1. Introducció
This manual provides detailed instructions for the installation, programming, operation, and maintenance of your Weiser Powerbolt Electronic Deadbolt, Model 9GED14600-101. This electronic deadbolt offers enhanced security and convenience with its keyless touchpad entry and traditional key access. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the lifespan of your product.
Figura 1: Frontal view of the Weiser Powerbolt Electronic Deadbolt, showcasing the keypad and keyhole. This image displays the gold finish of the lock.
2. Informació important de seguretat
Observeu les següents precaucions de seguretat per evitar lesions o danys al producte:
- Do not attempt to disassemble or modify the lock beyond the instructions provided in this manual.
- Feu servir només el tipus de pila especificat (4 piles AA). No barregeu piles velles i noves ni piles de tipus diferents.
- Keep all components, especially small parts, out of reach of children.
- Ensure proper alignment during installation to prevent binding or excessive force on the deadbolt mechanism.
- Protegiu el teclat numèric de la humitat excessiva o de l'exposició directa a l'aigua.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Muntatge de teclat exterior
- Interior Assembly (Turn Knob)
- Pestillo de cèrcol
- Placa de vaga
- Placa de muntatge
- Cargols de muntatge
- Claus (2)
- SmartKey Learning Tool
- Installation Guide / Drilling Template
Figura 2: lateral view of the interior assembly of the Weiser Powerbolt Electronic Deadbolt, showing the turn knob and battery compartment area.
4. Instruccions d'instal·lació
Before you begin, measure your door's backset, cross bore, and thickness to ensure compatibility. This lock is designed for standard door preparations with a 2-1/8" bore hole and 2-3/8" or 2-3/4" backsets.
- Prepara la porta: If installing on a new door, use the provided drilling template to prepare the necessary holes. For existing doors, ensure the bore hole and backset are compatible.
- Instal·leu el tancament: Insert the deadbolt latch into the edge of the door. Ensure the "UP" arrow on the latch is pointing upwards. Adjust the backset if necessary (2-3/8" or 2-3/4"). Secure with screws.
- Instal·leu el teclat exterior: Feed the cable from the exterior keypad assembly through the cross bore hole. Position the keypad flush against the door.
- Instal·leu la placa de muntatge: Route the cable through the mounting plate. Secure the mounting plate to the door using the provided screws, ensuring it holds the exterior keypad in place.
- Connectar els cables: Connect the cable from the exterior keypad to the interior assembly. Ensure the connection is secure.
- Instal·lació del conjunt interior: Position the interior assembly over the mounting plate, aligning the turn knob shaft with the deadbolt mechanism. Secure the interior assembly to the mounting plate with the remaining screws.
- Instal·leu les bateries: Open the battery cover on the interior assembly and insert 4 new AA alkaline batteries. Observe correct polarity. Close the battery cover.
- Prova de funcionament: With the door open, test the lock's function using the turn knob and the keypad with the default code (if applicable) or a newly programmed code. Ensure the deadbolt extends and retracts smoothly without obstruction.
5. Instruccions de programació
The Powerbolt Electronic Deadbolt allows for the creation of a Master Code and up to 6 User Codes. The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.
Figure 3: Visual representation of key features of the Powerbolt 2, including One Touch Locking, Master Code, User Codes, Bump-Proof, Pick-Proof, and Kick-In Resistant technology.
5.1. Configuració del codi mestre
The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.
- Press the "Program" button (usually located on the interior assembly).
- Enter a new 4-8 digit Master Code.
- Premeu el botó "Bloqueja".
- Re-enter the new Master Code.
- Press the "Lock" button again. A successful programming tone will sound.
5.2. Afegir codis d'usuari
You can store up to 6 unique user codes for access.
- Introdueix el teu codi mestre.
- Press the "Program" button.
- Press "1" (for adding a user code).
- Enter a new 4-8 digit User Code.
- Press the "Lock" button. A successful programming tone will sound.
5.3. Deleting User Codes
- Introdueix el teu codi mestre.
- Press the "Program" button.
- Press "2" (for deleting a user code).
- Introduïu el codi d'usuari que vulgueu suprimir.
- Press the "Lock" button. A successful programming tone will sound.
5.4. Enabling/Disabling Auto-Lock
The lock can be set to automatically re-lock 30 seconds after unlocking.
- Per permetre: Enter Master Code, press "Program", press "3", press "Lock".
- Per desactivar: Enter Master Code, press "Program", press "4", press "Lock".
6. Instruccions de funcionament
6.1. Tancant la porta amb clau
- From Exterior: Press the "Lock" button on the keypad. The deadbolt will extend.
- Des de l'interior: Rotate the turn knob to the locked position.
6.2. Obrint la porta
- Ús d'un codi d'usuari: Enter a valid 4-8 digit User Code on the keypad. The deadbolt will retract.
- Ús d'una clau: Insert the key into the keyhole and turn to unlock.
- Des de l'interior: Rotate the turn knob to the unlocked position.
7. Manteniment
7.1. Substitució de la bateria
The lock requires 4 AA alkaline batteries. A low battery indicator will alert you when batteries need replacement. Replace all four batteries simultaneously with new ones.
- Traieu la coberta de la bateria del conjunt interior.
- Traieu les piles velles.
- Introduïu 4 piles alcalines AA noves, assegurant-vos de la polaritat correcta (+/-).
- Substituïu la tapa de la bateria.
Nota: Replacing batteries does not erase programmed codes.
7.2. Neteja
Netegeu el pany amb un drap suauamp drap. Eviteu netejadors o dissolvents abrasius, ja que poden danyar l'acabat i els components electrònics.
7.3. Recodificació de SmartKey
The SmartKey cylinder allows you to rekey your lock to a new key in seconds. Refer to the separate SmartKey rekeying instructions provided with your lock or visit the Weiser website for a video tutorial. You will need your existing key, the new key, and the SmartKey learning tool.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El pany no respon a les entrades del teclat. | Dead batteries. Incorrect code entered. Keypad malfunction. | Replace batteries. Ensure correct code is entered. Use the key to unlock and contact support if issue persists. |
| El forrellat no s'estén ni es retreu completament. | Misalignment during installation. Obstruction in door frame. Low batteries. | Check door and frame for obstructions. Verify lock alignment. Replace batteries. |
| Auto-lock feature not working as expected. | Auto-lock feature is disabled. | Refer to Section 5.4 to enable the auto-lock feature. |
| Lock makes unusual noises or jams. | Mechanical issue, potential deadbolt barrel misalignment or damage. | Ensure the deadbolt barrel is not obstructed or misaligned. If the issue persists, contact Weiser customer support. |
| No es poden programar codis nous. | Incorrect Master Code. Program button not pressed correctly. | Verify Master Code. Ensure the Program button is pressed firmly. Refer to Section 5. |
9. Especificacions del producte
- Model: 9GED14600-101
- Marca: Weiser
- Tipus de bloqueig: Claveta electrònica del teclat
- Material: Llautó
- Color: Or
- Dimensions (L x A x A): 6 x 11.13 x 4 polzades
- Pes de l'article: 2.4 lliures
- Font d'alimentació: 4 piles AA (no incloses)
- Característica especial: Battery Indicator, SmartKey Rekeying
- Part posterior: Ajustable 2-3/8" o 2-3/4"
- Forat de perforació: 2-1/8"
- Codis d'usuari: Fins a 6
- ANSI/BHMI Rating: Grau 3
10. Garantia i atenció al client
For warranty information, technical assistance, or to purchase replacement parts, please contact Weiser customer support directly. Details can typically be found on the official Weiser weblloc web o dins de l'embalatge del producte.
Weiser Official Weblloc: www.weiserlock.com
Please have your model number (9GED14600-101) and purchase date available when contacting support.
