3M Steri-Strip Reinforced Skin Closures (Model R1548) Instruction Manual

1. Introducció

This manual provides essential instructions for the proper use and care of 3M Steri-Strip Reinforced Skin Closures. These strips are designed to provide wound support and closure for various types of skin injuries and surgical incisions. Adherence to these instructions is crucial for optimal performance and patient safety.

2. Producte acabatview

3M Steri-Strips are adhesive skin closure strips utilized for closing lacerations, surgical incisions, and for support after early suture or staple removal. They are constructed from a microporous non-woven material, reinforced with filaments for enhanced strength, and feature a pressure-sensitive, hypoallergenic adhesive.

• Dimensions: 1 polzades x 5 polzades (25 mm x 125 mm)
• Material: Microporous non-woven material with reinforced filaments
• Adhesiu: Pressure-sensitive, hypoallergenic
• Esterilitat: estèril
• Sense làtex: Sí

Image 1: Packaging for 3M Steri-Strip Reinforced Skin Closures. This image displays the packaging for 3M Steri-Strip Reinforced Skin Closures. Each package contains multiple envelopes of sterile strips. The label on the right shows product details such as '1 in x 5 in', '25 mm x 125 mm', and model number 'R1548', along with manufacturer information and safety warnings.

3. Informació de seguretat

Observe the following safety guidelines to ensure proper and safe use of 3M Steri-Strip Skin Closures:

• Esterilitat: Do not use if the package is damaged or open. The product is sterile and must be handled as such.
• Ús sol: Do not reuse the strips. Reuse may compromise sterility and effectiveness.
• Instruccions: Always refer to these instructions for use prior to application.
• Assessorament mèdic: This product is intended for medical use. Consult a healthcare professional for proper wound assessment and treatment.
• Exempció de responsabilitat: Les declaracions sobre suplements dietètics no han estat avaluades per la FDA i no tenen la intenció de diagnosticar, tractar, curar o prevenir cap malaltia o afecció de salut.

4. Configuració i preparació

Proper preparation of the wound and surrounding skin is essential for effective adhesion and wound closure.

1. Clean the Wound: Gently clean the wound and surrounding skin according to standard medical protocols. Ensure the area is free from dirt, debris, and any topical agents that may interfere with adhesion.
2. Dry the Skin: Thoroughly dry the skin around the wound. Moisture can significantly reduce the adhesive's effectiveness.
3. Higiene de mans: Wash hands thoroughly or use appropriate sterile gloves before handling the strips to maintain sterility.

5. Application Instructions (Operating)

Follow these steps for the correct application of 3M Steri-Strip Skin Closures:

1. Paquet obert: Carefully open the sterile package without touching the strips directly.
2. Peel Strip: Gently peel a Steri-Strip from its backing card. Avoid stretching the strip during removal.
3. Align Wound Edges: Approximate the edges of the wound with gentle pressure.
4. Apply First Half: Apply one half of the strip to one side of the wound, ensuring good skin contact.
5. Secure Across Wound: While maintaining wound edge approximation, apply the other half of the strip to the opposite side of the wound. Do not apply the strip under tension.
6. Espai uniforme: Apply additional strips parallel to the first, spacing them approximately 1/8 inch (3 mm) apart, until the wound is adequately closed.
7. Reforçar (opcional): For added security, apply strips perpendicular to the primary strips, overlapping the ends of the primary strips.

6. Maintenance and Removal

Proper care of the applied Steri-Strips helps ensure optimal wound healing. Do not get the strips wet, as this can compromise adhesion.

• Mantenir sec: Avoid prolonged exposure to water. If the strips become wet, gently pat them dry.
• Monitor: Regularly inspect the wound and strips for signs of infection, irritation, or loosening.
• Eliminació: Steri-Strips typically remain in place for 5-10 days, or as advised by a healthcare professional. To remove, gently peel back each strip from the ends towards the wound, supporting the skin. Do not pull abruptly.

7. Solució De Problemes

Si teniu problemes durant o després de l'aplicació, tingueu en compte el següent:

• Strips Not Sticking: Ensure the skin was thoroughly cleaned and dried before application. Avoid applying over hair or oily skin.
• Irritació de la pell: If redness, itching, or irritation occurs, remove the strips and consult a healthcare professional. This may indicate an allergic reaction or improper application.
• Wound Re-opening: If the wound edges separate or the strips come off prematurely, clean the area and reapply new strips if appropriate, or seek medical attention.

8. Especificacions

9. Garantia i Suport

For product inquiries, technical support, or to report an issue, please contact 3M Health Care directly.

• Fabricant: 3M Health Care
• Telèfon: 1-800-228-3957
• Weblloc: www.3M.com/SkinWoundCare

Specific warranty information for 3M Steri-Strip Reinforced Skin Closures is not detailed in this manual. Please contact 3M customer service for any warranty-related questions.