Introducció
This manual provides essential information for the assembly, operation, and maintenance of your Tamiya Team Hahn Racing MAN TGS TT-01 Type E 1/10 On-Road Kit. This R/C model assembly kit faithfully recreates the Team Hahn Racing MAN TGS truck, a prominent vehicle in the European truck racing circuit. It features a realistic two-piece polycarbonate body with separately molded plastic parts for mirrors, coupler, and rear bumper. The kit is built upon the proven TT-01 Type-E chassis, which includes dedicated wheels and tires for this model.
The TT-01 Type-E chassis is designed with a low center of gravity, placing the motor and battery close to the ground for optimal balance. It incorporates a fiberglass-reinforced nylon upper deck and gear covers for improved rigidity, and a one-piece tie rod for smoother steering. The 4-wheel double wishbone suspension system and front and rear differential gears all come together to produce excellent operating ability. The model is equipped with 70mm-diameter radial tires paired with metal-plated wheels, designed specifically for this kit, featuring high sidewalls for forgiving turns.
Què hi ha a la caixa
- Tamiya 58632 Team Hahn Racing Man TGS TT01 Type E 1/10 On-Road Kit
- Tamiya TBLE-02S ESC (Electronic Speed Control)
- Marking stickers for the #3 Team Hahn Racing truck livery (2016 season)
- Instruccions de muntatge
Muntatge i muntatge
This product is an assembly kit and requires additional components and tools for completion and operation. Please ensure you have the following items before beginning assembly:
- Battery pack (suitable for RC vehicles)
- Carregador de bateria
- Servo de direcció
- 2-channel Radio system (transmitter and receiver)
- Polycarbonate paint (for body shell)
- Basic modeling tools (e.g., hobby knife, screwdrivers, pliers, scissors)
Follow the detailed assembly instructions provided in the kit. Pay close attention to the steps for chassis construction, motor installation, ESC wiring, and body shell preparation and painting. The TBLE-02S ESC included is capable of running sensor brushless motors (up to 21.5 turn limit) and brushed motors (up to 23 turn limit).

Figura 1: Part frontal view of the assembled Tamiya Team Hahn Racing MAN TGS TT-01 Type E RC truck kit, showcasing the detailed body and sponsor livery.
Instruccions de funcionament
Once assembled and all necessary components are installed, ensure your battery is fully charged and properly connected. Turn on your transmitter first, then the receiver/ESC on the vehicle. Always perform a range check before operating the model at a distance.
Consells de conducció:
- Direcció: The TT-01 Type-E chassis features a one-piece tie rod for smooth steering action. Practice gentle steering inputs to maintain control, especially at higher speeds.
- Acceleració/Frenada: The TBLE-02S ESC provides proportional control for both forward and reverse. Apply throttle smoothly to avoid wheelspin and maintain traction.
- Superfície: This 1/10 On-Road Kit is designed for smooth, paved surfaces. Avoid operating on rough terrain, loose gravel, or wet conditions to prevent damage.
- Llums LED: The model is compatible with separately-sold Tamiya LED light units. Refer to the light unit's instructions for installation and operation.

Figura 2: Part posterior view of the Tamiya Team Hahn Racing MAN TGS TT-01 Type E RC truck kit, highlighting the chassis layout and rear wheel assembly.
Manteniment
Regular maintenance is crucial for the longevity and performance of your RC model. After each use, inspect the vehicle for any loose screws, damaged parts, or debris.
Punts clau de manteniment:
- Neteja: Use a soft brush or compressed air to remove dirt and dust from the chassis, motor, and gears. Avoid using water directly on electronic components.
- Inspecció d'engranatges: Check the spur gear and pinion gear for wear or damage. Ensure proper gear mesh.
- Bearings/Bushings: Lubricate moving parts as recommended in the assembly manual. Consider upgrading to ball bearings for improved efficiency and reduced wear.
- Suspensió: Inspect the double wishbone suspension components for any cracks or bends. Ensure the shocks operate smoothly.
- Pneumàtics: Check tires for wear and tear. The 70mm-diameter radial tires are designed for durability, but replacement may be necessary over time.

Figura 3: Primer pla view of the front wheel and fender, showing the detailed wheel design and tire profile.

Figura 4: Primer pla view of the rear wheel and fender, illustrating the design of the rear section and wheel attachment.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El vehicle no respon als controls. | Low battery in vehicle or transmitter; loose wiring; ESC not calibrated. | Charge batteries; check all connections; recalibrate ESC according to its manual. |
| El motor funciona però les rodes no giren. | Stripped spur gear or pinion gear; loose driveshaft. | Inspect and replace damaged gears; ensure driveshaft is securely connected. |
| Poor steering response. | Loose servo horn; damaged steering linkage; servo malfunction. | Tighten servo horn screw; inspect and replace steering parts; test or replace servo. |
| Vehicle runs slowly or intermittently. | Bateria baixa; sobreescalfament del motor; residus a la transmissió. | Recharge battery; allow motor to cool; clean drivetrain components. |
Especificacions
- Número de model: TAM58632
- Dimensions del producte: 9 x 19.13 x 8.75 polzades
- Pes de l'article: 4.6 lliures
- Tipus de xassís: TT-01 Type-E (Shaft-driven 4WD)
- ESC: Tamiya TBLE-02S (Brushless/Brushed compatible)
- Edat recomanada: 16 anys i més
- Data de llançament: 1 de gener de 2018
- Fabricant: Tamiya
Garantia i Suport
For specific warranty information and technical support, please refer to the documentation included with your product or visit the official Tamiya website. Tamiya products are known for their quality and extensive spare parts availability, ensuring long-term enjoyment of your RC model.
Official Tamiya Weblloc: www.tamiya.com





