1. Producte acabatview
The Maxima SC1 High Gloss Coating is a specialized clear coat formulated for Powersports vehicles. It is designed to coat plastic, fiberglass, and painted surfaces, providing a high-gloss finish that restores factory shine and color. This coating also aids in making the clean-up process easier by preventing mud and dirt from adhering to treated surfaces, particularly effective on motorcycle and ATV fenders. SC1 is water resistant and leaves a dry, long-lasting luster.
Image 1: Maxima SC1 High Gloss Coating aerosol can. This image displays the product in its aerosol can form, featuring the "SC1 High Gloss" branding and product details.
2. Informació de seguretat
WARNING: This product is flammable. Read all safety warnings and instructions before use.
- Do not spray near open flames, sparks, or any ignition sources.
- Use in a well-ventilated area. Avoid breathing vapors.
- Mantenir fora de l'abast dels nens i mascotes.
- Utilitzeu equips de protecció individual adequats, com ara guants i ulleres de protecció, durant l'aplicació.
- Contents under pressure. Do not puncture or incinerate can. Do not expose to heat or store at temperatures above 120°F (49°C).
- Eliminar el contingut/envàs d'acord amb la normativa local.
- Aquest producte conté substàncies químiques que l'estat de Califòrnia sap que causen càncer i defectes congènits o altres danys reproductius (advertència de la Proposició 65).
3. Preparació i configuració
Proper surface preparation is essential for optimal results and adhesion of the SC1 coating.
- Netegeu la superfície: Ensure the surface to be treated is thoroughly clean and free of dirt, mud, grease, oil, and any other contaminants. Wash the vehicle or parts with a suitable cleaner and rinse thoroughly.
- Dry the Surface: Allow the surface to dry completely before application. Any moisture can affect the coating's performance and finish.
- Protect Surrounding Areas: Mask off any areas not intended for coating, such as tires, brakes, or sensitive components, to prevent overspray.
- Agitar la llauna: Shake the aerosol can vigorously for at least 30 seconds before use and occasionally during application to ensure proper mixing of contents.
4. Instruccions d'ús (aplicació)
Follow these steps for effective application of Maxima SC1 High Gloss Coating:
- Hold Can Correctly: Hold the can upright, approximately 8-12 inches (20-30 cm) from the surface.
- Aplicar uniformement: Apply a light, even coat over the desired plastic, fiberglass, or painted surfaces. Avoid over-saturating the surface. A thin, uniform layer is sufficient to achieve the desired high-gloss finish and protective properties.
- Deixeu assecar: Allow the coating to dry to a clear, high-gloss finish. Drying time may vary depending on temperature and humidity. The coating leaves a dry, long-lasting luster.
- Reaplicació: For continued protection and shine, reapply after washing the vehicle or as needed, especially on areas prone to mud and dirt accumulation.
5. Manteniment
The Maxima SC1 coating simplifies maintenance of your Powersports vehicle's appearance.
- Neteja regular: The coating helps prevent mud and dirt from adhering, making subsequent cleaning easier. Simply wash the vehicle as usual.
- Reapply After Washing: To maintain the high-gloss finish and water-resistant properties, it is recommended to reapply SC1 after each thorough wash.
- Inspect Coated Surfaces: Periodically inspect treated surfaces for signs of wear or diminished shine, and reapply as necessary.
6. Solució De Problemes
While Maxima SC1 is designed for easy application, here are some common issues and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Uneven finish / Streaks | Too much product applied; uneven application; surface not clean. | Apply a lighter, more even coat. Ensure surface is thoroughly clean and dry before application. |
| Poor adhesion / Flaking | Surface not properly cleaned or dried; incompatible surface material. | Ensure surface is completely clean and dry. SC1 is designed for plastic, fiberglass, and painted surfaces. |
| No shine after drying | Insufficient product applied; surface too porous. | Apply another light, even coat. Ensure the can is well-shaken before and during use. |
7. Especificacions
| Nom del producte | SC1 High Gloss Coating |
| Marca | Màxima |
| Número de model | 78920 |
| Color | Clar |
| Tipus d'acabat | Gran brillantor |
| Volum de l'article | 12 unces líquides (355 ml) |
| Característica especial | Resistent a l'aigua |
| Tipus de pintura | Spray d’aerosol |
| Usos específics | Powersports Vehicles (M/C, ATV), Plastic, Fiberglass, Painted Surfaces |
| Recomanació de superfície | Plastic, Fiberglass, Painted Surfaces |
| Informació del paquet | Aerosol Can |
| Pes de l'article | Approximately 1 pound (454 grams) |
8. Emmagatzematge i eliminació
- Emmagatzematge: Store in a cool, dry, well-ventilated area away from direct sunlight, heat sources, and incompatible materials. Keep container tightly closed when not in use. Do not store at temperatures above 120°F (49°C).
- Eliminació: Dispose of contents and container in accordance with all local, regional, national, and international regulations. Do not puncture or incinerate empty cans.
9. Garantia i Suport
For specific warranty information or technical support regarding your Maxima SC1 High Gloss Coating, please refer to the official Maxima website or contact Maxima customer service directly. Information regarding product warranties is typically provided by the manufacturer.
Image 2: Maxima Racing Oils company logo. This logo represents the brand Maxima, known for its racing oils and performance products.
You can visit the official Maxima weblloc per a més informació: www.maximausa.com
