Producte acabatview
The Absima 2030041 is a high-quality, double-sided 25-tooth servo horn designed for various remote control (RC) applications. Constructed from robust aluminum, this accessory ensures durability and reliable performance for your RC models.
Característiques principals:
- Robust Aluminum construction
- Compatible with Absima, Savöx, Futaba, Bluebird, ThunderTiger, and Spektrum servo brands
- 25-tooth spline for secure fit
- Double-sided version for versatile linkage options
- Longitud: 49 mm
- Metallic Grey color
Advertències de seguretat
WARNING: This product contains small parts and is not suitable for children under 3 years of age due to choking hazards.
Always ensure proper installation and secure all fasteners to prevent injury or damage to your model. Use appropriate tools and follow all instructions carefully.
Configuració i instal·lació
This section guides you through the process of installing the Absima 2030041 servo horn onto your compatible servo.
- Prepare Your Servo: Ensure your RC servo is securely mounted in your model and is powered off. Identify the servo's output shaft, which should have a 25-tooth spline.
- Align the Servo Horn: Carefully align the 25-tooth spline of the Absima 2030041 servo horn with the output shaft of your servo. The horn should slide on smoothly. Do not force it.
- Secure the Horn: Use the provided screw (or the screw that came with your servo) to secure the servo horn to the servo's output shaft. Tighten the screw firmly but do not overtighten, as this can strip the threads or damage the servo.
- Attach Linkages: Connect your steering or throttle linkages to the desired holes on the double-sided servo horn. Ensure the linkages move freely without binding.
- Funcionalitat de prova: Power on your RC system and test the servo's movement. Ensure the servo horn moves through its full range of motion without obstruction and that the linkages operate correctly.
Figure 1: The Absima 2030041 servo horn shown with included mounting screws. This image displays the metallic grey finish and the double-sided design of the horn, along with the various mounting points for linkages.
Pautes de funcionament
Once installed, the Absima 2030041 servo horn operates as an integral part of your RC model's control system. Its primary function is to translate the rotational movement of the servo shaft into linear motion for steering, throttle, or other functions.
- Compatibilitat: Ensure your servo is compatible with a 25-tooth spline. This servo horn is specifically designed for 25T servos from brands like Absima, Savöx, Futaba, Bluebird, ThunderTiger, and Spektrum.
- Linkage Setup: Adjust your linkages to achieve the desired throw and trim settings for your specific RC model. Refer to your model's instruction manual for optimal linkage geometry.
- Comprovacions periòdiques: Before each use, visually inspect the servo horn and its connections to ensure everything is secure and free from damage.
Figura 2: Primer pla view of the Absima 2030041 servo horn, highlighting the "25" marking indicating its 25-tooth spline compatibility. This view also shows the precision machining of the aluminum.
Manteniment
Proper maintenance will extend the lifespan of your Absima 2030041 servo horn and ensure consistent performance.
- Neteja: Periodically clean the servo horn to remove dirt, dust, and debris. A soft brush or compressed air can be used. Avoid harsh chemicals that may damage the aluminum finish.
- Inspecció: Regularly inspect the servo horn for any signs of wear, cracks, or bending. Check the mounting holes and the spline for any deformation.
- Comprovació de fixació: Ensure all screws securing the servo horn and linkages are tight. Loose fasteners can lead to play in the steering/throttle and potential damage.
- Emmagatzematge: When not in use, store the servo horn and your RC model in a clean, dry environment away from extreme temperatures.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Servo horn feels loose on servo shaft. | Mounting screw is loose or spline is worn. | Tighten the mounting screw. If spline is worn, replace the servo horn or servo. |
| Linkages bind or do not move freely. | Incorrect linkage length or geometry; debris. | Adjust linkage length. Clean any obstructions. Ensure servo horn is not bent. |
| Servo horn does not fit servo shaft. | Incompatible servo spline (e.g., 23T or 24T instead of 25T). | Verify your servo has a 25-tooth spline. This horn is specifically for 25T servos. |
Especificacions
- Número de model: 2030041
- Material: Alumini
- Recompte de splines: 25 dents
- Versió: Doble cara
- Longitud: 49 mm
- Color: Gris metàl·lic
- Compatibilitat: Absima, Savöx, Futaba, Bluebird, ThunderTiger, Spektrum (25T servos)
- Dimensions del paquet: 13.6 x 7 x 0.7 cm
- Pes de l'article: 1 grams
- Edat recomanada pel fabricant: 14 anys i més
Garantia i Suport
For specific warranty information regarding your Absima 2030041 servo horn, please refer to the documentation provided with your purchase or visit the official Absima weblloc web. Els termes de la garantia poden variar segons la regió i el distribuïdor.
If you encounter any issues or require technical assistance, please contact Absima customer support or your authorized dealer. Keep your proof of purchase handy for any warranty claims.
Absima Official Weblloc: www.absima.com (Nota: Això és un marcador de posició URL, please refer to the actual official weblloc de suport.)
