1. Introducció
This manual provides essential information for the safe and efficient use of the ABB Indicator Light with Green Diffuser, model 2CSK1313CH. Please read this manual thoroughly before installation and operation to ensure proper functionality and to prevent damage or injury.
2. Informació de seguretat
ADVERTIMENT:
- La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics locals i nacionals.
- Ensure power is disconnected at the main circuit breaker before installation, maintenance, or troubleshooting.
- No feu servir el dispositiu si està danyat.
- This product is designed for specific electrical applications. Do not use it for purposes other than its intended use.
3. Producte acabatview
The ABB Indicator Light with Green Diffuser (Model 2CSK1313CH) is a signaling device designed for various electrical panels and control systems. It provides visual indication of system status, power presence, or operational states.
Figura 3.1: Frontal view of the ABB Indicator Light with Green Diffuser. The image shows a rectangular white module with a prominent circular green light diffuser in the center.
Components inclosos:
- 1 x ABB Indicator Light with Green Diffuser (Model 2CSK1313CH)
4. Configuració i instal·lació
Seguiu aquests passos per a una instal·lació correcta:
- Desconnexió d'alimentació: Before beginning any installation, ensure that the main power supply to the circuit where the indicator light will be installed is completely disconnected. Verify with a voltage provador.
- Muntatge: The indicator light is designed for panel mounting. Insert the device into the designated opening in the control panel. Ensure it is securely fastened according to the panel's specifications.
- Cablejat: Connect the electrical wires to the terminals of the indicator light. Refer to the wiring diagram provided with your specific electrical panel or system for correct polarity and voltage requirements. Ensure all connections are tight and secure.
- Verificació: Double-check all connections to ensure they are correct and secure.
- Restauració d'energia: Un cop finalitzada i verificada la instal·lació, restableix l'alimentació del circuit.
Note: This device does not require batteries for operation.
5. Instruccions de funcionament
The ABB Indicator Light with Green Diffuser operates as a visual signal. Once properly installed and connected to a power source, the green diffuser will illuminate when power is supplied to its terminals, indicating the status it is wired to monitor (e.g., power ON, system active, etc.).
- Funció: Provides a clear visual indication (green light) when activated.
- Activació: The light illuminates when the specified voltage is applied to its input terminals.
- Desactivació: The light turns off when the voltage s’elimina.
6. Manteniment
The ABB Indicator Light is designed for minimal maintenance. Regular inspection is recommended to ensure continued reliable operation.
- Neteja: If the diffuser or housing becomes dirty, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspecció: Periodically check for any signs of physical damage, loose connections, or discoloration. If any issues are observed, disconnect power and address them immediately.
- Lamp Substitució: This unit typically uses an integrated LED or long-life lamp. If the light fails to illuminate, it may indicate a fault with the unit itself or the power supply. Replacement of internal components is generally not user-serviceable.
7. Solució De Problemes
If the indicator light is not functioning as expected, refer to the following common issues and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no il·lumina. | Sense font d'alimentació a la unitat. | Check the circuit breaker and wiring connections. Ensure power is supplied to the correct terminals. |
| La llum parpelleja o és tènue. | Font d'alimentació inestable o connexió fluixa. | Verify power supply stability. Tighten all wiring connections. |
| Physical damage to the unit. | Impacte o manipulació inadequada. | Replace the damaged unit. Do not attempt to repair. |
If the problem persists after attempting these solutions, contact qualified personnel or ABB customer support.
8. Especificacions
| Atribut | Valor |
|---|---|
| Marca | FIG |
| Número de model | 2CSK1313CH |
| Dimensions del producte | 5.1 x 10.6 x 8.6 cm |
| Pes de l'article | 150 grams |
| Color | White (with Green Diffuser) |
| Piles necessàries | No |
| GTIN (EAN) | 8012542006152 |
9. Informació de la garantia
For warranty details, please refer to the official ABB website or contact your local ABB distributor. Keep your purchase receipt as proof of purchase.
10. Atenció al client
For technical assistance, product inquiries, or service, please visit the official ABB website or contact their customer support line. Contact information can typically be found on the ABB corporate weblloc web o a l'embalatge del producte.
This manual is subject to change without notice. The latest version can be found on the manufacturer's weblloc.
