Introducció
The Rollei Wired Shutter Release for Nikon is designed to provide precise and vibration-free control over your camera's shutter, essential for various photographic techniques such as long exposures and time-lapse photography. Featuring an easy-to-read backlit LCD screen and comprehensive timer functions, this remote control enhances your photographic capabilities by allowing you to manage exposure times, intervals, and continuous shooting settings with ease.
Contingut del paquet
- Rollei Wired Shutter Release
- Cable adaptador
- Piles AAA
- Manual d'usuari
Configuració
- Insereix les piles: Open the battery compartment on the back of the shutter release and insert the provided AAA batteries, ensuring correct polarity.
- Connecta a la càmera: Connect the appropriate adapter cable to the shutter release. Then, connect the other end of the adapter cable to your Nikon camera's remote control port. Ensure the connection is secure.
- Encès: Turn on your camera and then power on the Rollei Wired Shutter Release. The LCD screen should illuminate.
Image: The Rollei Wired Shutter Release, showing its LCD screen, control buttons, and coiled connection cable.
Image: Two different adapter cables, allowing compatibility with various Nikon camera models.
Instruccions de funcionament
The Rollei Wired Shutter Release offers various modes for precise camera control. Use the directional buttons and 'SET' button to navigate and adjust settings on the LCD screen.
Basic Shutter Release
- Mitja premsa: Press the main shutter button halfway down to activate autofocus.
- Premsa completa: Press the main shutter button all the way down to take a photo.
- Bulb Mode (Long Exposure): In your camera's Bulb mode, press and hold the shutter button on the remote to keep the shutter open for the desired duration. Release to close.
Timer and Intervalometer Functions
The remote features advanced timer functions for delayed shooting, long exposures, interval shooting, and continuous shots. Use the mode button to cycle through the available timer settings (DELAY, LONG, INTVAL, N, BKLN) and the directional buttons to adjust values.
- RETARD: Set a delay before the first shot (e.g., for self-portraits or to avoid camera shake).
- LLARG: Set the exposure time for each shot (up to 100 hours). Requires camera to be in Bulb mode.
- INTVAL (Interval): Set the time interval between consecutive shots for time-lapse photography.
- N (Number of Shots): Specify the number of photos to be taken (1 to 399, or unlimited).
- BKLN (Backlight): Activate the LCD screen backlight for use in low-light conditions.
After setting your desired parameters, press the 'TIMER START/STOP' button to begin the sequence.
Image: The Rollei Wired Shutter Release in use, connected to a Nikon camera mounted on a tripod, demonstrating a typical setup for remote shooting.
Vídeo demostració
Video: Official Rollei demonstration of a similar wired shutter release (Canon version), showcasing its features and operation, including the LCD screen and timer functions.
Video: A general demonstration of a wired shutter release, showing its connection to a camera and basic functions like half-press for focus and full-press for shooting.
Video: A brief demonstration of a wired shutter release, highlighting its simple connection and immediate shutter activation.
Compatibilitat
This Rollei Wired Shutter Release is compatible with the following Nikon camera models:
- D1, D1H, D1X, D2, D2H, D2HS, D2X, D3, D3S, D3X, D4, D4S, D5
- D90, D100, D200, D300, D300S, D500, D600, D610, D700, D750, D800, D800E, D810, D850
- D3100, D3200, D3300, D5000, D5100, D5200, D5300, D5500, D5600
- D7000, D7100, D7200, D7500
- DF, P7700, P7800, V1, Coolpix A
Manteniment
- Keep the device dry and clean. Avoid exposure to water or excessive humidity.
- Do not expose the device to strong vibrations or impacts.
- For prolonged storage, remove the AAA batteries to prevent leakage and damage.
- Clean the LCD screen and body with a soft, dry cloth. Avoid abrasive cleaners.
Resolució de problemes
- El dispositiu no s'encén: Check if the AAA batteries are inserted correctly and are not depleted. Replace if necessary.
- La càmera no respon: Ensure the adapter cable is securely connected to both the shutter release and the camera's remote port. Verify that your camera is powered on and set to the appropriate shooting mode (e.g., Bulb mode for long exposures).
- LCD screen not visible in low light: Press the backlight button on the remote to illuminate the screen.
- Incorrect exposure times in Bulb mode: Ensure your camera is correctly set to Bulb mode. The remote's 'LONG' setting will then control the exposure duration.
Especificacions
- Fabricant: Rollei
- Número de model: 28005
- Dimensions del producte: 15.5 x 4 x 1.8 cm
- Pes: 80 grams
- Tecnologia de connectivitat: Wired (Radiofrequency mentioned in specs is likely an error or for a different variant, as this is a wired product)
- Característica especial: Pre-programmed, manual long exposure with time indication, backlit LCD.
- Color: Negre
Garantia i Suport
Rollei offers a 24 mesos de garantia for this product. In case of defects or malfunctions, please contact your retailer or Rollei customer support for assistance. Free returns are available within 14 days of purchase.
For further support and information, please visit the Rollei Store on Amazon.
