Garanties importants
Quan feu servir aparells elèctrics, sempre cal seguir les precaucions de seguretat bàsiques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals. Llegiu totes les instruccions abans d'utilitzar aquest aparell.
- Seguretat elèctrica: This appliance operates on 120V. Ensure the power outlet matches the appliance's voltage. Do not use with extension cords unless absolutely necessary and ensure the cord is rated for the appliance's wattage. Always plug into a grounded outlet.
- Col·locació: Posar el foc lamp on a stable, level, and heat-resistant surface. Ensure adequate clearance from walls and other objects to allow for proper ventilation. Do not place near flammable materials.
- Superfícies calentes: La calor lamp and bulbs become very hot during operation. Avoid direct contact with hot surfaces. Use caution when adjusting the lamp height or moving the unit.
- Manipulació de bombetes: Always allow bulbs to cool completely before attempting to replace them. Use only specified 250W/120V infrared shatter-resistant bulbs.
- Neteja: Always unplug the unit from the power outlet before cleaning. Allow the unit to cool down completely.
- Supervisió: Do not leave the appliance unattended while in operation. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Danys: No feu funcionar cap aparell amb el cable o l'endoll danyats, o després que l'aparell no funcioni correctament o s'hagi danyat de qualsevol manera. Poseu-vos en contacte amb personal de servei qualificat per a la seva revisió, reparació o ajust.
- Certificacions: This unit is ETL listed, conforming to UL-197, CSA C22.2, and NSF-4 standards for electrical safety and sanitation.
Producte acabatview
The Winco EHL-2C is a free-standing electric commercial heat lamp designed to maintain optimal serving temperatures for prepared food. It features a durable aluminum construction and a scratch-resistant finish for longevity and ease of maintenance.
Image: Winco EHL-2C Electric Free Standing Commercial Heat Lamp. This image shows the complete heat lamp unit with its two bulbs and adjustable stand.
Característiques principals:
- Alçada ajustable: Features a 3-position adjustable height mechanism to control heat intensity based on food type and serving requirements.
- Construcció duradora: Built with heavy-duty steel tubing and a durable scratch-resistant electrostatic powder-coated finish on hoods and frame.
- Twin Bulb System: Equipped with two 250W/120V Shat-R-Shield* shatter-resistant infrared bulbs for efficient and safe food warming.
- Estabilitat: Designed with improved countertop stability for secure operation.
- Compatibilitat: Compatible with most standard-size food trays.
- Cable d'alimentació: Includes a 6-foot power cord for flexible placement.
Configuració
- Desembalar: Traieu amb cura tots els components de l'embalatge. Conserveu l'embalatge per a futurs emmagatzematges o transports.
- Inspeccionar: Check the unit for any signs of damage incurred during shipping. Do not operate if damaged.
- Col·locació: Position the heat lamp on a clean, dry, stable, and level surface. Ensure there is sufficient space around the unit for air circulation and to prevent heat buildup. Keep away from walls, curtains, and other combustible materials.
- Bulb Installation (if not pre-installed): If bulbs are not already installed, carefully screw the two 250W/120V infrared bulbs into the sockets in the lamp hoods. Ensure they are securely tightened but do not overtighten.
- Connexió d'alimentació: Plug the 6-foot power cord into a dedicated 120V grounded electrical outlet. Ensure the outlet can handle the appliance's total wattage (500W).
Instruccions de funcionament
- Preparar menjar: Ensure food is cooked to its desired temperature before placing it under the heat lamp. The heat lamp is designed for holding food warm, not for cooking or reheating.
- Posició Aliments: Place the food in appropriate serving trays or dishes directly under the heat lamp.
- Ajusta l'alçada: Utilize the 3-position adjustable height feature to control the heat intensity. Lower the lamp for more intense heat, or raise it for a gentler warming effect. Consider the type of food and desired holding temperature.
- Encès: Locate the power switch, typically on the base or frame, and switch it to the 'ON' position. The bulbs will illuminate and begin emitting heat.
- Temperatura del monitor: Periodically check the food temperature to ensure it remains within safe serving temperatures (e.g., above 140°F / 60°C for most hot foods).
- Apagar: When finished, switch the power button to the 'OFF' position and unplug the unit from the electrical outlet. Allow the unit to cool down before handling or cleaning.
Manteniment i Neteja
Regular cleaning and maintenance will ensure the longevity and efficient operation of your Winco EHL-2C heat lamp.
- Desconnecteu l'alimentació: Always unplug the heat lamp from the power outlet and allow it to cool completely before performing any cleaning or maintenance.
- Neteja exterior: Wipe down the exterior surfaces, including the frame, hoods, and base, with a damp cloth and mild detergent. The scratch-resistant finish is designed for easy cleaning. Avoid abrasive cleaners or scouring pads, which can damage the finish.
- Bulb Cleaning: If necessary, gently wipe the bulbs with a dry, soft cloth once they are cool. Do not use liquids directly on the bulbs.
- Substitució de bombetes: If a bulb burns out, ensure the unit is unplugged and cool. Carefully unscrew the old bulb and replace it with a new 250W/120V infrared shatter-resistant bulb.
- Emmagatzematge: Si guardeu la unitat durant un període prolongat, assegureu-vos que estigui neta i seca. Guardeu-la en un lloc fresc i sec.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp does not turn on or heat. | Sense energia a la unitat. Bulb(s) are burnt out or loose. | Check if the unit is properly plugged into a working 120V outlet. Check the power switch is in the 'ON' position. Inspect bulbs; tighten if loose, replace if burnt out (ensure unit is unplugged and cool). |
| Food is not staying warm enough. | Lamp l'alçada és massa alta. Ambient room temperature is too low. Food quantity is too large for the lampla capacitat de. | Baixa la lamp to a closer position to the food. Ensure the operating environment is not excessively cold. Reduce the amount of food or use multiple warming units. |
| Unit emits unusual odors or smoke. | New unit burn-off (initial use). Food debris or foreign object on bulbs/hoods. | A slight odor during first use is normal. Ensure good ventilation. Immediately unplug the unit. Allow to cool and inspect for debris. Clean thoroughly before next use. If problem persists, discontinue use and contact support. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | EHL-2C |
| Voltage | 120 Volts |
| Wattage | 250W per bulb (500W total) |
| Tipus de bombeta | Infrared, Shat-R-Shield*, 250W/120V |
| Classificació de temperatura superior | 160 graus Fahrenheit |
| Dimensions del producte (L x A x A) | 19.8 x 14.19 x 23.75 polzades |
| Pes de l'article | 4.8 lliures |
| Material | Aluminum (frame and hoods: heavy-duty steel tubing with electrostatic powder coated finish) |
| Longitud del cable d'alimentació | 6 peus |
| Certificacions | ETL Listed (conforms to UL-197, CSA C22.2, NSF-4) |
| UPC | 652129091782 |
Garantia i Suport
This Winco EHL-2C Electric Free Standing Commercial Heat Lamp ve amb a garantia d'un any des de la data de compra, cobrint defectes de materials i fabricació en condicions d'ús normal.
For warranty claims, technical assistance, or to purchase replacement parts, please contact Winco customer support directly. Keep your purchase receipt as proof of purchase for warranty validation.
Winco Customer Support:
Refer to the contact information provided with your product packaging or visit the official Winco weblloc web per obtenir informació sobre el suport actual.