Introducció
The Yale T1L Key-Free Touchscreen Deadbolt provides a secure and convenient keyless entry solution for your home. This manual offers detailed instructions for the proper installation, daily operation, routine maintenance, and troubleshooting of your new deadbolt. Please read these instructions thoroughly before beginning installation or operation to ensure correct setup and optimal performance.
Imatge: Davant view of the Yale T1L Key-Free Touchscreen Deadbolt, showcasing the illuminated keypad.
Configuració i instal·lació
The Yale T1L deadbolt is designed to replace most standard deadbolts. Ensure your door meets the following specifications for proper installation:
- Gruix de la porta: 1-3/4 inches to 2-1/4 inches.
- Part posterior: Adjustable for 2-3/8 inches or 2-3/4 inches.
- Diàmetre creuat: 2-1/8 inches minimum diameter.
Components inclosos:
- Yale T1L Lock Assembly (Exterior Keypad and Interior Module)
- Pestillo de cèrcol
- Strike Plate and Mounting Hardware
- 4 piles AA
- Manual d'instal·lació (aquest document)
- Plantilla de porta
For detailed, step-by-step visual and audio instructions, it is recommended to use the free BILT app, which guides you through the installation process.
Imatge: Diagram illustrating door preparation and compatibility for deadbolt installation, showing required hole sizes and door thickness.
Imatge: Interior view of the Yale T1L deadbolt, showing the battery compartment and thumb turn.
Instruccions de funcionament
Obrint la Porta
- Activa el teclat numèric: Touch the touchscreen with three fingers or the palm of your hand to illuminate the keypad.
- Introdueix el codi: Input your valid 4-8 digit entry code.
- Confirmeu: Press the checkmark (✓) symbol.
The deadbolt will retract, and the door can be opened.
Tancant la porta
- Bloqueig d'un sol toc: Press any key on the keypad for 3 seconds, or press the checkmark (✓) symbol.
- Rebloqueig automàtic: If enabled, the deadbolt will automatically extend after a set period (default is 30 seconds) once the door is closed. This feature can be configured in the lock's menu settings.
Gestió de codis d'entrada
The lock supports up to 25 unique entry codes. Refer to the full programming guide for instructions on adding, modifying, or deleting user codes.
Imatge: En angle view of the Yale T1L Key-Free Touchscreen Deadbolt, highlighting the numerical keypad and function buttons.
Manteniment
Canvi de bateria
The Yale T1L deadbolt requires 4 AA alkaline batteries. When the batteries are low, the lock will provide an audible and visual low battery warning. To replace:
- Traieu la coberta interior de la bateria.
- Substituïu les quatre piles AA per piles alcalines noves.
- Substituïu la tapa de la bateria.
Important: No barregeu piles velles i noves, o diferents tipus de piles.
Còpia de seguretat de bateria d'emergència
If the batteries completely drain, you can power the lock temporarily using a standard 9V battery. Touch the 9V battery to the two terminals located at the bottom of the exterior keypad. While holding the 9V battery in place, enter your entry code to unlock the door.
Neteja
Clean the touchscreen and lock exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents, as these can damage the finish and electronic components. The lock features a rubber gasket to protect your door's finish during installation and use.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El bloqueig no respon a les entrades del teclat. | Bateries esgotades. | Replace all 4 AA batteries. Use a 9V battery for emergency power. |
| Keypad does not illuminate. | Keypad not activated. | Touch the touchscreen with three fingers or the palm of your hand to activate. |
| Entry code is not working. | Incorrect code entered; code not programmed; lock in programming mode. | Verify the code. Re-program the code if necessary. Ensure the lock is not in programming mode. |
| El forrellat no s'estén ni es retreu completament. | Misalignment during installation; obstruction in door frame. | Check door and frame alignment. Ensure the deadbolt latch operates smoothly without resistance. Re-check installation steps. |
| Lock is unusually loud during operation. | Minor friction or misalignment. | While some motor noise is normal, excessive noise may indicate slight misalignment. Ensure all screws are tightened correctly and the deadbolt moves freely. |
Especificacions
- Nom del model: Yale T1L Lock Touchscreen Deadbolt (YRD120)
- Número de peça: YRD120NR0BP
- Marca: Yale
- Tipus de bloqueig: Teclat Deadbolt
- Característica especial: Touchscreen, Key-Free Operation
- Material: Acer inoxidable
- Color: Bronze
- Dimensions (L x A x A): 5.5 x 5.5 x 9.13 polzades
- Pes de l'article: 3.61 lliures
- Font d'alimentació: Battery powered (4 AA batteries, included)
- Tipus de pila de bateria: Alcalí
- Protocol de connectivitat: Z-Wave (if Z-Wave module is installed)
- Tipus de controlador: Android, Hand Control, Mechanical knob (refers to potential integration, primary control is keypad)
- BHMA Grade: Grade 2 Certified Deadbolt
Informació de la garantia
The Yale T1L Key-Free Touchscreen Deadbolt is backed by a lifetime limited warranty on the finish and mechanical components. Electronic components are covered by a one-year warranty. For full warranty terms and conditions, please refer to the official Yale product documentation or contact Yale customer support.
Suport
Should you require further assistance with installation, operation, or troubleshooting, please consult the Yale website for additional resources, FAQs, and contact information for customer support.
