Manual d'usuari del mòdul combinat Azurewave AW-NB100H WLAN 802.11n/b/g + Bluetooth 3.0HS i 4.0

1. Introducció

The Azurewave AW-NB100H is a highly integrated wireless local area network (WLAN) and Bluetooth combo module designed for embedded applications. This half-size mini card module provides IEEE 802.11 b/g/n Wi-Fi connectivity and Bluetooth 3.0HS & 4.0 capabilities, enabling high-speed wireless communication and digital content access without additional cables.

This manual provides essential information for the proper installation, operation, and maintenance of your AW-NB100H module. Please read it thoroughly before use.

2. Característiques del producte

• Compliant with IEEE 802.11 b/g/n wireless standards.
• Supports 1 (Transmit) x 1 (Receive) technology for WLAN and Bluetooth.
• WLAN RX diversity for improved signal reception.
• High-speed wireless connection up to 150 Mbps.
• Low power consumption and high performance design.
• Fully qualified Bluetooth 4.0 & 3.0HS.
• Enhanced Data Rate (EDR) compliant for both 2Mbps and 3Mbps supported.
• Full-speed operation with Piconet and Scatternet support.
• Utilizes Atheros AR1111 with AR1005 solution.

3. Configuració i instal·lació

The AW-NB100H is an internal component designed for integration into compatible devices such as laptops, smart TVs, or tablets. Installation typically involves opening the device chassis and connecting the module to a PCI Express Mini Card slot. Due to the technical nature of this installation, it is recommended that installation be performed by a qualified technician.

3.1 General Installation Steps (Consult Device Manual for Specifics):

1. Apagar: Ensure the host device is completely powered off and disconnected from all power sources.
2. Access Internal Components: Carefully open the host device's chassis to access the internal PCI Express Mini Card slot. Refer to your device's service manual for specific instructions.
3. Insereix el mòdul: Align the AW-NB100H module with the PCI Express Mini Card slot. Gently push the module into the slot until it is fully seated.
4. Mòdul segur: Secure the module with the appropriate screws or clips provided by the host device manufacturer.
5. Connecteu les antenes: Connect the appropriate WLAN and Bluetooth antennas to the module's connectors. Ensure a secure connection.
6. Xassís tancat: Carefully reassemble the host device's chassis.
7. Instal·leu els controladors: After powering on the device, install the necessary drivers for the Atheros AR1111 (WLAN) and AR1005 (Bluetooth) components. Drivers are typically provided by the device manufacturer or can be downloaded from the Azurewave support weblloc.

Image 1: The Azurewave AW-NB100H module, showing its compact form factor and connectors. The label displays model number AW-NB100H, IEEE 802.11 b/g/n - BT Combo PCIe minicard, and various regulatory compliance markings.

4. Instruccions de funcionament

4.1 WLAN (Wi-Fi) Operation:

1. Ensure the necessary WLAN drivers are installed on your operating system.
2. Access your operating system's network settings.
3. Cerca xarxes Wi-Fi disponibles.
4. Seleccioneu la xarxa desitjada i introduïu la contrasenya si cal.
5. Once connected, you can access the internet and local network resources.

4.2 Bluetooth Operation:

1. Ensure the necessary Bluetooth drivers are installed.
2. Enable Bluetooth in your operating system's settings.
3. Poseu el vostre dispositiu Bluetooth (per exemple, auriculars, ratolí) en mode d'emparellament.
4. On your host device, search for new Bluetooth devices.
5. Seleccioneu el dispositiu de la llista i seguiu les instruccions que apareixen a la pantalla per completar l'emparellament.

5. Manteniment

The AW-NB100H module requires minimal maintenance. As an internal component, it is generally protected from environmental factors. However, consider the following:

• Actualitzacions de controladors: Regularly check for updated WLAN and Bluetooth drivers from your device manufacturer or Azurewave's support weblloc per garantir un rendiment i una compatibilitat òptims.
• Neteja: If the host device's chassis is opened for other maintenance, ensure the area around the module is free from dust and debris. Use compressed air if necessary, but avoid direct contact with components.
• Inspecció física: Periodically inspect antenna connections to ensure they are secure.

6. Solució De Problemes

6.1 Problemes i solucions habituals:

• No Wi-Fi or Bluetooth Connection:
  • Verify that the module is correctly installed and seated in its slot.
  • Ensure antenna cables are securely connected.
  • Check if WLAN and Bluetooth are enabled in your operating system settings.
  • Reinstall or update the device drivers.
  • Reinicieu el dispositiu amfitrió.
• Velocitat Wi-Fi lenta:
  • Ensure you are within range of your Wi-Fi router.
  • Comproveu si hi ha interferències d'altres dispositius electrònics.
  • Update Wi-Fi drivers.
  • Verify your router settings and firmware are up to date.
• Dispositiu Bluetooth no s'emparella:
  • Assegureu-vos que el dispositiu Bluetooth estigui en mode de vinculació.
  • Comproveu si el Bluetooth està habilitat al dispositiu amfitrió.
  • Move the Bluetooth device closer to the host device.
  • Remove previous pairings of the device from your host system and try again.
  • Update Bluetooth drivers.

If issues persist after attempting these solutions, consult the support resources for your host device or contact Azurewave technical support.

7. Especificacions

8. Informació normativa

The AW-NB100H module complies with various international regulatory standards. Key compliance markings and identifiers include:

• Model: AR5B225
• Identificador FCC: PPD-AR5B225
• IC: 4104A-AR5B225
• Identificador CMIIT: 2011DJ0462
• Mèxic: RCPATAR11-0210
• CCAI: CCAI11LP0300T2
• RoHS: Complint
• Egipte: W-CWC-18
• Índia: ETA: 1063/2011/WRLO (Pb)
• Jordània: TRC/SS/2011/28
• KCC-CRM: ATH-AR5B225 (해당 무선설비는 운용 중 전파혼신 가능성이 있음 - This wireless equipment may cause radio interference during operation.)
• IDA Standards: Compleix amb les normes IDA DA 104328
• Marca CE: Indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).

El funcionament està subjecte a la condició que aquest dispositiu no provoqui interferències perjudicials.

9. Assistència i garantia

For technical support, driver downloads, or warranty information, please refer to the documentation provided by the manufacturer of your host device or visit the official Azurewave support website. Warranty terms and conditions are typically provided at the point of purchase or by the device manufacturer integrating this module.