1. Introducció
The Watt Stopper Digital Time Switch TS-200 Inteliswitch is an advanced wall-mounted timer designed to control lighting or other electrical loads. It features a digital display for easy programming and provides automated control based on user-defined schedules, enhancing energy efficiency and convenience.
2. Informació de seguretat
WARNING: RISK OF ELECTRIC SHOCK. IMPROPER INSTALLATION CAN LEAD TO SERIOUS INJURY OR DEATH.
- La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics nacionals i locals.
- Turn off power at the circuit breaker or fuse box before installing or servicing the device.
- Assegureu-vos que totes les connexions dels cables estiguin segures i correctament aïllades.
- Do not install with wet hands or while standing on wet surfaces.
- Aquest dispositiu només està dissenyat per a ús interior.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Watt Stopper Digital Time Switch TS-200 Inteliswitch
- Cargols de muntatge
- Wire Nuts (optional, may be included)
- Manual d'instruccions (aquest document)
4. Instal·lació i configuració
Follow these steps carefully to install your TS-200 Inteliswitch.
4.1 Preinstal·lació
- Apagueu l'alimentació: Locate the circuit breaker controlling the switch location and turn it OFF. Verify power is off using a voltage provador.
- Treure l'interruptor antic: Carefully remove the existing wall plate and switch from the wall box. Disconnect the wires, noting their connections.
4.2 Instruccions de cablejat
The TS-200 requires specific wiring connections. Refer to the diagram below and the wire labels on the device.
Imatge: Frontal view of the Watt Stopper TS-200 Inteliswitch, showing the digital display, control button, and exposed wiring (green, black, red, yellow) on the left side. The device is ivory-colored and designed for wall mounting.
- Green Wire (GND): Connect to the ground wire from the wall box.
- Black Wire (277V): Connect to the incoming line voltage (hot) wire from the wall box.
- Fil vermell: Connect to the load wire (to the light fixture or appliance).
- Fil groc: Typically used for 3-way applications or specific control functions. Refer to detailed wiring diagrams for your specific setup. If not used, cap off securely.
Use wire nuts to secure all connections. Ensure no bare wire is exposed.
4.3 Muntatge
- Carefully push the wired switch into the wall box.
- Secure the switch to the wall box using the provided mounting screws.
- Attach the wall plate (not included with the switch) over the switch.
4.4 Engegada inicial
Once installation is complete, turn the power back ON at the circuit breaker. The device will undergo an initial warm-up period, which may take approximately 30 seconds, as indicated by the label on the device. The display should then illuminate.
5. Funcionament
The TS-200 Inteliswitch features a digital display and a central control button for interaction.
- ON/OFF manual: Press the central button briefly to manually toggle the connected load ON or OFF. This will override any active program until the next scheduled event.
- Visualització: The digital display shows the current time, day, and operational status (e.g., ON/OFF, program mode).
6. Programació
Detailed programming instructions are typically accessed by pressing and holding the central button or a combination of button presses. Refer to the on-screen prompts for specific steps.
6.1 Configuració de l'hora i la data
Access the settings menu (usually by holding the main button). Use the button to navigate and adjust hours, minutes, day, month, and year. Confirm each setting to save.
6.2 Creating Schedules
The TS-200 allows for multiple ON/OFF programs. Navigate to the "Program" or "Schedule" menu. Select a program slot and set the desired ON time, OFF time, and the days of the week for the program to be active. Repeat for additional programs.
6.3 Modes de funcionament
The switch may offer various operating modes such as:
- Automàtic: Follows programmed schedules.
- manual: Stays ON or OFF until manually changed.
- Aleatori: Varies ON/OFF times slightly for a lived-in look (e.g., for security).
- Vacances: Suspends normal programming for a set period.
Select the desired mode from the menu.
7. Manteniment
The TS-200 Inteliswitch requires minimal maintenance.
- Neteja: Netegeu la superfície amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Bateria interna: The device contains an internal battery to maintain time and program settings during power outages. This battery is typically long-lasting and not user-replaceable. If the device consistently loses settings after power interruptions, professional service may be required.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén. | No power at the circuit breaker; incorrect wiring; faulty device. | Check circuit breaker. Verify wiring connections. If problem persists, consult an electrician. |
| Load does not turn ON/OFF as programmed. | Incorrect program settings; manual override active; incorrect time/date. | Review program settings. Check if manual override is active. Verify current time and date. |
| La pantalla està en blanc o parpelleja. | Problema d'alimentació; fallada interna. | Check power supply. If flickering, power cycle the device (turn off/on at breaker). If problem persists, contact support. |
9. Especificacions
- Model: TS-200
- Marca: Watt Stopper
- Voltage: 277V (as indicated on device wiring)
- Tipus: Interruptor horari digital
- Color: Marfil
- UPC: 791689997667
- Primer disponible: 30 d'agost de 2016
10. Garantia i Suport
For warranty information and technical support, please refer to the official Watt Stopper weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
Weblloc: www.wattstopper.com (Example link, verify actual site)
Atenció al client: Consulteu el fabricant weblloc per obtenir dades de contacte.
