Projector NEC NP15LP Lamp Manual de substitució

1. Introducció

This manual provides essential instructions for the safe and effective replacement of the NEC NP15LP projector lamp assembly. The NP15LP is an original equipment manufacturer (OEM) bulb designed to meet the specific performance requirements of compatible NEC projectors, ensuring optimal brightness and picture quality.

Models de projectors compatibles: NEC M230X, M260W, M260X, M260XS, M271W, M271X, M300X, M300XG, M311X.

Figure 1: The NEC NP15LP projector lamp assembly, featuring the bulb housed within its protective casing. This image displays the front view de la lamp, highlighting the optical component and mounting structure.

2. Instruccions de seguretat

Adhere to the following safety precautions to prevent injury or damage to the projector and lamp:

• Always power off the projector and unplug it from the electrical outlet before attempting any maintenance or lamp substitució.
• Allow the projector to cool down completely (at least 30 minutes) after use before handling the lamp. Hot lamps can cause severe burns.
• Do not touch the glass surface of the new lamp bulb directly with bare hands. Oils from your skin can reduce lamp life. Use gloves or a clean cloth if necessary.
• Manejar la lamp assembly with care. It contains a fragile glass bulb that can break if dropped or mishandled.
• Never operate the projector with the lamp coberta retirada.
• Eliminar l'antiga lamp according to local environmental regulations. Projector lamps contain mercury and should not be discarded with regular household waste.

3. Installation (Lamp Replacement)

Follow these steps to replace the projector lamp:

1. Prepareu el projector: Ensure the projector is powered off and unplugged. Allow it to cool down for at least 30 minutes.
2. Localitza Lamp Compartiment: Refer to your projector's specific user manual to locate the lamp compartment cover. This is typically on the side or bottom of the projector.
3. Eliminar Lamp Portada: Unscrew the screw(s) securing the lamp cover and carefully remove the cover.
4. Elimina la L antigaamp: Loosen the screw(s) holding the lamp assembly in place. Carefully grasp the handle or designated area on the old lamp assembly and gently pull it straight out of the projector. Avoid forcing it.


Figura 2: lateral view of the NP15LP lamp assembly, showing the electrical connectors. These connectors must align correctly when inserting the new lamp al projector.

5. Insereix una nova Lamp: Carefully insert the new NP15LP lamp assembly into the projector, ensuring it slides smoothly into position. Do not force it. Make sure the connectors align properly.
6. Secure New Lamp: Tighten the screw(s) to secure the new lamp assembly firmly in place.
7. Substitueix Lamp Portada: Torneu a connectar la lamp compartment cover and secure it with its screw(s).
8. Power On and Reset Lamp Temporitzador: Plug the projector back into the electrical outlet and power it on. It is crucial to reset the lamp timer in the projector's menu system. Refer to your projector's user manual for specific instructions on how to reset the lamp timer. Failure to reset the timer may result in inaccurate lamp life readings or premature lamp avisos.

4. Funcionament

Once correctly installed and the lamp timer reset, the NP15LP lamp will function automatically as part of your NEC projector. The lamp provides the light source necessary for image projection. Its performance is optimized for the compatible NEC M-series projectors.

El lamp's lifespan is monitored by the projector's internal timer. Regular monitoring of the lamp timer and adherence to replacement guidelines will ensure consistent image quality and prevent unexpected lamp failure during use.

5. Manteniment

Proper maintenance extends the life of your projector and ensures optimal lamp rendiment:

• Filtres d'aire nets: Regularly clean or replace the projector's air filters as recommended in your projector's manual. Clogged filters can lead to overheating, which significantly reduces lamp vida.
• Allow Proper Cooling: Always allow the projector to complete its cooling cycle after shutdown before unplugging it or moving it. This helps to cool the lamp i components interns.
• Avoid Rapid Power Cycles: Frequent on/off cycles can stress the lamp and shorten its lifespan.
• Condicions ambientals: Operate the projector in a well-ventilated area with stable temperature and humidity to prevent overheating.

6. Solució De Problemes

If you encounter issues after lamp replacement, consider the following:

• Lamp No s'encén:
  • Assegureu-vos que lamp assembly is fully seated and secured with its screw(s).
  • Comproveu la lamp compartment cover is correctly installed and secured.
  • Check that the projector is properly plugged in and receiving power.
• Lamp Warning Indicator Still On:
  • Confirmeu que la lamp timer has been reset in the projector's menu. This is a common oversight.
  • If the warning persists, consult your projector's user manual for specific error codes or indicators.
• Qualitat d'imatge tènue o deficient:
  • Assegureu-vos que la lent del projector estigui neta.
  • Check projector display settings (brightness, contrast).
  • Verify that the new lamp is an authentic NP15LP OEM bulb.

7. Especificacions

8. Informació de la garantia

Specific warranty terms for the NEC NP15LP replacement lamp assembly are typically provided by the seller at the time of purchase. Please retain your proof of purchase and contact the vendor or manufacturer directly for detailed warranty coverage and claims procedures.

9. Atenció al client

For further assistance, technical support, or inquiries regarding the NEC NP15LP projector lamp, please contact your original point of purchase or refer to the official NEC support channels for your specific projector model.

You may find additional resources and contact information on the official NEC weblloc: www.necdisplay.com/support