1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Soundstream XP-6964 Full Range 6x9 Inch 4-Way Speakers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and optimal performance of your speakers.
2. Informació de seguretat
- Always disconnect the vehicle's battery before beginning any electrical installation to prevent short circuits.
- Ensure all wiring is properly insulated to prevent electrical shorts and damage to your vehicle's electrical system or the speakers.
- Mount speakers securely to prevent them from becoming loose during vehicle operation, which could cause injury or damage.
- No exposeu els altaveus a una humitat excessiva ni a temperatures extremes.
- Use appropriate tools for installation. If unsure, consult a professional installer.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- Soundstream XP-6964 6x9 Inch 4-Way Speakers (2 units)
- Tarantula Grilles (2 units)
- Cargols de muntatge
4. Configuració i instal·lació
4.1 Muntatge dels altaveus
The Soundstream XP-6964 speakers are designed for flush mounting. Ensure the mounting location has sufficient depth and clearance. The required mounting depth is approximately 3.00 inches (7.62 cm).
Image: Soundstream XP-6964 speaker with indicated dimensions. The speaker measures approximately 22.86 cm in length, 15.24 cm in width, and 10.16 cm in depth.
- Carefully mark the mounting holes using the speaker frame or grille as a template.
- Cut the opening for the speaker if necessary, ensuring it matches the speaker's dimensions.
- Col·loqueu l'altaveu a l'obertura.
- Fixeu l'altaveu amb els cargols de muntatge proporcionats. No l'estrengueu massa.
- Attach the Tarantula grilles over the speakers for protection and aesthetic finish.
Image: Soundstream XP-6964 speaker with the protective Tarantula grille installed.
4.2 Connexions de cablejat
The XP-6964 speakers have an impedance of 4 Ohms. Ensure your amplifier or head unit is compatible with this impedance. Connect the speaker wires to the quick disconnect terminals on the speaker, observing correct polarity (positive to positive, negative to negative).
Imatge: Part posterior view of the Soundstream XP-6964 speaker, highlighting the quick disconnect wiring terminals for connection to an ampmés viu.
- Identify the positive (+) and negative (-) terminals on both the speaker and your ampunitat principal/llicadora.
- Connect the positive wire from the amplifier to the positive terminal on the speaker.
- Connect the negative wire from the amplifier to the negative terminal on the speaker.
- Assegureu-vos que totes les connexions siguin segures i que no tinguin curtcircuits.
5. Instruccions de funcionament
Once properly installed and wired, your Soundstream XP-6964 speakers will reproduce audio from your connected source. Adjust the volume and audio settings on your head unit or amplifier to achieve your desired sound. Avoid operating the speakers at excessively high volumes for prolonged periods to prevent damage.
6. Manteniment
The Soundstream XP-6964 speakers require minimal maintenance.
- Neteja: Use a soft, dry cloth to wipe down the speaker grilles and frames. Do not use harsh chemicals or abrasive cleaners.
- Inspecció: Reviseu periòdicament les connexions del cablejat per assegurar-vos que es mantinguin segures.
- Protecció: Keep the speakers free from dust, debris, and direct exposure to liquids.
7. Solució De Problemes
Si teniu problemes amb els altaveus, consulteu els passos habituals següents per a la resolució de problemes:
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so dels altaveus | Incorrect wiring, loose connections, amplifier off/faulty, head unit settings. | Check all wiring connections for correct polarity and security. Ensure amplifier is powered on and functioning. Verify head unit audio settings. |
| So distorsionat o de mala qualitat | Overpowering speakers, incorrect gain settings, damaged speaker, poor source quality. | Baixa el volum. Ajusta amplifier gain settings. Check speaker for physical damage. Test with a different audio source. |
| So intermitent | Loose wiring, faulty cable. | Inspect all wiring for loose connections or frayed cables. Replace faulty cables if necessary. |
8. Especificacions
The following specifications apply to the Soundstream XP-6964 speakers:
Image: Product box displaying key specifications for the Soundstream XP-6964 speakers.
- Model: XP-6964
- Tipus d'altaveu: 6"x9" 4-Way Full Range Speaker
- Maneig de potència màxima: 380 watts
- Gestió de la potència RMS: 200 watts
- Impedància: 4 ohms
- Material del con: Injection Molded Polypropylene (PP) Cone
- Bobina de veu: 1" Aluminum Voice Coil
- Gamma mitjana: 2" Balanced Cone Midrange
- Tweeters: 1" Balanced Dome Tweeter, 0.75" Balanced Super Tweeter
- Eficiència del sistema: 90.9 dB
- Profunditat de muntatge: 3.00 polzades (7.62 cm)
- Components inclosos: Speakers, Tarantula Grilles, Mounting Screws
- Material: Polypropylene, Aluminum
- UPC: 0709483051973
9. Garantia i Suport
Soundstream products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Soundstream weblloc web. Per a consultes sobre assistència tècnica o servei, poseu-vos en contacte amb el servei d'atenció al client de Soundstream a través dels seus canals oficials.
