1. Producte acabatview
The Mircom Technologies MRM-700 is a Series 700 Surface Mount Backbox, designed for use with compatible fire safety equipment. This red backbox provides a secure and accessible enclosure for various fire alarm system components, ensuring proper installation and protection.
Figura 1: Packaging of the Mircom Technologies MRM-700 Surface Mount Backbox. The box is white with the product name and model number clearly visible.
2. Configuració i instal·lació
This section provides general guidelines for setting up and installing the MRM-700 backbox. Always refer to local building codes and the specific installation instructions for the device being housed within the backbox.
2.1. Eines necessàries
- Tornavís (tipus adequat per a cargols de muntatge)
- Drill (if mounting to a wall)
- Cinta mètrica
- Nivell
- Llapis o retolador
2.2. Instruccions de muntatge
- Seleccioneu la ubicació: Choose a suitable surface for mounting, ensuring it is flat, stable, and free from obstructions. Consider accessibility for future maintenance.
- Marqueu els punts de muntatge: Use the backbox as a template to mark the desired mounting screw locations on the surface. Ensure the marks are level.
- Perforar forats pilot (si cal): If mounting to a wall or hard surface, drill pilot holes at the marked locations. Use appropriate drill bit size for your screws and wall anchors.
- Secure Backbox: Align the backbox with the pilot holes (or marks) and secure it firmly using appropriate screws. Do not overtighten.
- Instal·la el dispositiu: Once the backbox is securely mounted, proceed with installing the intended fire safety device (e.g., pull station, horn/strobe) inside the backbox according to its specific instructions.
3. Principis de funcionament
The MRM-700 is a passive component designed to house and protect active fire safety devices. It does not have operational controls itself. Its function is to provide a secure, surface-mounted enclosure for devices such as manual pull stations, notification appliances, or other compatible fire alarm system components.
Operation of the overall fire safety system will depend on the specific device installed within this backbox. Refer to the instruction manual of the device housed within the MRM-700 for its operational details.
4. Manteniment
The MRM-700 backbox requires minimal maintenance. Regular inspection is recommended to ensure its integrity and proper function as an enclosure.
4.1. Neteja
- Wipe the exterior of the backbox with a soft, damp tela.
- No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar l'acabat.
- Ensure no moisture enters the interior of the backbox, especially if an electrical device is housed within.
4.2. Inspecció
- Periodically check for any signs of physical damage, such as cracks, dents, or loose mounting.
- Ensure all mounting screws are secure.
- Verify that the device housed within the backbox is still properly seated and protected.
5. Solució De Problemes
As a passive enclosure, the MRM-700 backbox itself typically does not experience "malfunctions." Troubleshooting primarily involves addressing issues related to its physical integrity or installation.
| Problema | Causa possible | Solució |
|---|---|---|
| Backbox is loose on mounting surface | Mounting screws are loose or insufficient. | Tighten existing screws. If necessary, use larger screws or appropriate wall anchors. |
| Visible damage (cracks, dents) | Impacte físic o estrès. | Inspect the extent of damage. If structural integrity is compromised, replace the backbox. |
| Device inside backbox is not secure | Improper installation of the device within the backbox. | Refer to the installation instructions for the specific device and ensure it is correctly mounted within the MRM-700. |
6. Especificacions
- Model: MRM-700
- Número de peça: MMRM700
- Descripció: Series 700 Surface Mount Backbox
- Color: Vermell
- Fabricant: MIRCOM
- Quantitat de paquet d'articles: 1
- ASIN: B01E9GKMEY
- Data de primera disponibilitat: 22 de setembre de 2022
7. Informació de la garantia
Mircom Technologies products are typically covered by a limited warranty. For specific warranty terms and conditions applicable to the MRM-700, please refer to the official Mircom Technologies weblloc web o poseu-vos en contacte amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
8. Atenció al client
For technical assistance, product inquiries, or support regarding the Mircom Technologies MRM-700, please contact Mircom Technologies directly.
Fabricant: MIRCOM
Please visit the official Mircom Technologies website for the most current contact information, including phone numbers, email addresses, and support resources.
