Winjet CTWJ-0043-BC: Nissan Frontier 1998-04 Altezza Tail Lights

Producte acabatview

This manual provides detailed instructions for the installation, operation, and maintenance of your Winjet CTWJ-0043-BC Altezza Tail Lights, designed specifically for the Nissan Frontier 1998-2004 models. These tail lights are engineered to provide enhanced visibility and a modern aesthetic for your vehicle, ensuring compliance with SAE/DOT standards for street use.

Característiques principals:

• Completed set includes Left and Right Sides.
• SAE/DOT Compliance for street use, ensuring legal and safe operation.
• Constructed from High Quality OEM Grade ABS Plastic for durability.
• Designed for bolt-on installation, requiring no modification for a plug-and-play setup.
• Disseny impermeable per a un rendiment fiable en diverses condicions meteorològiques.

Compatibilitat

These tail lights are compatible with the following vehicle model:

• Nissan Frontier: 1998, 1999, 2000, 2001, 2002, 2003, 2004

Figura 1: Automotive Fitment Guide. This image illustrates the compatible vehicle model, the Nissan Frontier from 1998 to 2004, ensuring proper fitment for the tail light assembly.

Configuració i instal·lació

The Winjet Altezza Tail Lights are designed for a straightforward, bolt-on installation process. No complex wiring or vehicle modifications are typically required.

Eines necessàries:

• Basic hand tools (e.g., socket wrench, screwdriver) as needed for existing tail light removal.

Passos d'instal·lació:

1. Preparació: Ensure the vehicle's ignition is off and the parking brake is engaged. For safety, disconnect the negative terminal of the vehicle's battery.
2. Remove Old Tail Lights: Locate and remove the screws or fasteners holding the existing tail light assembly in place. Carefully pull the assembly away from the vehicle body.
3. Desconnecteu el cablejat: Disconnect the electrical harness from the old tail light assembly. Note the position of each bulb (running lights, turn signals, reverse lights) if you need to transfer them.
4. Transfer Bulbs (if applicable): If your new Winjet tail lights do not come with pre-installed bulbs, carefully transfer the bulbs from your original tail light assembly to the corresponding sockets on the new Winjet assembly. Ensure a secure fit.
5. Connect New Tail Lights: Connect the vehicle's electrical harness to the new Winjet tail light assembly. The design ensures the same harness can be used without rewiring.
6. Muntar nous llums posteriors: Align the new tail light assembly with the mounting points on the vehicle body. Secure it in place using the original screws or fasteners. Ensure a snug fit to prevent moisture ingress.
7. Funcionalitat de prova: Reconnect the vehicle's battery. Test all light functions: running lights, brake lights, turn signals, and reverse lights, to ensure proper operation before driving.

Figura 2: Installation Features. This image highlights the "Same Harness | No Rewiring" feature, showing standard light bulbs, and the "Factory Bolt-On Fitment" with a close-up of a mounting bolt, simplifying the installation process.

Instruccions de funcionament

Once installed, the Winjet Altezza Tail Lights operate in conjunction with your vehicle's existing electrical system. They are designed to function automatically when the vehicle's lighting controls are activated.

Funcions de llum:

• Llums de funcionament: Illuminate when the vehicle's headlights or parking lights are on, providing rear visibility.
• Senyals de gir: Flash when the turn signal lever is activated, indicating a change in direction.
• Llums de fre: Illuminate brightly when the brake pedal is pressed, signaling deceleration or stopping.
• Llums de marxa enrere: Illuminate when the vehicle is shifted into reverse gear, providing illumination and warning to others.

Figura 3: Tail Light Functions. This diagram clearly labels the positions of the Running Lights, Turn Signals, and Reverse Lights within the tail light assembly, illustrating their respective functions.

Manteniment

To ensure the longevity and optimal performance of your Winjet Altezza Tail Lights, follow these simple maintenance guidelines:

• Neteja regular: Clean the outer lens with a soft cloth and mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens.
• Inspeccionar per danys: Periodically check the tail light assemblies for any cracks, moisture inside the lens, or loose connections. Address any issues promptly.
• Substitució de bombetes: If a bulb burns out (for models using replaceable bulbs), replace it with the correct type and wattage as specified by your vehicle's manufacturer or the original bulb. Ensure the replacement bulb is securely seated.
• Inspecció del cablejat: Occasionally inspect the wiring harness for any signs of wear, fraying, or corrosion.

Resolució de problemes

If you encounter issues with your Winjet Altezza Tail Lights, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, it is recommended to consult a qualified automotive technician.

Especificacions

Informació de la garantia

Winjet provides a 12 mesos de garantia for this product. This warranty covers manufacturing defects and ensures the product functions as intended under normal use. Please retain your proof of purchase for warranty claims.

For specific terms and conditions of the warranty, please refer to the official Winjet weblloc o contacteu amb el servei d'atenció al client.

Atenció al client

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Winjet customer support through their official channels. Refer to the Winjet weblloc web per obtenir la informació de contacte més actualitzada.

Fabricant: Winjet

Weblloc: www.winjetinc.com

ASIN: B01A1500AI

Data de primera disponibilitat: 24 de març de 2016