Pyle PTVSTNDPT3215 Portable TV Tripod Stand

1. Introducció

Thank you for choosing the Pyle PTVSTNDPT3215 Portable TV Tripod Stand. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new TV stand. Please read these instructions thoroughly before use and retain them for future reference.

Figure 1: Pyle PTVSTNDPT3215 Portable TV Tripod Stand

2. Informació de seguretat

Observeu les següents precaucions de seguretat per evitar lesions o danys al producte:

• Capacitat de pes: Do not exceed the maximum weight load capacity of 88.8 lliures (40.3 kg).
• Mida del televisor: This stand is designed for TVs up to 32 polzades. Using larger TVs may compromise stability.
• Estabilitat: Ensure the tripod legs are fully extended and locked into position on a flat, stable surface before mounting any equipment.
• Muntatge: Follow all assembly instructions carefully. Improper assembly can lead to instability and potential injury.
• Nens i animals de companyia: Mantingueu els nens i les mascotes allunyats del suport durant el muntatge i el funcionament.
• Moviment: Do not move the stand with a TV mounted on it unless absolutely necessary. If moving, ensure the TV is securely fastened and move slowly and carefully.
• Inspecció: Inspeccioneu regularment el suport per detectar qualsevol signe de desgast, danys o components solts. No l'utilitzeu si està danyat.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar el muntatge. Si falta alguna peça o hi ha alguna peça danyada, poseu-vos en contacte amb el servei d'atenció al client.

• Tripod Base Assembly
• Telescopic Center Pole
• Placa de muntatge VESA
• Mounting Hardware (screws, washers, spacers for TV attachment)
• Manual d'instruccions (aquest document)

Figura 2: Components inclosos

4. Instruccions de configuració

Follow these steps to assemble your Pyle PTVSTNDPT3215 TV Tripod Stand.

4.1. Assemble the Tripod Base

1. Place the tripod base on a flat, stable surface.
2. Extend the three legs outwards until they are fully spread and the locking mechanism engages. Ensure the anti-slip rubber feet are firmly on the ground.
3. Insert the telescopic center pole into the top of the tripod base. Secure it by tightening the knob on the tripod base.

Figure 3: Tripod Base with Anti-Slip Footing

4.2. Attach the VESA Mounting Plate

1. Attach the VESA mounting plate to the top of the telescopic center pole. Align the holes and secure it with the provided screws and nuts.
2. Ensure the plate is firmly attached and does not wobble.

4.3. Muntar el televisor

Before mounting, identify the VESA mounting pattern on the back of your TV. This stand supports VESA patterns including 75x75mm, 100x100mm, 100x200mm, 200x200mm, and 220x220mm.

1. Carefully align the VESA mounting holes on the back of your TV with the holes on the mounting plate.
2. Using the appropriate screws, washers, and spacers from the provided hardware kit, securely fasten your TV to the mounting plate. Do not overtighten.
3. Proveu suaument l'estabilitat del televisor muntat abans de deixar-lo anar.asinho fa completament.

Figure 4: TV Compatibility and VESA Mount

5. Instruccions de funcionament

This section details how to adjust and use your TV tripod stand.

5.1. Ajust d'alçada

1. Loosen the height adjustment knob on the telescopic center pole.
2. Carefully raise or lower the pole to your desired viewing height, within the range of 32.3 polzades a 59.8 polzades.
3. Once the desired height is reached, firmly tighten the adjustment knob to lock the pole in place.

Figure 5: Height Adjustment with Locking Mechanism

5.2. Ajust de la inclinació

1. The VESA mounting plate allows for tilt adjustment. Loosen the tilt adjustment screws on the side of the mounting plate.
2. Adjust the TV to the desired tilt angle, ranging from -5 a + graus 25.
3. Firmly tighten the tilt adjustment screws to secure the TV in position.

Figure 6: Tilt Adjustment for Optimal Viewing

5.3. Folding for Storage/Transport

1. Remove the TV from the mounting plate.
2. Loosen the height adjustment knob and fully retract the telescopic pole.
3. Release the locking mechanism on the tripod legs and fold them inwards.
4. The stand can now be stored or transported in its compact, folded state.

6. Manteniment

To ensure the longevity and proper function of your TV tripod stand, follow these maintenance guidelines:

• Neteja: Wipe the stand with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Inspecció: Periodically check all screws, bolts, and knobs to ensure they are tight. Re-tighten if necessary.
• Emmagatzematge: When not in use, store the stand in a dry, cool place, away from direct sunlight and extreme temperatures.

7. Solució De Problemes

If you encounter issues with your Pyle PTVSTNDPT3215, refer to the following common problems and solutions:

8. Especificacions

9. Garantia i Suport

Pyle products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Pyle website. If you require technical assistance or have questions regarding your PTVSTNDPT3215 stand, please contact Pyle customer support through their official channels.

Assistència en línia: www.pyleusa.com