1. Introducció
This user manual provides comprehensive instructions for the safe and efficient operation of the Showtec Compact Par 7 Q4 7 x 3W RGBW LED Floor PAR Spot. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper use and to prevent damage to the unit or injury to personnel.
The Showtec Compact Par 7 Q4 is a compact RGBW PAR can designed for various lighting applications, offering versatile color mixing and robust performance.
2. Instruccions de seguretat
Observeu sempre les següents precaucions de seguretat per reduir el risc de descàrrega elèctrica, incendi o lesions:
- Assegureu-vos que la font d'alimentació voltage coincideix amb el voltage especificat a la unitat.
- Connecteu sempre la unitat a una presa de corrent amb connexió a terra.
- No feu funcionar la unitat si el cable d'alimentació està danyat.
- Disconnect from mains power before cleaning or servicing.
- No exposeu la unitat a la pluja o la humitat.
- Mantingueu una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
- Eviteu l'exposició directa dels ulls a la font de llum.
- Aquesta unitat només és per a ús interior.
3. Producte acabatview
The Showtec Compact Par 7 Q4 features seven 3W RGBW LEDs, providing a wide spectrum of colors. Its compact design makes it suitable for floor standing or truss mounting.
Figura 3.1: Frontal view of the Showtec Compact Par 7 Q4 with red light output, showcasing its seven powerful RGBW LEDs.
Figure 3.2: The PAR spot emitting a bright white light, demonstrating its full spectrum capabilities.
Figure 3.3: The PAR spot displaying a vibrant blue light, highlighting its color mixing versatility.
Figura 3.4: Primer pla view of the LED array when the unit is off, showing the individual lenses.
Figura 3.5: posterior view of the unit, showing the power input and DMX connections (XLR 3-pin).
Figura 3.6: Angle view of the PAR spot, demonstrating the adjustable mounting bracket for floor or truss applications.
4. Configuració
4.1 Desembalatge
Carefully unpack the unit and check for any damage during transit. Retain the packaging material for future transport or storage.
4.2 Muntatge
The Compact Par 7 Q4 can be used as a floor spot or mounted to a truss using the integrated bracket. Ensure the mounting surface or truss can support the weight of the fixture. Use appropriate clampi cables de seguretat quan es munta per sobre del cap.
4.3 Connexió d'alimentació
Connect the power cable to the unit's power input and then to a grounded electrical outlet. Verify that the local voltage coincideix amb els requisits de la unitat (240 volts).
Connexió DMX 4.4 (opcional)
For DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the fixture. If connecting multiple units, daisy-chain them by connecting the DMX OUT of the first unit to the DMX IN of the next.
5. Funcionament
5.1 Tauler de control
The unit features a digital display and control buttons (Menu, Up, Down, Enter) on the rear for setting modes and DMX addresses.
5.2 Modes de funcionament
The Showtec Compact Par 7 Q4 typically offers several operating modes:
- Mode DMX: Allows control via an external DMX controller. Set the DMX address using the control panel.
- Mode automàtic: Espectacles de llums preprogramats que funcionen automàticament.
- Mode actiu de so: The light reacts to sound via a built-in microphone.
- Mode mestre/esclau: Link multiple units where one acts as the master and others as slaves, synchronizing their operation.
- Mode de color estàtic: Select and display a single static color.
5.3 Gràfic de canals DMX
Refer to the specific DMX channel chart in the full product manual for detailed information on controlling each function via DMX. Common channels include Dimmer, Red, Green, Blue, White, Strobe, and Program selection.
6. Manteniment
6.1 Neteja
Regular cleaning of the lenses and housing is recommended to maintain optimal light output and extend the unit's lifespan. Use a soft, lint-free cloth and a mild glass cleaner. Do not use abrasive materials.
6.2 Canvi de fusibles
If the unit does not power on, check the fuse located near the power input. Replace it with a fuse of the same type and rating only.
6.3 Emmagatzematge
When not in use, store the unit in its original packaging or a suitable flight case in a dry, dust-free environment.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La unitat no s'encén | No power supply; Blown fuse; Damaged power cable | Check power connection; Replace fuse; Replace cable |
| Sense control DMX | Incorrect DMX address; Faulty DMX cable; DMX controller issue | Verify DMX address; Check/replace DMX cable; Test controller |
| Lights flicker or behave erratically | Poor DMX signal; Overheating; Internal fault | Check DMX connections; Ensure proper ventilation; Contact support |
| Els colors són incorrectes | Incorrect DMX channel values; Internal calibration issue | Adjust DMX values; Perform factory reset if available; Contact support |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | Showtec |
| Model | Q4 |
| Número de referència | LIG0013729-000 |
| Font de llum | 7 LED RGBW de 3 W |
| Poder | 3 Watts (per LED) |
| Voltage | 240 Volts |
| Font d'alimentació | Cable elèctric |
| Dimensions (L x A x A) | 31.5 x 31 x 15.5 cm |
| Pes | 2.73 quilos |
| ASIN | B01F04U758 |
9. Garantia i Suport
Information regarding specific warranty terms and conditions for the Showtec Compact Par 7 Q4 is not available in the provided product details. Please refer to the retailer or manufacturer's official weblloc per obtenir la informació de garantia més actualitzada.
For technical support, service, or spare parts inquiries, please contact your authorized Showtec dealer or the manufacturer directly. Always provide the model number (Q4) and reference number (LIG0013729-000) when seeking support.
