Jebao DP-3 Programmable Auto Dosing Pump User Manual

1. Introducció i finalview

The Jebao DP-3 is an advanced yet user-friendly automatic dosing pump designed for precise liquid dispensing in aquatic environments. Featuring three independent dosing heads, this pump allows users to maintain stable tank parameters by programming up to 24 dosing times per day for each channel. It eliminates the need for manual daily supplementation, making it ideal for both large and small increment dosing requirements.

2. Informació de seguretat

Please read and understand all safety instructions before operating the Jebao DP-3 Dosing Pump. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ensure the power supply is disconnected before performing any maintenance or setup.
• Do not immerse the pump unit in water. This product is designed for indoor use only.
• Keep the power adapter and electrical connections dry.
• Feu servir només l'adaptador de CA proporcionat.
• Mantenir fora de l'abast dels nens.
• Inspect the power cord and tubing regularly for any damage. Replace immediately if damaged.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Jebao DP-3 Dosing Pump Unit
• Adaptador de corrent alterna
• (Note: Dosing tubing is not included and must be purchased separately.)

4. Característiques del producte

• 3 Channel Dosing: Each channel can dispense 1 to 9999ml per day.
• Stable Parameters: Helps maintain consistent tank parameters, reducing the need for manual daily supplementation.
• Flexible Dosing: Capable of dosing both large and small increments.
• Easy Calibration: Plug and play operation after initial calibration with a 100ml graduated cylinder.
• Individual Programming: Each pump can be programmed independently for customized dosing schedules.

5. Configuració

Follow these steps to set up your Jebao DP-3 Dosing Pump:

1. Col·locació: Position the dosing pump in a dry, stable location near your aquarium or reservoir. Ensure it is above the water level to prevent back-siphoning.
2. Connexió de tubs: Connect appropriate dosing tubing (not included) to each of the three pump heads (P1, P2, P3) and route them to your liquid reservoirs and into your aquarium/sump. Ensure tubing is securely fastened to prevent leaks.
3. Connexió d'alimentació: Connect the AC power adapter to the pump unit and then plug it into a suitable power outlet. The "Power" indicator light will illuminate.
4. Calibració inicial:

   Before first use, calibrate each pump head for accurate dosing. Use a 100ml graduated cylinder for this process.

   • Access the calibration mode (refer to the operating instructions for specific button presses).
   • Run each pump channel to dispense 100ml of water into the graduated cylinder.
   • Adjust the calibration setting until the dispensed volume is precisely 100ml.
   • Repeat for all three channels.

   Note: Some users find that fine-tuning calibration by adjusting the programmed volume slightly (e.g., setting 27ml to achieve 30ml actual output) can improve accuracy for very small doses.

Figura 1: Frontal view of the Jebao DP-3 Dosing Pump, showing the three individual pump heads (P1, P2, P3) and power/communication indicator lights. Each pump head has tubing connected for liquid transfer.

Figura 2: Angle view of the Jebao DP-3 Dosing Pump, providing a clearer perspective of its compact design and the tubing connections for each dosing channel.

6. Instruccions de funcionament

The Jebao DP-3 features an intuitive controller for programming. Each pump channel can be programmed individually.

6.1. Configuració del rellotge

Ensure the internal clock is set correctly as it dictates the dosing schedule. The clock may gain time over extended periods, requiring occasional adjustment.

6.2. Programming Dosing Schedules

Each of the three channels (P1, P2, P3) can be programmed with up to 24 dosing events per day. The volume for each event can range from 1ml to 9999ml.

• Dosing Frequency: You can set the pump to dose daily (often indicated by '0' or '1' in the interval setting) or at intervals of up to 30 days.
• Volume per Dose: Specify the exact volume (in milliliters) for each scheduled dose.
• Time of Dose: Set the precise time for each dosing event.

Refer to the detailed instructions provided with your unit for specific button navigation and programming sequences. The controller allows for easy adjustment of settings for each channel independently.

7. Manteniment

Regular maintenance ensures the longevity and accurate operation of your Jebao DP-3 Dosing Pump.

• Inspecció de tubs: Periodically check the dosing tubing for kinks, blockages, or signs of wear. Replace tubing as needed.
• Pump Head Inspection: The peristaltic pump heads contain rollers and tubing that can wear over time. Inspect them for proper function and replace if they show signs of degradation or if dosing accuracy declines significantly. The unit may come with a spare pump head for replacement.
• Neteja: Keep the exterior of the pump unit clean and dry. Avoid using abrasive cleaners.
• Recalibració: It is recommended to recalibrate the pumps periodically, especially if you notice inconsistencies in dosing volume.

8. Solució De Problemes

If you encounter issues with your Jebao DP-3 Dosing Pump, refer to the following common problems and solutions:

9. Especificacions

10. Garantia i Suport

The Jebao DP-3 Programmable Auto Dosing Pump comes with a 180 dies de garantia des de la data de compra. Aquesta garantia cobreix defectes de fabricació i avaries en condicions d'ús normal.

For technical support, warranty claims, or inquiries regarding replacement parts (such as pump heads), please contact Jebao customer service. Refer to the contact information provided on the product packaging or the official Jebao weblloc.

Note: Warranty may be voided by improper installation, misuse, unauthorized modifications, or damage caused by external factors.