Introducció
The Intermec PB51 is a rugged, 4-inch direct thermal mobile receipt printer designed for demanding field service, route accounting, and point-of-service applications. It offers fast, reliable printing performance to enhance productivity for mobile workers.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PB51 printer.
Figura 1: Frontal view of the Intermec PB51 mobile receipt printer. A receipt is partially ejected from the front slot, displaying "Transaction Receipt", "Transaction #: 4530902261009", "Customer #: 057-806-730", and "Date: 2/26/2009 Time: 12:08:43 PM". The printer features a dark gray casing with a blue button on the left side and the "Intermec PB51" logo on the top panel.
Configuració
1. Desembalatge i inspecció
- Traieu amb cura la impressora i tots els accessoris de l'embalatge.
- Verifiqueu que hi hagi tots els components que figuren a l'albarà d'embalatge.
- Inspect the printer for any visible damage. If damage is found, contact your supplier immediately.
2. Instal·lació i càrrega de la bateria
- Assegureu-vos que la impressora estigui apagada.
- Locate the battery compartment on the printer.
- Insert the battery, ensuring proper alignment with the contacts.
- Tanqueu el compartiment de la bateria de manera segura.
- Connect the AC adapter to the printer and a power outlet. The battery indicator light will show charging status. Allow the battery to fully charge before first use.
3. Càrrega de paper tèrmic
- Obriu la coberta del compartiment de paper.
- Insert the thermal paper roll with the print-side facing the print head.
- Pull a small amount of paper out past the print mechanism.
- Close the paper compartment cover firmly until it latches.
- The printer's paper sensors will detect the paper, minimizing lost transactions.
4. Connectivity Setup (Bluetooth / USB / Serial)
- Bluetooth: Turn on the printer and enable Bluetooth on your host device (e.g., smartphone, tablet, or computer). Cerca available devices and select the PB51. Pair using the default PIN (refer to the printer's display or documentation for the specific PIN).
- USB: Connect the printer to your host device using a standard USB cable. Install the necessary printer drivers on your host device if prompted.
- Sèrie: Connect the printer to your host device using a serial cable. Configure the serial port settings (baud rate, data bits, parity, stop bits) on both the printer and the host device to match.
Instruccions de funcionament
1. Encès / apagat
- Per encendre, manteniu premut el botó d'engegada fins que la pantalla s'il·lumini.
- To power off, press and hold the power button until the display indicates shutdown, then release.
2. Printing a Receipt
- Ensure the printer is powered on and connected to your host device.
- Open the application on your host device that generates receipts or invoices.
- Initiate the print command from your application. The PB51 is designed for 20-30% faster time-to-receipt printing.
- The printer will automatically feed and print the receipt.
- Tear off the receipt along the serrated edge.
3. Ús de la pantalla LCD
The standard LCD display provides important information about the printer's status, battery level, connectivity, and error messages. Use the navigation buttons (if present) to scroll through menu options and settings.
Manteniment
1. Neteja del capçal d'impressió
- Power off the printer and disconnect it from any power source.
- Obriu el compartiment de paper.
- Netegeu suaument la superfície del capçal d'impressió amb un drap sense borrissolampamb alcohol isopropílic.
- Deixeu que el capçal d'impressió s'assequi completament abans de tancar la tapa i engegar la impressora.
- Perform this cleaning regularly, especially if print quality degrades.
2. Cura de la bateria
- Per maximitzar la durada de la bateria, eviteu descarregar-la completament amb freqüència.
- Store the printer and battery in a cool, dry place when not in use for extended periods.
- Use only genuine Intermec replacement batteries.
3. Neteja general
Netegeu l'exterior de la impressora amb un drap suau i secamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquid enters the printer's openings.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La impressora no s'encén | Low or dead battery; faulty power adapter; loose battery connection. | Charge the battery; check power adapter connection; re-seat the battery. |
| Sense sortida d'impressió | No paper; paper loaded incorrectly; connectivity issue; print head dirty. | Load paper correctly; check Bluetooth/USB/Serial connection; clean print head. |
| Poca qualitat d'impressió | Dirty print head; incorrect paper type; low battery. | Clean print head; ensure thermal paper is used; charge battery. |
| Problemes de connectivitat | Incorrect pairing; driver issues; out of range. | Re-pair Bluetooth; reinstall drivers; move closer to host device. |
If the problem persists after attempting these solutions, please contact Intermec customer support.
Especificacions
| Característica | Detall |
|---|---|
| Nom del model | PB51B33004100 |
| Tecnologia d'impressió | Tèrmica directa |
| Sortida de la impressora | Monocrom |
| Mida màxima del suport | 4 polzades |
| Tecnologia de connectivitat | USB, Serial, Bluetooth |
| Pes de l'article | 42 unces (aprox. 2.63 lliures) |
| Dimensions del paquet | 10.2 x 10 x 5 polzades |
| Tipus de controlador | Android (compatible) |
| Fabricant | Intermec |
Garantia i Suport
Specific warranty information for the Intermec PB51 printer is not available in this document. Please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia.
For technical support, service, or to purchase accessories, please contact your authorized Intermec/Honeywell dealer or visit their official support portal.
