Hormann HSE4 BS Remote Control Instruction Manual

Introducció

This manual provides detailed instructions for the setup, operation, and maintenance of your Hormann HSE4 BS remote control. The HSE4 BS is a 4-button handheld transmitter featuring Hormann's secure BiSecur wireless technology, designed for controlling garage doors, entrance gates, and other compatible Hormann operators.

Each of the four buttons can be individually programmed to control different functions or devices, offering convenience and flexibility. The integrated keyring eyelet allows for easy attachment to your keys, ensuring it is always accessible.

Imatge: Frontal view of the Hormann HSE4 BS remote control, showing its sleek black design and four distinct control buttons.

Configuració i Programació

The Hormann HSE4 BS remote control comes with a pre-installed lithium metal battery. Before initial use, it is necessary to program the remote control to your Hormann operator or copy the code from an existing remote.

Programming to an Existing Remote Control (Hand-to-Hand Copy)

1. Prepara el nou comandament a distància: Hold the new HSE4 BS remote control.
2. Prepare the Existing Remote: Take your existing, working Hormann remote control.
3. Inicia l'aparellament: Press and hold the desired button on your existing remote control. The LED on the existing remote will light up.
4. Transfer Code: While still holding the button on the existing remote, immediately press and hold the corresponding button on the new HSE4 BS remote control.
5. Confirmació: The LED on the new HSE4 BS remote will flash slowly, then rapidly, and finally stay illuminated, indicating successful programming. Release both buttons.
6. Funcionalitat de prova: Test the newly programmed button with your operator. If it does not work, repeat the process. It may require several attempts for successful pairing.

Nota: Some users report that pressing both buttons simultaneously (existing and new) without delay can improve success rates.

Programming Directly to the Operator Unit

For optimal security and functionality, or if you do not have an existing remote, it is recommended to program the HSE4 BS directly to your Hormann operator unit. The exact procedure may vary slightly depending on your specific operator model (e.g., SupraMatic, ProMatic, RotaMatic). Refer to your operator's instruction manual for precise steps. Generally, the process involves:

1. Access Operator: Locate the programming button on your Hormann garage door or gate operator unit. This button is often labeled "P" or "PRG".
2. Activa el mode d'aprenentatge: Press and release the programming button on the operator. The operator's LED indicator will typically start flashing, indicating it is in learning mode.
3. Transmit Code: Within a few seconds, press and hold the desired button on your new HSE4 BS remote control.
4. Confirmació: The operator's LED will change its flashing pattern or illuminate steadily to confirm successful programming. Release the button on the remote.
5. Funcionalitat de prova: Test the remote control with the operator.

Nota important de compatibilitat: This remote control is compatible with Hormann operators such as SupraMatic E/P, SuperMatic HT, ProMatic, ProMatic Accu, RollMatic, RotaMatic/P/PL, RotaMatic Accu Solar, VersaMatic/P, VersaMatic Accu Solar, LineaMatic/P, and LineaMatic Accu Solar. It is NO suitable for the Liftronic garage door motor.

Instruccions de funcionament

Once programmed, operating your Hormann HSE4 BS remote control is straightforward.

1. Seleccioneu la funció: Identify the button on your remote control that has been programmed for the desired function (e.g., opening/closing the garage door, opening the gate).
2. Activar: Press the corresponding button firmly for approximately one second.
3. Observa: The operator will respond according to its programmed function. The remote's LED will illuminate during transmission.

Imatge: Primer pla view of the four control buttons on the Hormann HSE4 BS remote control, with a small LED indicator above them.

Manteniment

The Hormann HSE4 BS remote control requires minimal maintenance to ensure long-lasting performance.

Canvi de bateria

The remote control is powered by a single lithium metal battery (CR2032 type, typically). When the battery is low, the remote's LED indicator may flash briefly or not illuminate at all when a button is pressed, or the range may decrease significantly.

1. Obre Casing: Obriu amb cura el comandament a distància casing. This usually involves prying open a small seam with a thin tool or screwdriver.
2. Treure la bateria antiga: Remove the old CR2032 battery. Note its polarity (+/-).
3. Inseriu una bateria nova: Insert a new CR2032 lithium metal battery, ensuring correct polarity.
4. Tanca Casing: Snap the casintorneu a unir-se de manera segura.

Eliminació: Dispose of used batteries according to local regulations. Do not dispose of batteries in household waste.

Neteja

Netegeu el comandament a distància amb un drap suau i sec. No utilitzeu netejadors ni dissolvents abrasius, ja que poden danyar el comandament.asing and electronics.

Imatge: Enrere view of the Hormann HSE4 BS remote control, showing the model number (HSE4-868-BS) and regulatory markings.

Resolució de problemes

Especificacions

• Model: HSE4 BS
• Fabricant: Hormann
• Número de peça: 4511736
• Dimensions (L x A x A): 11 x 6.5 x 3 cm (aproximadament 4.3 x 2.6 x 1.2 polzades)
• Pes: 40 grams (aproximadament 1.4 unces)
• Color: Negre
• Nombre de botons: 4
• Tecnologia de connectivitat: Radio Frequency (BiSecur)
• Font d'alimentació: Funciona amb piles
• Tipus de bateria: 1 x Lithium metal (CR2032), included
• Característica especial: Pre-programmed (can be reprogrammed)
• Compatible Operators: SupraMatic E/P, SuperMatic HT, ProMatic, ProMatic Accu, RollMatic, RotaMatic/P/PL, RotaMatic Accu Solar, VersaMatic/P, VersaMatic Accu Solar, LineaMatic/P, LineaMatic Accu Solar, Hormann ProMatic Serie 4.
• Incompatible Operators: Liftronic garage door motor.
• País d'origen: Alemanya

Informació de la garantia

Based on available product information, there is no manufacturer's warranty explicitly stated for this product. Please refer to your point of purchase for any applicable retailer warranties or return policies.

Atenció al client

Should you encounter any issues not covered in this manual or require further assistance, please contact Hormann customer support or your authorized Hormann dealer. You can typically find contact information on the official Hormann weblloc web o a través del vostre distribuïdor de productes.

When contacting support, please have your product model (HSE4 BS) and any relevant purchase details ready.

For additional resources and product information, visit the official Hormann weblloc: www.hormann.com