1. Introducció
The Turtle Beach Stealth 350VR gaming headset is engineered to deliver clear, amplified Virtual Reality audio. It features a battery-powered design, Variable Bass Boost, and an ergonomic structure specifically tailored for VR use, providing ample clearance for VR headbands and cables. Equipped with large 50mm speakers, it offers a rich and expansive audio experience. The lightweight build and comfortable fabric-wrapped memory foam ear cushions ensure extended comfort during use. A removable noise-cancelling microphone guarantees crystal-clear communication, complemented by Mic Monitoring, which allows users to hear their own voice to prevent shouting. Convenient on-board audio controls are easily accessible directly on the headset.
Figura 1: Frontal view of the Turtle Beach Stealth 350VR Headset.
2. Configuració
2.1 Connexió del micròfon
To connect the noise-cancelling microphone, firmly insert it into the dedicated jack located on the left ear cup of the headset. Ensure a solid connection for optimal chat clarity.
Figure 2: Close-up of the left ear cup showing the microphone jack.
2.2 Engegada/apagada
Locate the power switch on the left ear cup. Slide the switch upwards to power on the headset. A blue LED indicator will illuminate, confirming the headset is active. To power off, slide the switch downwards.
2.3 Càrrega dels auriculars
The Stealth 350VR features an internal rechargeable battery, providing up to 30 hours of amplified VR audio. To charge, connect the included USB charging cable to the charging port on the headset and a compatible USB power source.
2.4 Connecting to a VR Device (e.g., PlayStation VR)
Ensure your VR device (e.g., PSVR) is fully set up and powered on. Connect the Stealth 350VR to the VR device using the included short audio cable. The right-angle connector side of the audio cable should be connected to the VR device's inline port. After connecting, power on your Stealth 350VR headset. Adjust the VR device's volume to maximum, then use the headset's controls for your preferred volume level.
For PlayStation 4 setup: Go to Configuració > Dispositius > Dispositius d'àudio. setembre Dispositiu d'entrada i sortida to the headset connected to the controller. Set Sortida als auriculars a Tot àudio. setembre Control de volum (auriculars) to maximum. Select Ajusteu el nivell del micròfon and follow on-screen instructions to calibrate.
Video 1: Detailed setup and feature overview for the Turtle Beach Stealth 350VR headset, including connection to VR devices.
3. Funcionament dels auriculars
All primary audio controls are conveniently located on the left ear cup of the headset.
3.1 Mic Mute
To mute or unmute the microphone, slide the dedicated switch on the face of the left ear cup left or right.
3.2 Volum mestre
Adjust the master volume dial to control the overall audio output level of your Stealth 350VR headset.
3.3 Variable Bass Boost
Use the Variable Bass Boost slider to increase or decrease the bass levels, enhancing immersion in your VR experience.
Vídeo 2: Ràpidview of the Turtle Beach Stealth 350VR headset features and controls.
4. Manteniment
To ensure the longevity and optimal performance of your Turtle Beach Stealth 350VR headset, follow these maintenance guidelines:
- Neteja: Feu servir un drap suau i sec per netejar els auriculars i la diadema. Eviteu utilitzar productes químics agressius o materials abrasius.
- Emmagatzematge: Guardeu els auriculars en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Cura del cable: Handle all cables with care. Avoid sharp bends or excessive pulling, which can damage internal wiring.
- Micròfon: When not in use, the detachable microphone can be removed and stored separately to prevent damage.
5. Solució De Problemes
If you encounter issues with your Stealth 350VR headset, consider the following common solutions:
- Sense àudio/Volum baix:
- Assegureu-vos que els auriculars estiguin encesos i completament carregats.
- Comproveu totes les connexions del cable per assegurar-vos que estiguin segures.
- Verify that the master volume dial on the headset is turned up.
- Confirm that the audio output settings on your VR device or console are correctly configured (refer to Section 2.4 for PS4 settings).
- El micròfon no funciona:
- Ensure the microphone is firmly inserted into its jack.
- Check that the mic mute switch on the headset is in the unmute position.
- Verify microphone input settings on your VR device or console.
- Àudio distorsionat:
- Lower the master volume on the headset or your connected device.
- Adjust the Variable Bass Boost to see if it resolves the distortion.
- Assegureu-vos que no hi hagi altres dispositius d'àudio que interfereixin.
6. Especificacions
| Característica | Detall |
|---|---|
| Altaveus | 50mm Speakers with Neodymium Magnets |
| Resposta de freqüència | 20 Hz - 20 kHz |
| Ear-cup Design | Over-Ear (Closed) |
| Microphone Design | Unidirectional Noise-Cancelling Gaming Microphone |
| Conector d'auriculars | 3.5 mm Jack |
| Tecnologia de connectivitat | Amb cable |
| Tipus de control | Volume Control, Mic Mute, Bass Boost |
| Característica del cable | Detachable Audio Cables |
| Pes de l'article | 1.1 lliures (aprox. 0.5 kg) |
| Durada de la bateria | Fins a 30 hores |
| Dispositius compatibles | PlayStation VR, PlayStation 4, Oculus Rift, HTC Vive, Gear VR, PC, Xbox (via controller) |
7. Garantia i Suport
For warranty information, technical support, and additional resources, please visit the official Turtle Beach weblloc web o poseu-vos en contacte amb el servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.
Assistència en línia: www.turtlebeach.com/support
