Keeley Bubble Tron Dynamic Flanger Phaser Instruction Manual

1. Producte acabatview

The Keeley Bubble Tron Dynamic Flanger Phaser and Random Synth Filter is a versatile effects pedal designed to produce unique modulation sounds. Inspired by classic dynamic flangers and phasers, this pedal offers three distinct modes of operation: Dynamic Flange, Dynamic Phase, and Random Filter. It allows for expressive control over your guitar's signal, reacting to your pick attack and playing dynamics to create a range of sonic textures.

Figure 1: Keeley Bubble Tron Dynamic Flanger Phaser Pedal.

The pedal features a simple yet powerful control layout, allowing users to dial in subtle or extreme effects. Its dynamic response makes it an intuitive tool for guitarists seeking to add expressive modulation to their sound.

2. Configuració

To set up your Keeley Bubble Tron pedal, follow these steps:

1. Connexió d'alimentació: Connect a standard 9V DC power supply (center negative, 65mA+ current draw) to the 9V jack on the pedal. Ensure the power supply meets these specifications to prevent damage.
2. Connexió d'entrada: Connecteu la guitarra o un altre instrument a la presa "INPUT" del costat dret del pedal amb un cable d'instrument estàndard de 1/4 de polzada.
3. Connexió de sortida: Connecteu el connector "OUTPUT" del costat esquerre del pedal al vostre amplificador o el següent pedal de la cadena de senyals utilitzant un cable d'instrument estàndard de 1/4 de polzada.
4. Configuració inicial: Before engaging the pedal, set all knobs to their 12 o'clock position and ensure the mode switch is in the middle (Phase) position for a neutral starting point.

3. Instruccions de funcionament

The Keeley Bubble Tron offers a variety of controls to shape your sound. Familiarize yourself with each knob and switch:

Controls:

• RATE (FDBK):
  • In Filter & Phase modes: Controls the rate of the LFO.
  • In Flange mode: Controls feedback. Turning left provides maximum negative feedback; turning right provides maximum positive feedback.
• SENS (sensibilitat):
  • In Filter mode: Controls envelope sensitivity, acting like a synth filter.
  • In Phase & Flange modes: Controls input sensitivity, determining the point at which dynamic control is triggered. Start with this knob at full left and adjust for desired responsiveness.
• DEPTH (Shape):
  • In Filter mode: Selects LFO shape (from full left: ramp amunt, ramp down, random, or triangle).
  • In Phase & Flange modes: Sets the depth of the effect for mild or lush sounds.
• NIVELL: Controla el nivell de sortida general de l'efecte.
• INTERRUPTOR DE PEUT: Toggles the effect on and off.

Mode Select Switch:

• AMUNT: Activates Filter mode.
• MITJÀ: Activates Phase mode.
• BAIX: Activates Flange mode.

Figure 2: Bank A (Default Mode) Control Layout. This mode is active when the internal switch is set to Bank A.

Internal Mini Toggles (Bank Selection):

The Bubble Tron features internal mini toggles to expand its sonic capabilities. To access these, you will need to remove the back plate of the pedal.

• ANALOG FILTER (Vintage/Modern):
  • Vintage Mode: Rolls off some high frequencies for a warmer tone.
  • Modern Mode: Provides full-range clarity (default setting).
• BANK TOGGLE (Bank 1/Bank 2):
  • Bank 1 (Default): Offers Sample & Hold Filter, Dynamic Phaser, and Dynamic Flanger modes.
  • Banc 2: Offers Envelope Filter, Standard 8-Stage Phaser, and Standard Classic Flanger modes.

Figure 3: Bank B Control Layout. Access this mode by switching the internal Bank Toggle from Bank A to Bank B.

Figure 4: Internal Mini Toggles for Analog Filter and Bank Selection.

Figure 5: External Toggle Switch modes for Bank 1 and Bank 2.

4. Manteniment

To ensure the longevity and optimal performance of your Keeley Bubble Tron, observe the following maintenance guidelines:

• Neteja: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, as these can damage the finish.
• Emmagatzematge: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, disconnect the power supply.
• Font d'alimentació: Always use a regulated 9V DC power supply with a center-negative polarity and sufficient current (65mA+). Incorrect power supplies can cause damage and void the warranty.
• Connexions: Ensure all cables are securely connected. Avoid excessive force when plugging or unplugging cables.

5. Solució De Problemes

If you encounter issues with your Keeley Bubble Tron, try these troubleshooting steps:

• Sense so:
  • Comproveu totes les connexions dels cables (entrada, sortida, alimentació).
  • Verify the power supply is correctly connected and providing the specified 9V DC.
  • Assegureu-vos del vostre instrument i ampel lifier funcionen correctament.
  • Bypass the pedal to confirm the issue is with the pedal itself.
• Soroll/bruix no desitjat:
  • Feu servir una font d'alimentació aïllada i d'alta qualitat.
  • Comproveu si hi ha cables defectuosos.
  • Assegureu-vos de connectar a terra correctament el vostre amplificador i altres equips.
• Effect Not Engaging/Responding:
  • Check the footswitch functionality.
  • Adjust the SENS (Sensitivity) knob, especially in dynamic modes, to ensure it's set appropriately for your playing style and instrument output.
  • Verify the MODE SELECT switch is in the desired position.

6. Especificacions

7. Garantia i Suport

For warranty information and technical support, please refer to the official Keeley Electronics weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

Oficial Weblloc: Keeley Electronics Store