Introducció
This manual provides instructions for identifying and using your SILCA replacement key for Thule car rack systems. These keys are compatible with various Thule products including roof racks, cargo boxes, carriers, and crossbars that use key codes in the N001-N250 or N001R-N250R range.
Image: A single SILCA Thule replacement key, silver in color, designed to replace lost or damaged keys for Thule car rack systems.
Key Identification and Ordering
To ensure you receive the correct replacement key, it is crucial to accurately identify your existing key code. The original key code is typically stamped on the front side of the lock cylinder, near the keyhole, or on your original key.
- Locate Your Key Code: Examine your existing Thule lock cylinders or original keys for a stamped code. Thule key codes are usually in the format N001-N250 or N001R-N250R.
- Casos especials: Some vehicle brands like BMW, MINI, Volvo, Audi, VW, or Mercedes may use the same code but without the 'N' prefix. Confirm your specific requirement.
- Ordre: When ordering, provide only the identified key code. You will receive one code-cut key.
If you require a lock cylinder removal tool, specify the code D1251 or D1252, or simply type CTRL (control key for core/lock/cylinder removal) when ordering.
Ús de claus
Once you have received your replacement key, follow these steps to use it with your Thule lock cylinders:
- Inseriu la clau: Gently insert the replacement key into the lock cylinder.
- Gireu per desbloquejar/bloquejar: Turn the key to the appropriate position to unlock or lock your Thule accessory.
- Funcionament suau: If the key feels stiff, apply a small amount of graphite lubricant or a non-petroleum-based spray lubricant (like garage door spray lube, not WD-40) into the keyhole before re-inserting the key.
Video: Demonstration of inserting and removing a key from a Thule lock core. This video shows the proper technique for engaging and disengaging the key with the lock mechanism.
Video: Guide on what to do if you are unable to insert the control key into the lock core. This video provides troubleshooting steps for common key insertion issues.
Video: Demonstration of a 4-pack of lock cores for Thule, showing their design and function as replacement parts for Thule rack cores.
Vídeo: Acabatview of lock cores for Thule roof racks. This video illustrates the lock core components and their function within a Thule roof rack system.
Manteniment
- Lubricació: Periodically apply a small amount of graphite lubricant or a non-petroleum-based spray lubricant to the lock cylinders to ensure smooth operation and prevent sticking. Avoid using oil-based lubricants like WD-40 as they can attract dirt and grime.
- Neteja: Keep the key and lock cylinder free from dirt, dust, and debris. Use a soft cloth to wipe down the key and the exterior of the lock.
- Emmagatzematge: Store spare keys in a safe, memorable location to prevent loss.
Resolució de problemes
- La clau no gira:
- Ensure the key is fully inserted into the lock cylinder.
- Apply lubricant to the lock cylinder as described in the Maintenance section.
- Verify that the key code matches the lock cylinder.
- Difficulty Inserting Key:
- Check for any obstructions in the keyhole.
- Assegureu-vos que la clau estigui orientada correctament.
- Lubricate the keyhole.
- Clau perduda:
- Refer to the "Key Identification and Ordering" section to order a new key using the code found on your lock cylinder.
Especificacions
| Marca | SILCA |
| Número de model | BT2 |
| Material | Acer d'aliatge |
| Color | Plata |
| Pes de l'article | 4 unces |
| Quantitat de paquet d'articles | 1 |
| Mode d'operació | Manual |
| Compatible Key Codes | N001-N250, N001R-N250R |
Garantia i Suport
For warranty information or further support, please refer to the manufacturer's official website or contact their customer service. Ensure you have your product details and purchase information available when seeking support.
Fabricant: Silca
Botiga de marca: Visit the SILCA Store on Amazon
