1. Introducció
The Jura Professional Fine Foam Frother Add-On (Item Number 24251, Model 72168) is designed to enhance your Jura coffee machine by producing authentic, fine milk foam for a variety of specialty coffee beverages such as cappuccinos, lattes, and macchiatos. This accessory ensures a consistent and high-quality milk texture.
Imatge 1.1: The Jura Professional Fine Foam Frother Add-On, fully assembled and ready for use. This image displays the main body of the frother with its control dial and the transparent milk spout.
2. Compatibilitat
This frother is compatible with specific Jura Capresso Impressa models. Please verify your machine's model number before installation.
2.1 Models compatibles:
- Jura Capresso Impressa C5
- Jura Capresso Impressa C9
- Jura Capresso Impressa E8 (models 15109/15097)
- Jura Capresso Impressa E9
- Jura Capresso Impressa F7
- Jura Capresso Impressa F8
- Jura Capresso Impressa F9
- Jura Capresso Impressa F50
- Jura Capresso Impressa J5
- Jura Capresso Impressa J6
- Jura Capresso Impressa S7
- Jura Capresso Impressa S8
- Jura Capresso Impressa S9 (non-One-Touch models)
- Jura ENA 3
- Jura ENA 4
- Jura ENA 5
2.2 Incompatible Models:
This frother is no compatible with the following Jura models:
- J6 (15150)
- J9OT (13592)
- Z7 (13549)
- Z9 (13752)
- Z5 (13214)
- Z6 (13299, 15093/15182)
- GIGA W3 (15089)
- GIGA X7 (13624)
- Z8 (15192)
- X8 (15177)
- WE8 (15145)
- S8 (15212/15210)
- E8 (15270/15271)
- E6 (15070)
- D6 (15216/15215)
- GIGA 6 (15274)
- GIGA 5 (15066)
3. Contingut del paquet
En obrir el paquet, assegureu-vos que hi hagi tots els components següents:
- Frothing Assembly (main unit)
- Milk Siphon Tube with Connector
- Spare Ventilator (air intake valve)
- 30g bottle of Cappuccino Cleaner
Imatge 3.1: Un va explotar view showing the individual components of the Jura Professional Fine Foam Frother Add-On, including the main frothing unit, milk siphon tube, and detachable spout.
4. Configuració i instal·lació
Follow these steps to correctly assemble and install your Jura Professional Fine Foam Frother Add-On:
- Attach the Frother: Securely connect the frothing assembly to the designated port on your compatible Jura coffee machine. Ensure it is firmly seated.
- Connect Milk Siphon Tube: Attach one end of the milk siphon tube to the connector on the frother.
- Insert into Milk Container: Place the other end of the milk siphon tube into a container of cold milk. Ensure the tube reaches the bottom of the container for optimal milk intake.
- Secure Milk Spout: Ensure the transparent milk spout is correctly screwed into the frother. It should hold the internal aluminum piece in place. Pushing it in without screwing can lead to milk spray.
Imatge 4.1: The Jura Professional Fine Foam Frother Add-On attached to a Jura coffee machine, actively dispensing frothed milk into a glass. This illustrates the frother in its operational state.
5. Instruccions de funcionament
The frother features a control knob to adjust the milk output.
- Fine Foam (Cappuccino/Latte): To produce fine, frothy milk foam, turn the control knob fully to the left (approximately the 9 o'clock position). This setting is ideal for cappuccinos and lattes.
- Llet calenta: To dispense hot milk with minimal foam, turn the control knob towards the right (approximately the 3 o'clock position). This is suitable for hot chocolates or other milk-based beverages requiring less foam.
Experiment with the knob's position to achieve your desired milk texture and temperature. Always ensure your coffee machine is ready for milk preparation according to its own manual.
6. Manteniment i Neteja
Regular cleaning is essential to maintain hygiene and ensure optimal performance of your frother.
- Neteja diària: After each use, detach the frother from the machine. Disassemble the milk spout and siphon tube. Rinse all components thoroughly under warm running water.
- Neteja profunda: Periodically, use the provided Jura Cappuccino Cleaner. Follow the instructions on the cleaner bottle for proper dilution and cleaning procedure. This helps remove stubborn milk residues.
- Rentat només a mà: All components of the frother are designed for hand washing. Do not place them in a dishwasher, as this can damage the materials.
- Ventilator Maintenance: The small cap at the top (ventilator/air intake valve) is crucial for foam production. Ensure it is clean and free from blockages. A spare ventilator is included for replacement if needed.
- Remuntatge: Ensure all parts are completely dry before reassembling. Pay attention to correctly screwing the milk spout to secure the internal aluminum piece.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No foam or poor foam quality |
|
|
| Milk sprays or leaks |
|
|
| Frother detaches during use |
|
|
8. Especificacions
- Marca: Jura
- Número de model: 24251 (Número de model de l'article: 72168)
- Característica especial: Escuma de llet
- Color: Acer inoxidable (components)
- Material: Various (including plastic and stainless steel)
- Usos recomanats: Cappuccino, Latte, Milk Foam
- Components inclosos: Frothing assembly, milk siphon tube, spare ventilator, Cappuccino Cleaner
- Instruccions de cura del producte: Rentat només a mà
- Capacitat: Designed for use with external milk containers
- Estil: Modern
- Nombre de configuracions: 2 (Fine Foam, Hot Milk)
- Font d'alimentació: Utilizes power from the connected coffee machine
- Pes de l'article: Aproximadament 9.5 unces
- Any de fabricació: 2018 (as per product data)
- UPC: 794151411159
9. Garantia i Suport
For information regarding warranty coverage, technical support, or to purchase replacement parts, please contact Jura customer service directly or visit their official weblloc.
