Introducció
This manual provides essential information for the proper use, installation, and maintenance of LAB Universal Replacement Pins. These pins are designed for precision applications, specifically for locksmithing and rekeying processes, ensuring accurate pin stack heights with .003 inch increments.
Please read this manual thoroughly before using the product to ensure safe and effective operation.
Producte acabatview
Figure 1: LAB Universal Replacement Pins. These are precision-machined brass pins, typically used in lock cylinders to achieve specific pin stack heights for rekeying or repair.
The LAB Universal Replacement Pins are critical components for locksmiths and security professionals. They are manufactured with precise .003 inch increments, allowing for fine adjustments in pin stack height to match specific key bitting requirements. The "Bottom Crown Pin" designation indicates a specific type of pin used at the bottom of the pin stack, often featuring a rounded or crowned top for smooth key insertion and operation.
Muntatge i preparació
Proper setup is crucial for accurate and reliable lock rekeying or repair.
- Preparació de l'espai de treball: Ensure a clean, well-lit, and organized workspace. Small components like pins can be easily lost.
- Eines: Gather all necessary locksmithing tools, including a pinning kit, follower, plug holder, tweezers, and a micrometer or caliper for verification.
- Identificació del PIN: Carefully identify the correct pin sizes required for the specific lock cylinder and key combination. The .003 inch increments allow for precise matching.
- Precaucions de seguretat: Wear appropriate eye protection to prevent injury from small flying parts.
Instruccions de funcionament
These pins are used in the process of rekeying or repairing pin tumbler lock cylinders. The following steps outline a general procedure; specific lock types may require variations.
- Desmuntatge: Carefully disassemble the lock cylinder, removing the plug from the housing. Ensure all existing pins and springs are removed and accounted for.
- Inserció de clau: Insert the new or target key into the lock plug.
- Bottom Pin Installation: Place the appropriate LAB Universal Replacement Bottom Crown Pins into the pin chambers of the plug, ensuring the crowned end faces outwards (towards the key bitting). The pin should sit flush with the shear line when the key is inserted.
- Driver Pin and Spring Installation: Install the corresponding driver pins and springs into the housing chambers above the bottom pins.
- Remuntatge: Carefully reinsert the plug into the cylinder housing, ensuring the shear line aligns correctly.
- Prova de funció: Test the lock with the new key to ensure smooth operation and proper locking/unlocking.
Nota: Precision is paramount. Use a micrometer to verify pin lengths if necessary to achieve optimal shear line alignment.
Manteniment
LAB Universal Replacement Pins are durable components, but proper handling and storage are essential for their longevity and accuracy.
- Emmagatzematge: Store pins in a dedicated pinning kit or organized container to prevent mixing of sizes and loss. Keep them in a dry environment to prevent corrosion.
- Neteja: If pins become dirty, clean them with a soft, lint-free cloth. Avoid abrasive cleaners.
- Inspecció: Periodically inspect pins for any signs of wear, deformation, or corrosion. Worn pins can affect lock functionality.
Resolució de problemes
If you encounter issues after installing replacement pins, consider the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Key does not turn smoothly or binds. | Incorrect pin length; debris in pin chambers; misaligned plug. | Verify pin lengths with a micrometer; clean chambers thoroughly; ensure plug is correctly seated. |
| Lock does not operate with the correct key. | Incorrect pin sizes installed; pins are stuck. | Double-check pin sizes against the key bitting; ensure pins move freely within chambers. |
| Pins fall out during reassembly. | Improper use of follower tool; plug not held securely. | Use a follower tool correctly to retain pins and springs; ensure the plug is held firmly during insertion. |
Especificacions
- Tipus de producte: Universal Replacement Pins
- Increment: .003 polzades
- Tipus de pin: Bottom Crown Pin
- Material: Brass (typical for locksmithing pins)
- Model/Size: .294 (specific length/size as indicated in product title)
- Marca: LAB
- Fabricant: LAB SECURITY
- UPC: 084015003164
- ASIN: B01EZ6N8GC
Informació de la garantia
LAB products are manufactured to high standards. For specific warranty details regarding these replacement pins, please refer to the original product packaging or contact LAB Security directly. General warranties typically cover manufacturing defects under normal use conditions.
Atenció al client
For technical assistance, product inquiries, or to report issues, please contact LAB Security customer support. Contact information can usually be found on the manufacturer's official weblloc o embalatge del producte.
Exempció de responsabilitat: This manual is intended for informational purposes only. Professional locksmithing knowledge and tools are recommended for the installation and use of these pins.
