1. Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your FINDER 12.11.8.230.0000 Programmable Timer. Please read this manual carefully before using the device to ensure safe and efficient operation.
2. Informació de seguretat
Avís: Electrical installation should only be performed by qualified personnel. Disconnect power before installation or maintenance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the power supply matches the device's specifications (230VAC).
- No exposeu el dispositiu a la humitat ni a temperatures extremes.
- No intenteu reparar o modificar el dispositiu vosaltres mateixos. Poseu-vos en contacte amb personal de servei qualificat.
3. Producte acabatview
The FINDER 12.11.8.230.0000 is a daily/weekly programmable timer designed for DIN rail mounting. It features a 15-minute to 24-hour timing range and a SPST-NO (Single Pole Single Throw - Normally Open) contact configuration, capable of switching up to 16A at 250VAC.
Figura 1: Davant view of the FINDER 12.11.8.230.0000 Programmable Timer. This image shows the timer module with its transparent cover, revealing the time setting dial and indicators. The electrical connection terminals are visible at the top, and wiring diagrams (N, M, L, 1, 2, 3) are printed on the lower front face.
Components clau:
- Time Setting Dial: Used to set the desired ON/OFF periods.
- Interruptor d'anul·lació manual: Allows temporary manual control (ON/OFF) independent of the programmed schedule.
- Terminals de connexió: For power input (L, N) and load connection (1, 2, 3 for SPST-NO contact).
- Coberta transparent: Protects the setting dial and indicators.
4. Configuració i instal·lació
4.1 Muntatge
The timer is designed for DIN rail mounting. Securely attach the device to a standard 35mm DIN rail within an electrical enclosure.
4.2 Esquema de cablejat
Refer to the wiring diagram printed on the device and follow local electrical codes. Ensure all connections are tight and secure.
- L: Live input (230VAC)
- N: Entrada neutral
- 1: Common terminal for the switch contact
- 2: Normally Open (NO) terminal for the switch contact
- 3: (If present, typically for internal motor or additional contact, refer to specific product markings)
Connect the load to terminals 1 and 2. When the timer activates, the contact between 1 and 2 will close, supplying power to the load.
5. Instruccions de funcionament
5.1 Configuració de l'hora actual
- Rotate the main time setting dial (usually marked with hours 0-24) clockwise until the current time aligns with the reference arrow or marker on the timer's body.
5.2 Programming ON/OFF Periods
The timer typically uses small segments or pins around the dial to set ON/OFF times. Each segment usually represents a 15-minute interval.
- To set an "ON" period, push the corresponding segments outwards.
- To set an "OFF" period, leave the corresponding segments pushed inwards.
- Ensure that the total ON/OFF periods cover the desired 24-hour cycle.
5.3 Anulació manual
The timer may have a manual override switch (often labeled with symbols like 'I', 'O', or a clock icon). This switch allows you to temporarily bypass the programmed schedule.
- 'I' (ON): Forces the output ON, regardless of the program.
- 'O' (OFF): Forces the output OFF, regardless of the program.
- Clock Symbol (AUTO): Returns control to the programmed schedule.
6. Manteniment
The FINDER 12.11.8.230.0000 timer is designed for maintenance-free operation. However, periodic checks are recommended:
- Ensure the device is free from dust and debris.
- Verifiqueu que totes les connexions elèctriques romanguin segures.
- Check for any signs of overheating or damage.
For cleaning, use a dry, soft cloth. Do not use abrasive cleaners or solvents.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Timer not switching ON/OFF | No power supply; Incorrect wiring; Manual override engaged; Incorrect program setting. | Check power supply; Verify wiring against diagram; Set manual override to AUTO; Recheck program segments. |
| La càrrega no rep energia | Faulty load; Loose connections; Overload protection tripped. | Test the load independently; Tighten all connections; Check circuit breaker/fuse. |
| Timer runs continuously ON/OFF | Manual override engaged; Internal fault. | Set manual override to AUTO; If problem persists, contact support. |
8. Especificacions
- Número de model: 12.11.8.230.0000
- Marca: TROBADOR
- Funció: Programmable Time Switch (15min-24h)
- Tipus de contacte: SPST-NO (Single Pole Single Throw - Normally Open)
- Valoració de contacte: 16 A / 250 VCA
- Subministrament Voltage: 230 VCA
- Muntatge: Carril DIN
- ASIN: B01LZY31HX
9. Assistència i garantia
For technical support or warranty inquiries, please contact your retailer or the official FINDER customer service. Keep your purchase receipt as proof of purchase.
Information regarding spare parts availability is currently unavailable. Please consult with your supplier for further details.
