Introducció
This manual provides detailed instructions for the proper installation, operation, and maintenance of your SHAD Top Master Fitting Kit, model Y0NM15ST. This kit is specifically designed for the Yamaha NMAX 125 (2015 model) to allow the secure mounting of a SHAD top case. Please read this manual thoroughly before installation and retain it for future reference.
Informació de seguretat
- Always ensure all bolts and fasteners are securely tightened according to the manufacturer's specifications.
- Do not exceed the maximum load capacity recommended for your top case and motorcycle.
- Regularly inspect the fitting kit for any signs of wear, damage, or loose components.
- Si no esteu segurs de cap pas, la instal·lació l'ha de dur a terme un tècnic qualificat.
- Utilitzeu sempre les eines adequades per a la instal·lació.
Contingut del paquet
Please verify that all components are present before beginning installation. Refer to the packaging for a complete list of included parts. Typically, the kit includes:
- Main support brackets
- Mounting plate (for top case)
- Elements de fixació (cargols, volanderes, femelles)
- Guia d'instal·lació (aquest document)
Configuració i instal·lació
This section guides you through the process of installing the SHAD Top Master Fitting Kit on your Yamaha NMAX 125 (2015).
Eines necessàries
- Conjunt de claus
- Conjunt de claus hexagonals
- Clau dinamométrica (recomanada)
- Thread-locking compound (optional, for added security)
Passos d'instal·lació
- Preparació de la motocicleta: Ensure the motorcycle is stable on its center stand or a suitable lift. Remove any existing rear rack or passenger grab handles if necessary, following your motorcycle's service manual.
- Position Main Brackets: Carefully align the main support brackets of the SHAD kit with the designated mounting points on the rear frame of your Yamaha NMAX 125. These points are typically located near the rear fender or under the passenger seat.
- Fixació inicial: Insert the provided bolts through the brackets and into the motorcycle's frame. Hand-tighten all fasteners initially.
- Col·loqueu la placa de muntatge: Secure the top case mounting plate to the main support brackets using the specified bolts and washers. Ensure the plate is level and correctly oriented.
- Progressive Tightening: Gradually tighten all bolts in a cross-pattern or alternating sequence. This ensures even pressure and proper alignment. Do not fully tighten any single bolt before others are snug.
- Parell final: Once all bolts are snug, use a torque wrench to tighten them to the specifications provided in the kit's supplementary instructions (if available) or your motorcycle's service manual for similar components. If no specific torque is given, ensure they are firmly secured without over-tightening.
- Comprovació final: Verify that the entire assembly is rigid and free from movement. Double-check all fasteners for tightness.
Figura 1: SHAD Top Master fitting kit installed on a Yamaha NMAX 125, ready for a top case. This image shows the rear of the scooter with the black metal mounting plate and support arms securely attached to the chassis, providing a stable platform for a top case.
Instruccions de funcionament
Once the SHAD Top Master Fitting Kit is securely installed, you can attach and detach your compatible SHAD top case.
- Attaching a Top Case: Align the base of your SHAD top case with the mounting plate. Gently push down until you hear a click, indicating it is securely locked. Always ensure the top case is firmly attached by attempting to lift it slightly.
- Detaching a Top Case: Refer to your specific SHAD top case manual for detachment instructions, as mechanisms may vary. Typically, this involves pressing a release button or lever, often located near the lock mechanism, and then lifting the case.
Figura 2: Yamaha NMAX 125 with the SHAD Top Master fitting kit and a SHAD top case securely mounted. The image displays the scooter from the side, highlighting the integrated appearance of the top case with the vehicle's design, providing additional storage capacity.
Manteniment
- Inspecció periòdica: Periodically check all bolts and fasteners for tightness, especially after long rides or off-road use. Re-tighten as necessary.
- Neteja: Clean the metal components of the fitting kit with a mild soap and water solution. Avoid abrasive cleaners or solvents that could damage the powder coating.
- Prevenció de la corrosió: If operating in corrosive environments (e.g., coastal areas, salted roads), consider applying a rust-inhibiting spray to exposed metal parts.
- Comprovació de danys: Inspect the brackets and mounting plate for any cracks, bends, or deformation. Replace damaged components immediately.
Resolució de problemes
- Loose Top Case: Ensure the top case is correctly aligned and fully clicked into place on the mounting plate. Check if the mounting plate itself is securely fastened to the support brackets.
- Vibration/Noise: Verify that all installation bolts are tightened to the correct torque. Excessive vibration could indicate loose fasteners or improper installation.
- Difficulty Attaching/Detaching Top Case: Ensure the mounting plate is clean and free of debris. Check for any obstructions or misalignment.
Especificacions
- Model: Y0NM15ST
- Marca: SHAD
- Material: Acer d'aliatge
- Acabat exterior: Recobriment en pols
- Pes de l'article: 2.9 quilos
- Dimensions del producte (L x A x A): 61.5 x 60 x 10 cm (24.2 x 23.6 x 3.9 polzades)
- Tipus de servei de vehicles: Motorcycle (Yamaha NMAX 125, 2015 model)
- Número de peça del fabricant: Y0NM15ST
- UPC: 084303586041
Informació de la garantia
SHAD products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official SHAD weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
Suport
If you encounter any issues or have questions not covered in this manual, please contact SHAD customer support. Visit the official SHAD weblloc web per obtenir dades de contacte i recursos addicionals.
