Southco M1-42-8 Push-to-Close Latch User Manual

Producte acabatview

The Southco M1-42-8 Push-to-Close Latch is a medium-sized, key-locking latch designed for secure closure with a flush-mount appearance. It features a recessed handle and concealed mounting hardware for a clean aesthetic. Constructed from 316 Stainless Steel with an electropolished finish, this latch offers excellent corrosion resistance, making it suitable for both indoor and outdoor applications. Its push-to-close mechanism provides convenient and reliable functionality.

Figura 1: Southco M1-42-8 Push-to-Close Latch. This image shows the front view of the electropolished stainless steel latch with its key-locking mechanism and recessed handle.

Configuració i instal·lació

Proper installation is crucial for the optimal performance and longevity of the Southco M1-42-8 latch. This latch is designed for door thicknesses between 7mm (.275 in) and 12mm (.475 in).

Eines necessàries

Trepant
Appropriate drill bits for mounting holes
Cinta mètrica o regle
Marking tool (pencil/marker)
Screwdriver (if applicable for mounting screws)

Passos d'instal·lació

Preparació de la superfície de muntatge: Ensure the mounting surface on the door or panel is clean, flat, and within the specified thickness range of 7mm to 12mm.
Marcar les ubicacions dels forats: Carefully measure and mark the precise locations for the latch cutout and mounting screw holes according to the product's technical drawing (not provided in this manual, refer to manufacturer's specifications).
Obertura de tall: Using appropriate tools, create the necessary cutout for the latch body. Ensure the cutout is clean and accurately sized to allow the latch to sit flush.
Instal·leu el tancament: Insert the latch into the prepared opening. The recessed handle should be facing outwards.
Pestell segur: Fasten the latch using the appropriate mounting hardware (not specified if included, typically sold separately or integrated). Ensure it is securely tightened to prevent movement.
Install Striker (if separate): If a separate striker plate is required for the door frame, align it with the latch mechanism and secure it. Test the latch engagement to ensure smooth operation.

Instruccions de funcionament

The Southco M1-42-8 latch features a simple push-to-close operation and key-locking functionality.

Closing the Latch

To close the door or panel, simply push it firmly until the latch mechanism engages with the striker. A distinct click indicates that the latch is securely closed.

Opening the Latch

To open, press the recessed handle. The latch will disengage, allowing the door or panel to be opened.

Bloqueig i desbloqueig

Insert the key into the keyhole located on the latch face.
Turn the key clockwise to lock the latch. This will prevent the handle from being pressed and the latch from opening.
Turn the key counter-clockwise to unlock the latch. The handle will then be operable.
Remove the key after locking or unlocking.

Manteniment

The Southco M1-42-8 latch is constructed from durable 316 Stainless Steel and is designed for long-term performance with minimal maintenance. However, periodic care can extend its lifespan and maintain its appearance.

Neteja: Clean the exterior surfaces with a soft cloth and mild soap and water solution. For stubborn dirt or grime, a non-abrasive stainless steel cleaner can be used. Avoid harsh chemicals or abrasive materials that could damage the electropolished finish.
Lubricació: Periodically, apply a small amount of silicone-based lubricant to the moving parts of the latch mechanism, particularly the internal components and the key cylinder, to ensure smooth operation. Avoid oil-based lubricants that can attract dirt.
Inspecció: Regularly inspect the latch for any signs of wear, damage, or loose mounting hardware. Ensure the key mechanism operates smoothly. Address any issues promptly to prevent further damage.
Prevenció de la corrosió: While 316 Stainless Steel is highly corrosion-resistant, in harsh marine or industrial environments, occasional rinsing with fresh water can help remove salt or chemical residues that could lead to surface discoloration over time.

Resolució de problemes

This section provides solutions to common issues that may arise with the Southco M1-42-8 latch.

Problema	Causa possible	Solució
Latch is stiff or difficult to operate.	Lack of lubrication; accumulation of dirt/debris; minor misalignment.	Clean the latch mechanism and apply silicone-based lubricant. Check for any obstructions. Verify alignment with the striker.
Latch does not engage or close securely.	Misalignment with striker; worn striker or latch components; obstruction.	Inspect the alignment of the latch and striker. Adjust striker position if possible. Check for foreign objects preventing full engagement. If components are worn, replacement may be necessary.
La clau és difícil de girar o treure.	Dirt in key cylinder; worn key; internal mechanism issue.	Apply a small amount of graphite powder or silicone spray into the key cylinder. Try a spare key if available. If the issue persists, the key cylinder may need professional attention or replacement.
Surface discoloration or rust spots.	Exposure to harsh chemicals or prolonged moisture; surface contamination.	Clean with a stainless steel cleaner and soft cloth. For minor rust, a non-abrasive rust remover for stainless steel can be used, followed by thorough rinsing. Ensure proper ventilation in the environment.

Especificacions

Detailed technical specifications for the Southco M1-42-8 Push-to-Close Latch.

Model: M1-42-8
Tipus: Push-to-Close Latch
Mecanisme de bloqueig: Bloqueig de claus
Size Series: Talla Mitjana
Material: Acer inoxidable 316
Acabat: Electropolit
Interval de gruix de la porta: 7mm - 12mm (0.275 in - 0.475 in)
Grip Range: 25mm - 26mm (1.00 in)
Profile: Pro baixfile
Fabricant: Southco
ASIN: B01HSFT5E6
Dimensions aproximades del paquet: 8 x 6 x 3 polzades
Pes aproximat del paquet: 0.01 unces

Garantia i Suport

For information regarding product warranty, technical support, or to purchase replacement parts, please contact Southco directly or refer to their official weblloc.

Fabricant: Southco

Si us plau, visiteu www.southco.com for the most up-to-date contact information and support resources.

	Loquets Southco Série M1 à Fermeture par Poussée : Spécifications et Guide de Sélection Especificacions tècniques detallades, dimensions, materials i guia de selecció per als loquets Southco sèrie M1 amb tancament per poussée, incloent models en acer inoxidable i plàstic, amb diverses opcions de verrouillage i cues.
	NY DZUS Q-Latch Quarter-Turn Fasteners - Southco Technical specifications and part selection guide for Southco's NY DZUS Q-Latch quarter-turn fasteners, detailing grip ranges, finishes, and installation notes.
	Taula de talles i guia de mesures dels anells ARAIYA by Aza Troba la talla perfecta per a l'anell que t'està agradant amb la taula de talles oficial d'ARAIYA by Aza. Aprèn a mesurar la talla del teu anell a casa utilitzant un anell existent o un cordó, amb conversions de talles detallades i consells d'experts.
	Dongguan Hujiang Hardware Co., Ltd. - Catàleg de productes edició 2025 Exploreu el complet catàleg de productes del 2025 de Dongguan Hujiang Hardware Co., Ltd., que inclou una àmplia gamma d'elements de fixació d'alta qualitat, com ara cargols, perns, femelles i volanderes. Els detalls inclouen les especificacions del material, els graus (per exemple, 4.8, 8.8, 10.9, 12.9) i el compliment de normes internacionals com ara DIN, GB i ISO. Cerqueu dades tècniques sobre la resistència a la tracció, les dimensions i les especificacions de les rosques.
	Nominal Printable Ring Size Guide A guide from Nominal to help you accurately measure your ring size at home using a printable chart and a credit card for reference.
	Guia de talles d'anells Pandora Una guia completa per trobar la talla perfecta del teu anell Pandora, amb instruccions per mesurar els anells existents i utilitzar el mesurador d'anells proporcionat.

Southco M1-42-8