SEM 61983 Custom Fill Color Coat Blank Aerosol Instruction Manual

1. Introducció

This manual provides essential instructions for the safe and effective use of the SEM 61983 Custom Fill Color Coat Blank Aerosol. This product is designed to be filled with SEM Color Coat using a Custom Fill machine, enabling the application of custom colors for refinishing vinyl, plastic, carpet, and velour surfaces.

SEM 61983 Custom Fill Color Coat Blank Aerosol Can

Image 1.1: SEM 61983 Custom Fill Color Coat Blank Aerosol. This image displays the product, a silver aerosol can with a clear cap, labeled "SEM Custom Fill for Color Coat" and model number "61983".

2. Informació de seguretat

DANGER: EXTREMELY FLAMMABLE AEROSOL. PRESSURIZED CONTAINER. MAY BURST IF HEATED. CAUSES SERIOUS EYE IRRITATION. READ CAUTIONS ON BACK PANEL.

Mantenir allunyat de la calor, superfícies calentes, espurnes, flames obertes i altres fonts d'ignició. No fumar.
No ruixeu sobre una flama oberta o una altra font d'ignició.
No perforar ni cremar, fins i tot després del seu ús.
Protegiu de la llum solar. No exposar a temperatures superiors a 50 °C (122 °F).
Utilitzeu només a l'aire lliure o en una zona ben ventilada.
Utilitzeu protecció ocular i guants de protecció.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
Mantenir fora de l'abast dels nens.

3. Producte acabatview

The SEM 61983 Custom Fill Color Coat Blank Aerosol is designed for professional use in automotive refinishing. Its key features include:

Custom Fill Compatibility: Specifically designed to be filled with SEM Color Coat using a Custom Fill machine.
No Clean Up: Facilitates efficient workflow.
Comfort Tip: Engineered to reduce finger fatigue during extended use.
Pressió consistent: Maintains pressure throughout the can for uniform application.
Professional Spray Pattern: Delivers a fine, even spray for optimal results.
Aplicació versàtil: Suitable for vinyl, plastic, carpet, and velour surfaces.

4. Setup and Filling

This blank aerosol requires filling with SEM Color Coat using a specialized Custom Fill machine. Follow the instructions provided with your Custom Fill machine for proper filling procedures.

Ensure the Custom Fill machine is clean and in good working order.
Select the desired SEM Color Coat product.
Place the SEM 61983 blank aerosol into the Custom Fill machine according to the machine's operating instructions.
Fill the aerosol with the specified amount of Color Coat.
After filling, ensure the can is properly sealed and labeled with the color and date filled for future reference.

5. Instruccions de funcionament

Once filled, the SEM 61983 aerosol functions as a standard spray can. Always perform a test spray on an inconspicuous area before full application.

Preparació de la superfície: Ensure the surface to be coated is clean, dry, and free of grease, oil, and loose debris. For best adhesion, follow SEM's recommended surface preparation guidelines for the specific substrate (vinyl, plastic, carpet, or velour).
Agitar la llauna: Shake the filled aerosol can vigorously for at least one minute after the mixing ball begins to rattle. Continue shaking periodically during application.
Aplicació: Hold the can approximately 8-10 inches (20-25 cm) from the surface. Apply the Color Coat in light, even coats using a steady, sweeping motion. Avoid heavy coats to prevent runs and drips.
Temps d'assecat: Allow appropriate flash-off time between coats as recommended by the specific SEM Color Coat product used. Refer to the Color Coat product data sheet for specific drying and recoat times.
Capes múltiples: Apply additional coats as needed to achieve desired coverage and color depth.
Curat: Allow the product to fully cure before subjecting the treated surface to wear or moisture.

6. Manteniment i emmagatzematge

Broquet de neteja: After each use, invert the can and spray for a few seconds until only clear propellant comes out. This prevents the nozzle from clogging.
Emmagatzematge: Store the aerosol can in a cool, dry, well-ventilated area, away from direct sunlight and temperatures exceeding 50°C (122°F).
Eliminació: Dispose of empty cans according to local regulations for hazardous waste. Do not puncture or incinerate.

7. Solució De Problemes

Problema	Causa possible	Solució
Broquet obstruït	Paint dried in the nozzle.	Remove nozzle and clean with a solvent or replace with a new nozzle. Prevent by inverting and spraying after use.
Patró de polvorització desigual	Insufficient shaking; nozzle partially clogged; incorrect spray distance.	Shake can thoroughly. Clean or replace nozzle. Maintain consistent 8-10 inch spray distance.
Runs or Drips	Applying too much material in one coat; holding can too close.	Apply lighter, more even coats. Increase spray distance.
Mala adherència	Improper surface preparation (grease, dirt, moisture).	Ensure surface is thoroughly cleaned, degreased, and dry before application. Follow SEM's specific surface prep guidelines.

8. Especificacions

Marca: SEM
Nom del model: 61983
Formulari de l'article: Aerosol
Volum de l'article: 16 unces líquides
Pes net: 3.9 oz. / 110 g (as per can label)
Tipus d'acabat: Gloss (when filled with appropriate Color Coat)
Usos específics: Carpet, Floor (for Color Coat application)
Recomanació de superfície: Plàstic, Vinil
Cobertura: 13.5 square feet/gallon (for Color Coat application)
Dimensions del producte: 12 x 9 x 9 polzades (dimensions de l'embalatge)
Número de peça del fabricant: 61983
UPC: 646786619830

9. Garantia i Suport

Information regarding specific product warranty and customer support for the SEM 61983 Custom Fill Color Coat Blank Aerosol is not provided in the available product data. Please refer to the official SEM website or contact SEM customer service directly for details on warranty coverage and technical assistance.

Per a més informació, podeu visitar el SEM Products official weblloc.

	SEM Plastic Repair and Refinishing Procedures: A Comprehensive Guide This guide from SEM provides detailed procedures for repairing and refinishing automotive plastic parts, including fenders, bumpers, dashboards, and trim. It covers identifying plastic types (flexible, rigid, extra-rigid) and outlines step-by-step instructions using SEM's range of repair materials, primers, and coatings. Includes product lists and standard operating procedures.
	SEM Chip Guards: Automotive Paint Protection and Texture Coating Guide A comprehensive guide to SEM Chip Guards, detailing their benefits for protecting automotive panels from impact, chipping, and abrasion. Includes application instructions, standard operating procedures, and a detailed product list of related SEM automotive refinishing products.
	SEM636D Wheel Loader Operation and Maintenance Manual This comprehensive manual provides essential guidance for the safe and efficient operation, maintenance, and troubleshooting of the SEM636D Wheel Loader. It covers detailed safety information, technical specifications, operational procedures, and maintenance schedules to ensure optimal performance and longevity of the equipment.
	Especificacions tècniques de la carregadora de rodes SEM 650B Exploreu les especificacions tècniques detallades de la carregadora de rodes SEM 650B, incloent-hi el rendiment del motor, el sistema hidràulic, la transmissió, les dimensions i les capacitats. Fabricat per Shandong SEM Machinery Co., Ltd.
	Carregadora de rodes SEM 636D: especificacions, característiques i aplicacions Descobreix la carregadora de rodes SEM 636D, una màquina robusta i versàtil de la marca SEM de Caterpillar. Coneix les seves especificacions clau, el seu sistema hidràulic eficient, el seu sistema de transmissió fiable i la seva àmplia gamma d'aplicacions.
	SEM518 Compactor Technical Specifications Detailed technical specifications for the SEM518 compactor, including engine power, operating weight, dimensions, travel speed, and vibratory system data.

SEM 61983