TAYLOR 755841933B Glass Digital Scale User Manual

1. Introducció

Thank you for choosing the TAYLOR 755841933B Glass Digital Scale. This manual provides essential information for the safe and effective use of your new scale. Please read it thoroughly before operation and retain it for future reference.

2. Informació de seguretat

• Always place the scale on a hard, flat surface. Using it on soft surfaces like carpet may result in inaccurate readings.
• La plataforma de vidre pot ser relliscosa quan està mullada. Assegureu-vos que la superfície estigui seca abans de pujar a la bàscula.
• No supereu la capacitat màxima de pes de 400 lliures (180 kg).
• Avoid dropping the scale or subjecting it to strong impacts, as this may damage the glass platform or internal components.
• This scale is intended for personal use only and is not a medical device.
• Mantingueu les piles fora de l'abast dels nens.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• TAYLOR 755841933B Glass Digital Scale
• Piles AAA (2)
• Manual d'instruccions (aquest document)

4. Configuració

4.1 Instal·lació de la bateria

1. Localitzeu el compartiment de la bateria a la part inferior de la bàscula.
2. Obriu la tapa del compartiment de la bateria.
3. Introduïu les dues piles AAA, assegurant-vos de la polaritat correcta (+ i -) tal com s'indica a l'interior del compartiment.
4. Tanqueu bé la tapa del compartiment de la bateria.

4.2 Initial Placement and Calibration

For accurate readings, the scale must be placed on a hard, flat, and stable surface. Avoid carpets or uneven flooring.

Image: The TAYLOR 755841933B Glass Digital Scale, featuring a black tempered glass platform and an LCD display. The scale is rectangular with rounded corners.

Before first use or after moving the scale, perform an initial calibration:

1. Gently step onto the scale, then immediately step off.
2. The display will show '0.0' or a similar reading, then turn off. This indicates the scale has calibrated.

4.3 Unit Selection (Pounds/Kilograms)

If your scale supports unit conversion, a switch or button is typically located on the underside of the scale, near the battery compartment. Press this button to toggle between pounds (lb) and kilograms (kg).

5. Instruccions de funcionament

5.1 Prendre una mesura

1. Ensure the scale is on a hard, flat surface and has been calibrated (see Section 4.2).
2. Step onto the scale with bare feet, standing still and centered on the platform.
3. Your weight will appear on the LCD display. The reading will flash or stabilize to indicate the final measurement.
4. Step off the scale. The scale will automatically turn off after a few seconds to conserve battery life.

For consistent results, weigh yourself at the same time of day, under similar conditions.

6. Manteniment

6.1 Neteja

Per netejar la bàscula, netegeu la superfície amb aiguaamp cloth and mild detergent. Do not use abrasive cleaners or immerse the scale in water. Dry thoroughly after cleaning.

6.2 Substitució de la bateria

Quan la pantalla mostri "Lo" o s'enfosqueixi, és hora de substituir les piles. Seguiu els passos d'instal·lació de les piles de la secció 4.1.

6.3 Emmagatzematge

Store the scale in a cool, dry place. Avoid storing it vertically for extended periods, as this may affect accuracy.

7. Solució De Problemes

• No Display / Scale Not Turning On: Comproveu si les piles estan instal·lades correctament i no estan esgotades. Canvieu les piles si cal.
• Lectures inexactes: Ensure the scale is on a hard, flat surface. Recalibrate the scale by stepping on and off. Avoid moving the scale between measurements.
• 'Lo' on Display: Indicates low battery. Replace the AAA batteries.
• 'Err' or 'O-Ld' on Display: Indicates the scale is overloaded. The weight capacity has been exceeded. Step off the scale immediately.

8. Especificacions

9. Informació de la garantia

TAYLOR products are manufactured to the highest quality standards. This scale is backed by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or visit the manufacturer's weblloc web per conèixer els termes i condicions específiques de la garantia.

10. Atenció al client

For further assistance, troubleshooting, or warranty claims, please contact TAYLOR customer support. Contact information can typically be found on the product packaging or the official TAYLOR weblloc.