Einhell 18V 2.0Ah Power X-Change Lithium-Ion Battery User Manual

Introducció

The Einhell 18 V/2.0 Ah lithium-ion battery is an integral part of the Power X-Change modular series. This battery system is designed for compatibility with all Power X-Change series devices. It features an increased capacity for enhanced performance and longevity. The integrated 7-in-1 ABS Active Battery Management System utilizes a microprocessor to continuously monitor critical parameters such as temperature and voltage. High-quality lithium-ion cells are employed to resist self-discharge, and a smooth charging cycle contributes to extended battery life. A three-position LED charge level indicator is included for convenience, and the housing provides high-impact rubber protection. Built-in recessed handles facilitate effortless battery removal.

Informació de seguretat

Always observe the following safety precautions when handling lithium-ion batteries:

• Read all instructions before using the battery.
• Use only the charger specified by the manufacturer for recharging. A charger suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Quan no utilitzeu la bateria, manteniu-la lluny d'altres objectes metàl·lics com ara clips, monedes, claus, claus, cargols o altres objectes metàl·lics petits que puguin connectar-se d'un terminal a un altre. El fet de fer curt els terminals de la bateria pot provocar cremades o incendis.
• En condicions abusives, es pot expulsar líquid de la bateria; evitar el contacte. Si es produeix un contacte accidental, esbandiu amb aigua. Si el líquid entra en contacte amb els ulls, també busqueu ajuda mèdica. El líquid expulsat de la bateria pot causar irritació o cremades.
• No utilitzeu una bateria o un aparell que estigui danyat o modificat. Les bateries danyades o modificades poden presentar un comportament impredictible que provoca incendi, explosió o risc de lesions.
• No exposeu una bateria o un aparell al foc ni a una temperatura excessiva. L’exposició al foc o a temperatures superiors a 130 ° C (265 ° F) pot provocar explosions.
• Seguiu totes les instruccions de càrrega i no carregueu la bateria o l'aparell fora de l'interval de temperatura especificat a les instruccions. La càrrega inadequada o a temperatures fora de l'interval especificat pot danyar la bateria i augmentar el risc d'incendi.
• Ensure proper disposal of used batteries according to local regulations.

Producte acabatview

Característiques clau

• LED indicator for charging level, 3 positions.
• A modern technique: the microprocessor ensures permanent management and control of parameters such as temperature, voltagi etc.
• Gradual charging with full discharge, which ensures a long service life.
• High-quality Lithium-Ion cells prevent total self-discharge.
• The battery can be removed and attached easily thanks to ergonomic notches.

Guia visual

Vídeos de productes

Configuració

Carregant la bateria

The Einhell 18V 2.0Ah Power X-Change battery is sold without a charger. Use only an original Einhell Power X-Change charger compatible with 18V lithium-ion batteries. Refer to your charger's instruction manual for specific charging procedures.

1. Connecteu el carregador a una presa de corrent adequada.
2. Feu lliscar la bateria al carregador fins que encaixi al seu lloc.
3. Monitor the LED indicator on the battery or charger to determine the charging status. A red light typically indicates charging, while a green light signifies a full charge.
4. Un cop estigui completament carregat, traieu la bateria del carregador.

Inserting and Removing the Battery from a Tool

Ensure the tool is switched off before inserting or removing the battery.

• Per inserir: Align the battery pack with the battery port on the tool. Slide the battery into the tool until it locks securely into place with an audible click.
• Per eliminar: Press the battery release button(s) on the battery pack or tool, then slide the battery out of the tool.

Instruccions de funcionament

The Einhell 18V 2.0Ah Power X-Change battery is designed to power a wide range of Einhell Power X-Change cordless tools. Always ensure the battery is fully charged before beginning any task to maximize performance and runtime.

• Before operating any tool, ensure the battery is securely attached.
• Refer to the specific tool's instruction manual for detailed operating procedures and safety guidelines.
• Monitor the battery's LED charge indicator during use to anticipate when recharging will be necessary.
• Avoid completely draining the battery, as this can reduce its overall lifespan. Recharge when the power significantly drops or the indicator shows low charge.

Manteniment

Neteja

Keep the battery terminals clean and free from dirt or debris. Use a dry cloth to wipe the battery casing. Do not use water or chemical cleaning agents.

Emmagatzematge

For optimal battery life, store the battery in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing the battery in a completely discharged state for extended periods. It is recommended to store lithium-ion batteries with a partial charge (around 50%).

Cura de la bateria

• No exposeu la bateria a la humitat o l'aigua.
• Protect the battery from impacts and drops.
• No intenteu desmuntar ni modificar la bateria.
• If the battery becomes excessively hot during use or charging, discontinue use and allow it to cool down before proceeding.

Resolució de problemes

La bateria no es carrega

• Assegureu-vos que el carregador estigui correctament connectat a una presa de corrent que funcioni.
• Verify that the battery is correctly seated on the charger.
• Check the charger's indicator lights for any error codes or unusual behavior.
• Assegureu-vos que la bateria i el carregador estiguin dins del rang de temperatura de funcionament recomanat.
• If the issue persists, try another compatible charger or battery if available to isolate the problem.

Battery Not Powering Tool

• Check the battery's charge level using the LED indicator. Recharge if necessary.
• Assegureu-vos que la bateria estigui completament i de manera segura inserida a l'eina.
• Verify that the tool itself is functioning correctly (e.g., check for blockages, switch issues).
• Confirm that the tool is compatible with 18V Power X-Change batteries.
• If the tool has an overload protection feature, it might have been triggered. Allow the tool to cool down.

Especificacions

Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the official Einhell weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.

Official Einhell Weblloc: www.einhell.com