RYOBI 1.2 Amp Manual d'instruccions de la serra de calar amb cable de 16 polzades

1. Informació important de seguretat

Always observe basic safety precautions when using this scroll saw to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before operation.

• Protecció ocular: Always wear ANSI Z87.1 compliant eye protection with side shields.
• Àrea de treball: Mantingueu la vostra zona de treball neta i ben il·luminada. Les zones desordenades o fosques conviden a accidents.
• Seguretat elèctrica: Do not expose power tools to rain or wet conditions. Avoid body contact with grounded surfaces.
• Seguretat personal: Stay alert, watch what you are doing, and use common sense. Do not operate while tired or under the influence of drugs or alcohol.
• Peça de treball segura: Fixeu sempre fermament la peça de treball abans de tallar.
• Protector de fulla: Ensure all guards are in place and functioning correctly before operation.
• Desconnecteu quan no estigui en ús: Disconnect the saw from the power source before making adjustments, changing accessories, or storing.

2. Muntatge i muntatge

Before operating your RYOBI 16 in. Scroll Saw, ensure it is properly set up and all components are securely installed.

2.1 Desembalatge i contingut

Carefully remove the scroll saw and all accessories from the packaging. Verify that all included components are present:

• RYOBI 16 in. Scroll Saw unit
• One (1) 18 TPI blade
• Clau hexagonal
• Tecla de canvi

Figura 1: Mésview of the RYOBI 16 in. Scroll Saw. This image displays the complete scroll saw unit, highlighting its main components including the table, blade assembly, and motor housing.

2.2 Instal·lació de la fulla

This scroll saw features tool-free blade changes, accommodating both plain and pin-end blades.

1. Assegureu-vos que la serra estigui desendollada de la font d'alimentació.
2. Locate the blade tensioning/release mechanism, typically at the top arm of the saw.
3. Release the blade tension.
4. Carefully insert the new blade, ensuring the teeth are pointing downwards towards the table.
5. Secure the blade in both the upper and lower blade clamps.
6. Re-apply blade tension until the blade is taut but not overly stressed.

Figura 2: Primer pla view of the scroll saw blade and the hold-down foot. This image illustrates the blade's position and the mechanism that secures the workpiece during cutting.

Figura 3: Detallada view of the blade tensioning and release mechanism. This shows how to adjust or change the blade on the scroll saw.

2.3 Table Tilt Adjustment

The cast aluminum table can tilt from 0-45 degrees for angled cuts.

1. Afloixeu el botó de bloqueig de la taula que es troba sota la taula.
2. Ajusteu la taula a l'angle desitjat utilitzant l'escala d'angles.
3. Tighten the table locking knob securely before operation.

Figure 4: Close-up of the table tilt mechanism with angle markings. This image demonstrates how to set the table to a specific angle for bevel cuts.

2.4 Dust Blower Setup

The integrated dust blower helps keep the cutting line clear of debris for improved visibility.

• Ensure the dust blower nozzle is positioned correctly to direct air towards the cutting line.
• For optimal dust collection, connect a shop vacuum to the dust port located on the side of the saw.

3. Instruccions de funcionament

Familiarize yourself with the controls and proper operating procedures before making any cuts.

3.1 Engegada/Apagada i Control de Velocitat

The scroll saw is equipped with an ON/OFF switch and a variable speed control dial.

1. Plug the saw into a standard 120V AC outlet.
2. Insert the switch key into the power switch.
3. Press the ON switch to start the saw.
4. Adjust the cutting speed using the variable speed control dial to match the material and desired cut.
5. To turn off, press the OFF switch. For safety, remove the switch key when not in use.

Figure 5: Close-up of the power switch and variable speed control dial. This image shows the controls for starting, stopping, and adjusting the saw's speed.

3.2 Tècniques de tall

The 16-inch throat depth allows for maximum cutting capacity, ideal for intricate designs in wood.

• Talls rectes: Guide the workpiece steadily along the cutting line.
• Talls corbats: Slowly rotate the workpiece as you feed it into the blade, allowing the blade to follow the curve.
• Internal Cuts: Drill a pilot hole in the workpiece, then thread the blade through the hole before securing it in the clamps.
• Material: This saw is optimized for wood. Ensure the material is properly supported and secured.

Figure 6: A user operating the RYOBI scroll saw to cut a piece of wood. This demonstrates the saw in action, highlighting proper hand placement and workpiece handling.

4. Manteniment

Regular maintenance ensures optimal performance and extends the life of your scroll saw.

• Neteja: After each use, unplug the saw and use a brush or compressed air to remove sawdust and debris from the table, blade area, and motor vents. The integrated dust blower helps keep the cut-line clear during operation, but manual cleaning is still necessary.
• Substitució de la fulla: Replace dull or damaged blades promptly. Refer to Section 2.2 for tool-free blade change instructions.
• Lubricació: Periodically apply a small amount of light machine oil to moving parts as indicated in the detailed product manual (not provided here).
• Inspecció: Regularly inspect the power cord for damage, and check all fasteners for tightness.

5. Solució De Problemes

This section addresses common issues you might encounter with your scroll saw.

5.1 La serra no arrenca

• Check if the power cord is securely plugged into a live outlet.
• Ensure the switch key is fully inserted into the power switch.
• Verifiqueu que l'interruptor automàtic no s'hagi disparat.

5.2 Blade Breaks Frequently

• Check blade tension; it might be too tight or too loose.
• Ensure the correct blade type is used for the material being cut.
• Avoid forcing the workpiece into the blade; let the blade cut at its own pace.

5.3 Vibració excessiva

• Ensure the saw is placed on a stable, level surface.
• Check that all mounting bolts (if applicable) are tight.
• Inspeccioneu la fulla per detectar danys o una instal·lació incorrecta.

6. Especificacions

7. Informació de la garantia

El RYOBI 1.2 Amp Corded 16 in. Scroll Saw (Model SC165VS) comes with a 3 anys de garantia. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the official RYOBI weblloc.

8. Atenció al client

For technical assistance, replacement parts, or further inquiries regarding your RYOBI scroll saw, please contact RYOBI customer service. Contact information can typically be found on the product packaging or the official RYOBI weblloc.