1. Introducció
This manual provides detailed instructions for the safe and efficient use of the Tecnolite LED-12V-360W-PR 360W Power Supply Driver. This device is designed for project applications, converting AC input voltage to a stable 12V DC output for LED lighting systems and other compatible devices. Please read this manual thoroughly before installation and operation.
Figura 1: Tecnolite LED-12V-360W-PR 360W Power Supply Driver. This image shows the aluminum casing, ventilation slots, input/output terminals, and voltage interruptor de selecció.
2. Informació de seguretat
Observeu sempre les següents precaucions de seguretat per evitar lesions o danys al dispositiu:
- ATENCIÓ! ALTA VOLTAGE DINS. Do not remove this cover. Only qualified service personnel should perform maintenance or repairs.
- Assegureu-vos que l'entrada voltage switch (115V/230V) is correctly set before connecting to the power source to avoid damaging the unit.
- Desconnecteu l'alimentació abans de fer qualsevol connexió o ajust.
- Install the driver in a well-ventilated area to prevent overheating.
- No exposeu la unitat a la humitat ni a temperatures extremes.
- Ensure proper grounding (indicated by the # symbol on the terminal block).
- No supereu la capacitat de càrrega màxima de 360 W.
3. Característiques del producte
- Designed for project applications.
- Vol d’entrada amplatage range: 100-277 VAC.
- Volum de sortida establetage: 12 VDC.
- High power output: 360 W maximum load.
- C d'alumini resistentasing for heat dissipation and protection.
- Integrated drivers for efficient power conversion.
4. Configuració i instal·lació
- Desembalatge: Traieu amb cura la font d'alimentació del seu embalatge i inspeccioneu-la per si hi ha algun dany físic.
- Muntatge: Mount the driver securely in a location that allows for adequate ventilation. Ensure no obstructions block the ventilation slots.
- Entrada Voltage Selecció: Localitza el voltage selection switch on the side of the unit. Set it to either 115V or 230V according to your local mains voltage. Incorrect selection can damage the unit.
- Entrada de cablejat (CA): Connect the AC input wires to the terminal block labeled 'L' (Live), 'N' (Neutral), and '#' (Ground). Ensure all connections are tight and secure.
- Sortida de cablejat (CC): Connect your 12V DC load (e.g., LED strips, modules) to the output terminals labeled '+V' and '-V'. Observe correct polarity (+ to + and - to -).
- Comprovació final: Double-check all connections and the input voltage selection before applying power.
5. Instruccions de funcionament
Once the power supply is correctly installed and wired, you can apply power. The unit will convert the AC input to a stable 12V DC output. The output voltage can be finely adjusted using the '+V ADJ' potentiometer if necessary, though it is typically pre-calibrated.
- Ensure the total power consumption of connected devices does not exceed 360W.
- Monitor the unit for any unusual noises or excessive heat during initial operation.
6. Manteniment
The Tecnolite LED-12V-360W-PR driver requires minimal maintenance. Follow these guidelines to ensure longevity:
- Mantingueu la unitat neta i lliure de pols i deixalles. Feu servir un drap suau i sec per netejar-la.
- Periodically check ventilation openings to ensure they are not blocked.
- Inspect wiring connections for tightness and signs of wear or corrosion.
- No intenteu obrir la casing, as it contains high voltage components and should only be serviced by qualified personnel.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense sortida voltage. | No input power; incorrect voltage selection; faulty wiring; overload. | Check power source; verify 115V/230V switch setting; inspect all wiring connections; reduce load. |
| Volum de sortidatage és inestable o incorrecte. | Overload; faulty load; internal issue. | Reduce load; test with a different load; if problem persists, contact support. |
| La unitat s'està sobreescalfant. | Mala ventilació; càrrega excessiva. | Ensure adequate airflow around the unit; reduce load to within specifications. |
8. Especificacions
| Fabricant | Tecnolita |
| Número de model | Driver-LED-12V-360W-PR |
| Número de part | Driver-LED-12V-360W-PR |
| Font d'alimentació | Elèctric amb cable |
| Entrada Voltage | 100-277 VAC |
| Vol. De sortidatage | 12 VDC |
| Maximum Power / Load | 360 W |
| Quantitat de paquet d'articles | 1 |
| Piles necessàries | No |
| Dimensions del producte (L x A x A) | 22 x 11.5 x 5.5 cm |
| Pes de l'article | 860 g |
| ASIN | B017ST41FA |
9. Garantia i Suport
For warranty information or technical support, please contact Tecnolite customer service or visit the official Tecnolite brand store.
Tecnolite Brand Store: Tecnolite on Amazon.com.mx
