Audio System HLC-2 Plus 2-Channel High-Low Converter User Manual

1. Introducció

This manual provides essential instructions for the proper installation, operation, and maintenance of your Audio System HLC-2 Plus 2-Channel High-Low Converter. Please read this manual thoroughly before using the device to ensure optimal performance and safety. Keep this manual for future reference.

2. Instruccions de seguretat

• Assegureu-vos que totes les connexions estiguin ben fixades i degudament aïllades per evitar curtcircuits.
• Disconnect the vehicle's battery before performing any wiring to avoid electrical shock or damage to the system.
• No exposeu el dispositiu a la humitat ni a temperatures extremes.
• Si no esteu segurs de cap pas, la instal·lació l'ha de dur a terme un professional qualificat.
• Mount the converter in a location where it is protected from physical damage and excessive heat.

3. Contingut del paquet

• Audio System HLC-2 Plus 2-Channel High-Low Converter
• Wiring Harness (if applicable, based on image)
• Remote Control Unit (if applicable, based on image)
• Manual d'usuari (aquest document)

4. Producte acabatview

Figura 1: Audio System HLC-2 Plus 2-Channel High-Low Converter. The image displays the main converter unit, a black rectangular box with a rotary knob for level adjustment (Min to Max) and a 'POWER' button. Two RJ-style cables with clear plastic connectors are shown connected to the unit, representing the wiring harness for signal input/output and remote turn-on.

The Audio System HLC-2 Plus is a 2-channel high-low converter designed to integrate aftermarket amplifiers with factory car stereos that lack RCA pre-outs. It converts high-level speaker signals into low-level RCA signals, providing a clean audio output for your amplifier. Key features include:

• Compatibility with all original OEM radios.
• 2-way high-low conversion with remote turn-on signal generation.
• Designed to prevent interference and turn-on noise.
• Excellent sound quality through PSA and 5-volt technology.
• Features a plug-in connection terminal for ease of installation.
• Fast and accurate music recognition.

5. Configuració i instal·lació

5.1 Diagrama de cablejat (general)

A detailed wiring diagram is crucial for correct installation. While specific diagrams may vary, the general connections are as follows:

1. Entrada d'alt nivell: Connect the speaker outputs from your factory radio to the high-level inputs of the HLC-2 Plus. Ensure correct polarity (positive to positive, negative to negative) for each channel.
2. Sortida de baix nivell: Connect the RCA outputs from the HLC-2 Plus to the RCA inputs of your aftermarket ampmés viu.
3. Encès remot: The HLC-2 Plus generates a remote turn-on signal. Connect this output to the remote input of your amplifier. This will turn on your amplifier automatically when the factory radio is powered on.
4. Power/Ground: The unit typically draws power from the high-level input signal, eliminating the need for a separate power wire. Ensure a good ground connection if specified by the manufacturer.

5.2 Passos d'instal·lació

1. Desconnecta la bateria: Desconnecteu sempre el terminal negatiu de la bateria del vostre vehicle abans de començar qualsevol treball elèctric.
2. Access Speaker Wires: Locate and access the speaker output wires from your factory head unit or ampmés viu.
3. Connect High-Level Inputs: Splice the factory speaker wires to the corresponding high-level input wires of the HLC-2 Plus. Use high-quality connectors or solder for secure connections.
4. Connect RCA Outputs: Run RCA cables from the HLC-2 Plus to your aftermarket ampmés viu.
5. Connect Remote Wire: Connect the remote output wire from the HLC-2 Plus to the remote turn-on input of your ampmés viu.
6. Muntar el convertidor: Securely mount the HLC-2 Plus in a dry, accessible location, away from heat sources and moving parts.
7. Torneu a connectar la bateria: Un cop verificades totes les connexions, torneu a connectar la bateria del vehicle.

6. Instruccions de funcionament

6.1 Engegada inicial

After installation, turn on your vehicle's ignition and then the factory radio. The HLC-2 Plus should automatically detect the audio signal and send a remote turn-on signal to your amplifier, powering it on.

Ajust de 6.2 nivells

The HLC-2 Plus features a rotary knob (Min-Max) for adjusting the output level. This allows you to match the output signal of the converter to the input sensitivity of your amplifier. Start with the knob at the minimum setting and gradually increase it while listening for distortion. Adjust until a clean, strong signal is achieved without clipping at the ampmés viu.

6.3 Botó d'encesa

The 'POWER' button on the unit is typically an indicator or a manual override. Refer to specific product documentation if its function deviates from automatic operation.

7. Manteniment

• Mantingueu la unitat neta i lliure de pols i deixalles. Feu servir un drap suau i sec per netejar-la.
• Ensure all wiring connections remain secure over time. Periodically check for loose connections.
• Avoid exposing the unit to direct sunlight or extreme heat, which can affect its lifespan.
• No user-serviceable parts are inside. Do not attempt to open or repair the unit yourself.

8. Solució De Problemes

9. Especificacions

• Model: HLC-2 Plus
• Número de peça: 020020112
• Canals: 2-Canals
• Potència màxima de sortida de l'altaveu: 70 Watts (input handling)
• Impedància: 4 Ohm (input impedance)
• Mètode de control: Remote Control (via generated turn-on signal)
• Font d'alimentació: Vehicle's 12V electrical system (typically signal-sensing)
• Pes: Aproximadament 997.9 g (2.2 lliures)

10. Garantia i Suport

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Audio System customer service. Keep your proof of purchase for warranty claims.