Introducció
Thank you for choosing the Franke FFPD20850 Bern Semi-Pro Single Handle Pull-Down Kitchen Faucet. This manual provides essential information for the safe installation, operation, and maintenance of your new faucet. Please read it thoroughly before beginning installation or use, and retain it for future reference.

Image: The Franke Bern Semi-Pro Faucet in a kitchen setting, demonstrating its aesthetic integration and functionality during food preparation.
Informació de seguretat
- Tanqueu sempre el subministrament principal d'aigua abans d'instal·lar o fer el manteniment de l'aixeta.
- Utilitzeu l'equip de protecció individual (EPI) adequat, com ara ulleres i guants de seguretat, durant la instal·lació.
- Assegureu-vos que totes les connexions estiguin ben fixades per evitar fuites. No les apreteu massa.
- Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un lampista qualificat.
- Mantingueu les peces petites allunyades dels nens per evitar perills d'asfixia.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Franke FFPD20850 Bern Semi-Pro Kitchen Faucet
- Mounting Hardware (Fast-IN Quick Install System components)
- Mànegues de subministrament d'aigua calenta i freda
- 10-inch Base Plate (for 1 or 3-hole installation)
- Guia d'instal·lació (aquest manual)

Image: An illustration of the faucet components, including the main body, pull-down spray head, and mounting hardware.
Instruccions d'instal·lació
The Franke Fast-IN Quick Install System simplifies faucet installation from above the countertop. A 1-3/8-inch hole is required for installation.
- Preparar la pica: Ensure the sink hole is clean and free of debris. If using the 10-inch base plate for a 3-hole sink, place it over the holes.
- Feed Hoses: Feed the hot and cold water supply hoses and the pull-down spray hose through the sink hole from above the countertop.
- Posició de l'aixeta: Place the faucet base onto the sink hole, ensuring it is properly aligned.
- Secure with Fast-IN System: From above the countertop, locate the mounting screws on the Fast-IN faucet base. Use a screwdriver to tighten these screws. As you tighten, two mounting cleets will activate and rise from underneath the countertop, securing the faucet firmly to the mounting surface. Continue tightening until the faucet is stable and secure.
- Connecteu les línies d'aigua: Underneath the sink, connect the hot and cold water supply hoses to the corresponding hot and cold water supply valves. Ensure connections are hand-tight, then use a wrench for a quarter-turn more. Do not overtighten.
- Connecteu la mànega de polvorització: Connect the pull-down spray hose to the quick-connect fitting on the faucet's main body. Ensure it clicks securely into place.
- Pes d'instal·lació: Attach the counterweight to the pull-down spray hose at the indicated position (typically 6-8 inches from the bottom of the loop) to ensure smooth retraction of the spray head.
- Aixeta de prova: Slowly turn on the main water supply. Check for any leaks at all connections. Operate the faucet handle and spray head to ensure proper function.
Video: This video demonstrates the installation process of a Franke Fast-IN Faucet, highlighting the simplified steps for securing the faucet from above the countertop.
Instruccions de funcionament
Your Franke Bern Semi-Pro Faucet features a single handle for water flow and temperature control, and a dual-function pull-down spray head.
- Cabal i temperatura de l'aigua:
- Lift the single lever handle to turn on the water and control flow volume.
- Moveu la maneta cap a l'esquerra per a aigua calenta i cap a la dreta per a aigua freda.
- The handle has a 10-90 degree movement range, designed to avoid hitting a wall if installed close to one.
- Capçal de polvorització desplegable:
- Grasp the spray head and pull it down from the spout. The flexible hose and flex spring allow for maximum coverage.
- Dual Function Spray: Press the button on the spray head to toggle between a full stream and a needle spray. The spray mode will remain active until you switch it again, even if the water is turned off and on.
- After use, guide the spray head back into its docking position on the spout.

Imatge: Una imatge detallada view of the pull-down spray head, showing the button for switching between full and needle spray functions.
Manteniment i cura
Proper care will ensure the longevity and appearance of your Franke faucet.
- Neteja: Netegeu l'aixeta regularment amb un drap suau i sabó suau. Eviteu netejadors abrasius, productes químics agressius o fregalls, ja que poden danyar l'acabat.
- Manteniment de l'airejador: Periodically unscrew the aerator from the spray head and clean any mineral deposits or debris that may affect water flow.
- Cura de la mànega: Ensure the pull-down hose moves freely and is not obstructed under the sink.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Baix cabal d'aigua | Airejador obstruït; vàlvules de subministrament parcialment tancades. | Clean the aerator. Ensure hot and cold water supply valves are fully open. |
| Fuites a les connexions | Connexions soltes; juntes tòriques danyades. | Check and tighten all connections. Replace O-rings if damaged. |
| El capçal de polvorització no es retreu | Improperly positioned counterweight; obstruction under sink. | Adjust the counterweight position on the hose. Clear any obstructions. |
| Problemes de temperatura de l'aigua | Connexió incorrecta de la línia de subministrament; problemes amb l'escalfador d'aigua. | Verifiqueu que les línies de subministrament d'aigua calenta i freda estiguin connectades correctament. Comproveu la configuració de l'escalfador d'aigua. |
If problems persist after attempting these solutions, please contact Franke customer support.
Especificacions
- Nom del model: FFPD20850
- Marca: Franke
- Material: Acer inoxidable
- Tipus d'acabat: Lacat
- Color: Acer inoxidable
- Nombre de nanses: 1
- Tipus d'instal·lació: Single Hole (1 or 3-hole compatible with included base plate)
- Required Hole Size: 1-3/8 polzades
- Caudal: 1.75 gpm
- Alçada del broc: 8.25 polzades
- Dimensions del producte: 8.25 "P x 10.5" W x 23.75" H
- Pes de l'article: 8.33 lliures
- Característiques especials: Easy to Install (Fast-IN System), Pull Down Sprayer
- Usos recomanats: Cuina
Garantia i Suport
Franke stands behind its products with comprehensive warranty coverage:
- Garantia limitada de per vida: On the faucet's mechanical components and structure.
- 5 any de garantia: On the finish.
For warranty claims, technical assistance, or to order replacement parts, please contact Franke Customer Service. Refer to the official Franke website for the most up-to-date contact information and detailed warranty terms.
Oficial Weblloc: www.franke.com





