Manual d'usuari del commutador intel·ligent fàcil PoE Gigabit de 8 ports TP-Link TL-SG108PE V3

1. Producte acabatview

The TP-Link TL-SG108PE V3 is an 8-port Gigabit Easy Smart Switch with 4 Power over Ethernet (PoE+) ports. It is designed to provide a simple and effective solution for expanding network capacity while supplying power to compatible devices over Ethernet cables.

Figura 1: Frontal view of the TP-Link TL-SG108PE V3 8-Port Gigabit PoE Switch, showing 8 RJ45 ports, Power and PoE Max LEDs, and a Reset button. Ports 1-4 are marked for PoE.

Característiques principals:

• Configuració PoE de 8 ports Gigabit complet flexible: Features 4 PoE+ (802.3at/af) 10/100/1000 Mbps RJ45 ports, each providing up to 30W, with a total PoE power budget of 64W. Includes 4 additional Gigabit non-PoE ports for high-speed connections.
• Gestió intel·ligent fàcil: Ofertes webinterfície de gestió basada en i una utilitat de configuració intel·ligent per a una configuració i supervisió de xarxa senzilles.
• Segmentació de la xarxa: Admet funcions VLAN per millorar la seguretat de la xarxa mitjançant la segmentació del trànsit.
• Recuperació automàtica PoE: Automatically detects and reboots unresponsive PoE-powered devices, ensuring continuous operation without manual intervention.
• Plug and Play: Designed for easy setup without requiring software installation or complex configuration.
• Característiques avançades del programari: Inclou QoS 802.1p/DSCP basat en ports per a la priorització del trànsit i IGMP Snooping per optimitzar la transmissió de dades de vídeo i veu.
• Disseny físic: Compact desktop design, wall-mountable, and fanless for silent operation.

2. Contingut del paquet

Comproveu que el vostre paquet contingui els elements següents:

• Commutador TP-Link TL-SG108PE
• Adaptador d'alimentació
• Guia d'instal·lació
• Peus de goma

3. Configuració i instal·lació

Follow these steps to set up your TL-SG108PE switch:

1. Prepare the Switch: Place the switch on a stable, flat surface or mount it to a wall using appropriate hardware (not included). Ensure adequate ventilation around the device. Attach the included rubber feet to the bottom of the switch if placing it on a desktop.
2. Connecteu-vos a l'alimentació: Connect the provided power adapter to the switch's power port and then plug the adapter into a standard electrical outlet. The Power LED on the switch will illuminate.
3. Connectar dispositius de xarxa:
   • Connect your router or main network device to any of the 8 Gigabit RJ45 ports using an Ethernet cable.
   • For PoE-powered devices (e.g., IP cameras, VoIP phones, wireless access points), connect them to ports 1-4. The switch will automatically detect and provide power to these devices.
   • For non-PoE devices (e.g., computers, printers, network-attached storage), connect them to any of the 8 ports.
4. Verifica les connexions: Check the LED indicators for each connected port. A solid green LED indicates a 1000 Mbps link, while a yellow LED indicates a 10/100 Mbps link. A flashing LED indicates activity. For PoE ports (1-4), a solid green PoE LED indicates power is being supplied, and a flashing green LED indicates a fault.

Figure 2: Basic connection diagram for the TL-SG108PE switch.

4. Funcionament de l'interruptor

The TL-SG108PE is an Easy Smart Managed Switch, offering both plug-and-play functionality and advanced management options.

4.1 Funcionament bàsic (connectar i utilitzar)

Once connected as described in the Setup section, the switch will automatically detect and configure connected devices. No further action is required for basic network connectivity.

4.2 Gestió avançada

For advanced features such as VLAN, QoS, and IGMP Snooping, access the switch's web-based management interface or use the smart configuration utility.

Figure 3: Accessing the management utility for advanced configuration.

Accés a la interfície de gestió:

1. Assegureu-vos que l'ordinador estigui connectat al commutador.
2. Refer to the Installation Guide for the default IP address and login credentials.
3. Obre a web navegador i introduïu l'adreça IP del commutador.
4. Log in using the provided credentials to access the configuration options.

4.3 Funcionalitat d'alimentació a través d'Ethernet (PoE)

The TL-SG108PE provides power to compatible devices through ports 1-4. The total power budget is 64W, with up to 30W available per port. The switch features:

• Recuperació automàtica PoE: If a PoE-powered device becomes unresponsive, the switch can automatically detect this and reboot the device, restoring functionality.
• Gestió intel·ligent d'energia: Prioritizes power delivery to critical devices and manages the total power budget to prevent overload.
• PD Detection: Automatically detects the required PoE power for your device and protects non-PoE equipment from damage.

Figure 4: Stable operation features including PoE Auto Recovery and Power Management.

5. Manteniment

To ensure optimal performance and longevity of your TL-SG108PE switch, consider the following maintenance guidelines:

• Medi ambient: Operate the switch within its specified temperature and humidity ranges. Avoid placing it in direct sunlight, near heat sources, or in areas with excessive dust or moisture.
• Ventilació: Ensure that the ventilation holes on the sides of the switch are not blocked to allow for proper airflow and heat dissipation.
• Neteja: Netegeu periòdicament l'exterior de l'interruptor amb un drap suau i sec. No utilitzeu netejadors líquids ni en aerosol.
• Actualitzacions de firmware: Consulta l'oficial de TP-Link website periodically for firmware updates. Keeping the firmware updated can improve performance, add new features, and address security vulnerabilities.
• Gestió de cables: Ensure network cables are neatly organized and not excessively bent or strained to prevent signal degradation or damage.

6. Solució De Problemes

If you encounter issues with your TL-SG108PE switch, refer to the following common troubleshooting steps:

• Sense energia: Ensure the power adapter is securely connected to both the switch and a working electrical outlet. Check the Power LED on the switch.
• Sense enllaç/connectivitat: Verify that Ethernet cables are properly connected to both the switch and the network device. Check the link/activity LEDs on the switch ports. Try a different Ethernet cable or port.
• El dispositiu PoE no s'encén: Ensure the PoE device is connected to one of ports 1-4. Check the PoE LED for the respective port. Confirm the PoE device is 802.3af/at compliant and that the total power budget (64W) is not exceeded.
• Velocitat de xarxa lenta: Ensure all connected devices and cables support Gigabit Ethernet for optimal performance. Check for excessive network traffic or potential cable issues.
• No es pot accedir a la interfície de gestió: Verify your computer's IP address is in the same subnet as the switch. Ensure there are no IP address conflicts. Try resetting the switch to factory defaults (refer to the Installation Guide for instructions on using the Reset button).
• Connectivitat intermitent: Check for loose cable connections. Ensure the switch is not overheating. Consider updating the switch firmware.

For more detailed troubleshooting or persistent issues, please contact TP-Link Technical Support.

7. Especificacions

8. Informació de la garantia

The TP-Link TL-SG108PE V3 is backed by a 3 any de garantiaAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

9. Suport tècnic

For technical assistance, product information, or troubleshooting not covered in this manual, please contact TP-Link support:

Figure 5: TP-Link Support Contact Information.

• Telèfon: (866) 225-8139
• Weblloc: els meus productes.tp-link.com/us
• Correu electrònic: suport.USA@tp-link.com