Manual d'instruccions de la serra de taula i de bisell Metabo KGT 305 M

1. Introducció

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Metabo KGT 305 M Table and Miter Saw. This versatile power tool is designed for precise cutting tasks, offering both miter saw and table saw functionalities. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

2. Instruccions de seguretat

Always observe general power tool safety guidelines and the specific warnings provided in this section. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Llegeix totes les instruccions: Familiaritzeu-vos amb els controls i l'ús correcte de la serra.
• Utilitzeu l'equip de protecció individual (EPI) adequat: Porteu sempre ulleres de seguretat, protecció auditiva i una màscara antipols.
• Garantir una zona de treball segura: Keep the work area clean, well-lit, and free from obstructions. Do not operate in explosive atmospheres.
• Assegureu la peça de treball: Always use the material clamp to securely fasten the workpiece before cutting.
• Eviteu l'arrencada accidental: Ensure the switch is in the off position before plugging in the tool. The saw features restart protection to prevent accidental startup after a power interruption.
• Mantenir un peu i un equilibri adequats: No sobrepasseu.
• Keep guards in place: Never operate the saw without all guards properly installed and functioning.
• Desconnecteu l'alimentació: Always unplug the saw before making any adjustments, changing accessories, or performing maintenance.
• Seguretat làser: This product contains a Class 2 laser. Avoid direct eye exposure to the laser beam.

3. Components i controls

Familiarize yourself with the various parts of your Metabo KGT 305 M saw before operation.

Components clau:

• Capçal de serra: Contains the motor, saw blade, and blade guard. It can be tilted for bevel cuts.
• Fulla de serra: Carbide-tipped blade (56 teeth) for efficient cutting.
• Taula: The main work surface, convertible between miter saw and table saw modes.
• Extensions de taula: Continuously extendable for supporting long workpieces.
• Angle Adjustment Lever/Knob: For setting precise miter and bevel angles.
• Guia làser: Projects a line onto the workpiece for accurate cutting.
• Llum de treball LED: Il·lumina la zona de tall.
• Material Clamp: Secures the workpiece from above or the front.
• Parada paral·lela: Used in table saw mode for consistent rip cuts.
• Cut Stop: For precise length cuts.
• Bossa de recollida de pols: Recull serradures durant el funcionament.
• Interruptor d'encesa/apagada: Control de l'alimentació principal.

4. Configuració

4.1 Desembalatge i inspecció

Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during transit. Ensure all listed components are present:

• Metabo KGT 305 M Saw
• Carbide Saw Blade (56 teeth)
• 2 Integrated Table Extensions
• Parada paral·lela
• Cut Stop
• Material Clamp
• Chip Collection Bag
• Tool for Saw Blade Change

4.2 Saw Blade Installation

1. Desconnecteu l'alimentació: Assegureu-vos que la serra estigui desendollada de la font d'alimentació.
2. Raise the saw head: Lift the saw head to its highest position.
3. Open the blade guard: Follow the instructions in the tool for safely opening the blade guard.
4. Use the blade change tool: Utilize the provided tool to loosen the arbor nut while holding the arbor lock button.
5. Install the blade: Place the new carbide saw blade (56 teeth) onto the arbor, ensuring the teeth are oriented correctly for cutting (usually pointing downwards at the front of the saw).
6. Assegureu la fulla: Tighten the arbor nut firmly with the blade change tool.
7. Close the blade guard: Ensure the guard is securely closed and functions correctly.

4.3 Col·locació d'accessoris

• Extensions de taula: Slide the integrated table extensions out to the desired length to support longer workpieces. They can be removed if not needed.
• Parada paral·lela: Attach the parallel stop for use in table saw mode to guide workpieces for rip cuts.
• Cut Stop: Position the cut stop for repetitive length cuts.
• Material Clamp: Install the material clamp to securely hold workpieces during cutting operations. It can be mounted from the top or front.
• Chip Collection Bag: Attach the chip collection bag to the dust port to manage sawdust.

5. Instruccions de funcionament

The Metabo KGT 305 M offers both miter saw and table saw functionalities. Always ensure the saw is securely placed on a stable surface before operation.

5.1 Miter Saw Operation

1. Select Miter Saw Mode: Ensure the saw is configured for miter cutting.
2. Ajustar l'angle del bisell: Loosen the angle adjustment lever/knob and pivot the table to the desired miter angle. Secure it firmly using the lock points for common angles.
3. Adjust Bevel Angle: If a bevel cut is required, tilt the saw head to the left to the desired angle. The saw head has an additional angle range for undercut cuts.
4. Posició de la peça: Place the workpiece firmly against the fence and table. Use the material clamp per assegurar-lo.
5. Activate Laser Guide and LED Light: Turn on the laser for precise cut line indication and the LED work light for illumination. These are mains powered and do not require batteries.
6. Engegar la serra: Press the On/Off switch. Allow the blade to reach full speed before cutting.
7. Realitza el tall: Slowly lower the saw head through the workpiece. Maintain a steady, controlled motion.
8. Release and Stop: Once the cut is complete, release the switch and allow the blade to stop completely before raising the saw head.

5.2 Table Saw Operation

1. Convert to Table Saw Mode: Follow the manufacturer's instructions for quickly converting the saw from miter to table saw operation. This typically involves locking the saw head in an upward position and adjusting the table.
2. Ajustar l'alçada de tall: Use the height adjustment mechanism to set the desired cutting height (0 - 50 mm).
3. Set Parallel Stop: Position the parallel stop to the desired width for rip cuts. Ensure it is securely locked.
4. Posició de la peça: Place the workpiece on the table, guiding it against the parallel stop.
5. Engegar la serra: Press the On/Off switch. Allow the blade to reach full speed.
6. Realitza el tall: Slowly and steadily feed the workpiece into the rotating blade, keeping it firmly against the parallel stop. Use a push stick for narrow cuts.
7. Stop the Saw: Once the cut is complete, release the switch and allow the blade to stop completely before removing the workpiece.

6. Manteniment

Regular maintenance ensures the longevity and safe operation of your Metabo KGT 305 M saw. Always disconnect the power supply before performing any maintenance.

• Neteja: Regularly clean the saw, especially the table, blade guard, and dust collection areas, to prevent sawdust buildup. Use a brush or compressed air.
• Inspecció de la fulla: Periodically inspect the saw blade for sharpness, damage, or missing teeth. Replace dull or damaged blades immediately. Refer to section 4.2 for blade change instructions.
• Lubricació: Apply a light coat of machine oil to moving parts and pivot points as recommended by the manufacturer to ensure smooth operation.
• Cable elèctric: Inspeccioneu el cable d'alimentació per detectar qualsevol signe de danys. No feu servir la serra si el cable està danyat.
• Elements de fixació: Check all screws and fasteners regularly and tighten them if necessary.

7. Solució De Problemes

This section addresses common issues you might encounter with your Metabo KGT 305 M saw.

For issues not listed here or if solutions do not resolve the problem, please contact Metabo customer service or an authorized service center.

8. Especificacions tècniques

9. Garantia i Suport

For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official Metabo weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

Metabo Official Weblloc: www.metabo.com