Manual d'usuari del controlador de reg interior Hunter X-Core XC601i-e de 6 estacions

Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hunter X-Core XC601i-e 6-Station Indoor Irrigation Controller. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance of your irrigation system.

Producte acabatview

The Hunter X-Core XC601i-e is an indoor irrigation controller designed to manage up to 6 irrigation stations. It features three independent programs (A, B, C) with multiple start times, allowing for flexible scheduling of watering cycles. The intuitive dial and button interface simplify programming and manual operation.

Figura 1: Front panel of the Hunter X-Core XC601i-e controller. It displays a digital screen at the top, control buttons (+, -, arrow keys, PRG) above the main dial, and a large central dial with various settings: System Off, Manual, Solar Sync, Seasonal Adjust, Date/Time, Start Times, Run Times, and Water Days. The Hunter logo is visible at the bottom.

Configuració

1. Muntatge del controlador

1. Choose a suitable indoor location near a standard electrical outlet, protected from direct sunlight and extreme temperatures.
2. Use the provided mounting template or mark the two mounting holes on the wall.
3. Install two screws into the wall, leaving approximately 3mm of the screw head exposed.
4. Hang the controller on the screws using the keyhole slots on the back.

2. Cablejat del controlador

Precaució de seguretat: Ensure the power supply is disconnected before performing any wiring.

• Connexió d'alimentació: Connect the two wires from the external transformer to the two terminals labeled "24 VAC" on the controller's terminal strip.
• Valve Wiring:
  1. Connect one wire from each solenoid valve to a separate station terminal (1-6).
  2. Connect the common wire from all solenoid valves to the terminal labeled "COM".
• Master Valve/Pump Start (Optional): If using a master valve or pump start relay, connect one wire to the terminal labeled "MV" and the other to the "COM" terminal.
• Sensor Wiring (Optional): If using a rain sensor or other weather sensor, connect the sensor wires to the two terminals labeled "SEN". Ensure the sensor bypass switch is set correctly.

3. Initial Power-Up and Basic Settings

1. Connect the transformer to a power outlet. The display should illuminate.
2. Establir data/hora:
   • Gireu el dial cap a Data/Hora posició.
   • Utilitza el + or - buttons to adjust the year, month, day, and time.
   • Utilitza el > button to move between settings.

Instruccions de funcionament

The X-Core controller uses a central dial for navigation and dedicated buttons for adjustments.

Posicions del dial de control:

• Sistema apagat: Turns off all automatic and manual watering.
• manual: Permet l'operació manual d'estacions o programes individuals.
• Data/Hora: S'utilitza per configurar la data i l'hora actuals.
• Horaris d'inici: Used to set the start times for programs A, B, and C.
• Temps d'execució: Used to set the watering duration for each station within programs A, B, and C.
• Dies d'aigua: Used to select specific watering days or intervals for programs A, B, and C.
• Ajust estacional: Adjusts all program run times by a percentage (e.g., 100% for normal, 50% for half).
• Sincronització solar: (If equipped and enabled) Automatically adjusts watering based on local weather conditions.

Programming Automatic Watering:

The X-Core has three independent programs: A, B, and C. Each program can have up to four start times.

1. Seleccioneu el programa: Premeu el botó PRG button to cycle through programs A, B, and C.
2. Estableix els horaris d'inici:
   • Gireu el dial a Les hores d'inici.
   • Ús + or - to set the desired start time.
   • Premeu PRG or > to move to the next start time (up to four per program).
3. Temps d'execució definits:
   • Gireu el dial a Temps d'execució.
   • The display will show the program and station number. Use + or - to set the watering duration (in minutes) for each station.
   • Ús > to advance to the next station.
4. Establir dies d'aigua:
   • Gireu el dial a Jornades d'aigua.
   • Select watering days (e.g., Monday, Wednesday, Friday) or an interval (e.g., every 2 days) using the + or - botons.
   • El > button can be used to cycle through day options.
5. Return to RUN: After programming, turn the dial to the CÓRRER position for automatic operation.

Funcionament manual:

1. Gireu el dial a Manual.
2. Utilitza el > button to select the desired station or program.
3. Ús + or - to set the manual run time.
4. The selected station or program will begin watering immediately.
5. To stop manual watering, turn the dial to Sistema desactivat or CÓRRER.

Manteniment

Substitució de la bateria:

The X-Core controller uses one AAA battery to maintain the time and program settings during power outages. It is recommended to replace the battery annually.

1. Locate the battery compartment on the back or side of the controller.
2. Open the compartment and remove the old AAA battery.
3. Insert a new AAA battery, ensuring correct polarity.
4. Tanqueu el compartiment de la bateria.

Note: The controller requires AC power for valve operation. The battery only preserves settings.

Atenció general:

• Keep the controller clean and free from dust. Use a soft, dry cloth for cleaning.
• Ensure the controller is not exposed to moisture or extreme temperatures, as it is designed for indoor use.

Resolució de problemes

Especificacions

• Model: XC601i-e
• Estacions: 6
• Programes: 3 independent programs (A, B, C)
• Horaris d'inici: Up to 4 per program
• Entrada d'alimentació: 230 VAC, 50/60 Hz (via external transformer)
• Potència de sortida: 24 VCA, 1.0 A
• Bateria: 1 x AAA (for time and program backup)
• Dimensions (aprox.): 25.5 x 18.5 x 8 cm (Package dimensions, actual unit may vary slightly)
• Pes (aprox.): 3 kg (Package weight, actual unit may vary slightly)
• Només per a ús interior