretat

Always read and understand all safety warnings and instructions before operating this product. Failure to follow the warnings and instructions may result in serious injury.

2.1 Seguretat làser

• PRECAUCIÓ: Laser Radiation. Do not stare into beam. Class 2 Laser Product.
• No dirigiu intencionadament el raig làser a persones o animals.
• Eviteu l'exposició directa dels ulls al raig làser.
• No desmunteu el nivell làser. No hi ha peces a l'interior que l'usuari pugui reparar.
• Use the provided red beam laser enhancement glasses to improve visibility of the laser line, but note they do not protect against direct exposure to the laser beam.

2.2 Seguretat de la bateria

• Use only the charger supplied with the device.
• No exposeu les bateries a temperatures extremes ni a la llum solar directa.
• No curtcircuiteu els terminals de la bateria.
• Desfeu-vos de les piles de manera responsable d'acord amb la normativa local.

3. Contingut del paquet

Desembaleu la caixa amb cura i assegureu-vos que tots els elements hi siguin presents i no estiguin danyats:

• Stanley Fatmax X3R Multi-Line Laser Level (FMHT1-77357)
• Bateria recarregable de ions de liti (preinstal·lada o separada)
• Carregador de bateria
• Red Target Plate
• Red Beam Laser Enhancement Glasses
• Maleta de transport
• Manual d'instruccions (aquest document)

4. Configuració

4.1 Càrrega de la bateria

Before first use, fully charge the lithium-ion battery. Connect the charger to the charging port on the laser level and plug it into a power outlet. The charging indicator light will show the charging status.

Figure 2: Charging port location on the laser level.

4.2 Positioning the Laser Level

The laser level can be placed on a stable, flat surface or mounted on a tripod using the 1/4" or 5/8" thread at its base. Ensure the surface is level for optimal performance, although the unit features self-leveling capabilities.

Figure 3: Adjusting the laser level on a tripod for precise positioning.

5. Instruccions de funcionament

5.1 Powering On/Off and Self-Leveling

To power on the device, slide the pendulum lock switch to the unlocked position. The laser level will automatically self-level. If the unit is outside its self-leveling range, the laser lines will flash to indicate an unlevel condition. Adjust the unit's position until the lines become steady.

Figure 4: Control panel of the laser level, showing buttons and indicators.

5.2 Selecció dels modes làser

The Stanley Fatmax X3R projects three 360-degree laser lines. Use the mode selection buttons on the control panel to cycle through different line combinations (e.g., horizontal only, vertical only, or all lines simultaneously).

Figure 5: Laser level projecting lines during construction work.

Figure 6: Laser lines projected on a wall, demonstrating multi-line capability.

Figure 7: Laser lines assisting with floor tile installation.

5.3 Pulse Mode for Detector Use

For outdoor use or in bright conditions, activate the pulse mode. This mode allows the laser level to be used with a compatible laser detector (sold separately) to extend the working range up to 50 meters. Refer to your detector's manual for specific instructions on pairing and use.

5.4 Using the Pendulum Lock

When transporting or storing the laser level, always engage the pendulum lock. This protects the internal pendulum mechanism from damage due to vibrations or impacts.

Figure 8: Durable rubber over-molded housing for enhanced protection.

6. Manteniment

6.1 Neteja

Wipe the laser level with a soft, damp cloth. Do not use abrasive cleaners or solvents. Keep the laser apertures clean and free of dust or debris to ensure optimal beam clarity.

6.2 Emmagatzematge

Store the laser level in its carry case in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure the pendulum lock is engaged before storage.

6.3 Cura de la bateria

For long-term storage, it is recommended to charge the battery to approximately 50% capacity every few months to maintain battery health.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

For warranty information, technical support, or service inquiries, please contact Stanley Customer Service. Keep your proof of purchase for any warranty claims.

You can find more information and contact details on the official Stanley weblloc: www.stanleytools.com