Manual d'instruccions

1. Introducció

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Makita DTW1001Z 18V LXT Brushless 3/4in Impact Wrench. Please read and understand all instructions before use to ensure proper handling and to prevent injury or damage.

The Makita DTW1001Z is a cordless impact wrench designed for heavy-duty fastening applications. It features an 18V LXT slide-type battery system (battery and charger not included), a brushless motor for extended tool life and efficiency, and electronic 3-stage impact power selection. It delivers high tightening and nut busting torque for demanding tasks.

2. Instruccions generals de seguretat

Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves when operating the impact wrench. Ensure your work area is clean, well-lit, and free from obstructions. Keep bystanders, especially children, away from the work area. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.

Before making any adjustments, changing accessories, or storing the tool, always remove the battery pack. Avoid accidental starting. Ensure the switch is in the off-position before inserting the battery pack. Do not force the tool; use the correct tool for your application. Maintain tools with care; keep cutting tools sharp and clean for better and safer performance. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool repaired before use.

3. Components del producte

Familiarize yourself with the main components of your Makita DTW1001Z impact wrench:

• 3/4" Square Drive Shank: Per fixar endolls d'impacte.
• Interruptor d'activació: Controls the tool's speed.
• Interruptor endavant/enrere: Canvia el sentit de gir.
• Impact Power Selection Button: Adjusts the impact force (Hard/Medium/Soft).
• Llum de treball LED: Il·lumina la zona de treball.
• Port de la bateria: For inserting the 18V LXT battery pack.
• Clip de cinturó: For convenient carrying (may be included or optional).

Figura 1: Mésview of the Makita DTW1001Z Impact Wrench, showing the main body, handle, and square drive.

Figura 2: lateral view of the impact wrench, highlighting the trigger, forward/reverse switch, and impact power selection button.

4. Configuració

4.1 Instal·lació i extracció de la bateria

The Makita DTW1001Z requires an 18V LXT slide-type battery pack (not included). Ensure the battery is fully charged before use.

1. To install: Align the battery pack with the grooves in the tool's housing and slide it in until it locks into place with a slight click.
2. Per treure-la: premeu el botó d'alliberament de la bateria i feu-la lliscar cap a fora de l'eina.

4.2 Attaching Impact Sockets

This impact wrench features a 3/4" square drive shank. Use only impact-rated sockets designed for use with impact wrenches.

1. Assegureu-vos que la bateria estigui treta de l'eina.
2. Push the desired 3/4" impact socket onto the square drive shank until it clicks securely into place.
3. To remove, pull the socket firmly off the drive shank.

Figure 3: The impact wrench with an optional belt clip installed, demonstrating a common accessory attachment point.

5. Instruccions de funcionament

5.1 Engegada/Apagada i Control de Velocitat

The tool is activated by pressing the trigger switch. The speed is variable and controlled by the amount of pressure applied to the trigger. ReleasinEl gallet apaga l'eina.

5.2 Rotació endavant/enrere

The forward/reverse switch is located above the trigger. Push the switch to the left for forward rotation (tightening) and to the right for reverse rotation (loosening). Ensure the switch is fully engaged in the desired position before operating the tool.

5.3 Electronic 3-Stage Impact Power Selection

The DTW1001Z features three impact power settings (Hard, Medium, Soft) to match the application. Use the impact power selection button, typically located near the base of the handle, to cycle through the settings. An indicator light will show the selected mode.

• Hard Mode: For maximum tightening torque (up to 1,050 Nm) and nut busting torque (up to 1,700 Nm) on large or stubborn fasteners.
• Mode mitjà: For general fastening applications requiring significant torque but less than maximum.
• Mode suau: For delicate applications or when precise control is needed to prevent overtightening or damage to smaller fasteners.

5.4 Fastening and Loosening

Position the impact socket squarely onto the fastener. Apply firm, steady pressure to the tool and press the trigger. Allow the tool to impact until the fastener is tightened or loosened to the desired degree. Avoid prolonged impacting after the fastener is fully seated to prevent damage to the fastener or workpiece.

Figure 4: The impact wrench being used to tighten a large bolt, demonstrating proper hand placement and tool engagement.

Figure 5: The impact wrench in action on a heavy-duty fastening task, illustrating its capability for demanding applications.

6. Manteniment

Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de l'eina. Desconnecteu sempre la bateria abans de realitzar qualsevol manteniment.

6.1 Neteja

Netegeu l'exterior de l'eina amb un drap netamp cloth. Do not use harsh chemicals or abrasive cleaners. Keep the ventilation openings clear of dust and debris to prevent overheating. Periodically clean the square drive shank and ensure it is free of rust or buildup.

6.2 Emmagatzematge

Store the tool in a dry, secure location out of reach of children. Remove the battery pack before storage. Avoid storing the tool in direct sunlight or in areas with extreme temperatures.

6.3 Servei

This tool features a brushless motor, which generally requires less maintenance than brushed motors. However, if the tool requires service or repair, contact an authorized Makita service center. Use of non-genuine or non-recommended parts or accessories may void your warranty and compromise tool safety.

7. Solució De Problemes

If you experience issues with your Makita DTW1001Z, refer to the following common troubleshooting steps:

• L'eina no s'inicia: Ensure the battery pack is fully charged and properly inserted. Check that the forward/reverse switch is fully engaged in either the forward or reverse position, not in the neutral lock position.
• Reduced power or intermittent operation: The battery pack may be low on charge. Recharge the battery. Ensure the battery terminals and tool contacts are clean.
• Vibració excessiva o soroll inusual: Stop operation immediately. Check for loose fasteners on the tool or damaged accessories. If the issue persists, discontinue use and contact an authorized service center.
• Fastener not tightening/loosening: Ensure the correct impact socket is used and is fully seated. Verify the impact power selection is appropriate for the task.

For problems not covered here, contact an authorized Makita service representative.

8. Especificacions

Note: Specifications are subject to change without notice. Battery and charger are sold separately.

9. Garantia i Suport

Makita offers a 1-year manufacturer warranty on this product. An additional 2 years of warranty coverage may be available upon product registration within 30 days of purchase. Please refer to the official Makita website or your product documentation for detailed warranty terms and conditions.

Important: Aquesta garantia no s'aplica quan s'instal·len peces o accessoris no originals o no recomanats a l'eina. L'ús de bateries i carregadors no originals o compatibles amb eines Makita invalidarà la garantia Makita per a les nostres eines.

For technical support, service, or warranty claims, please contact your local authorized Makita service center or visit the official Makita weblloc per obtenir informació de contacte.