1. Producte acabatview
The TownSteel TDC 85-DA-AL is a heavy-duty hydraulic door closer designed for commercial applications. It features a rack and pinion mechanism with delayed action, providing controlled closing for various door types. This non-handed unit is suitable for both interior and exterior doors, offering adjustable spring sizes from 1 to 6 to accommodate different door weights and closing forces.
Les característiques clau inclouen:
- Hydraulic/Spring powered operation.
- Heavy-duty closer performance.
- Non-handed design for versatile installation.
- Adjustable spring size from 1 to 6.
- Delayed action arm type.
- Suitable for commercial doors with widths up to 42 inches (exterior) and 48 inches (interior).
- Aluminum finish.
Image 1.1: All components of the TownSteel TDC 85-DA-AL door closer, including the main closer body, standard arm assembly, and cover.
2. Configuració i instal·lació
Proper installation is crucial for the optimal performance and longevity of your door closer. This section outlines the general steps for standard arm mounting. Refer to the included template for precise drilling locations.
2.1. Eines necessàries
- Trepant
- Drill bits (appropriate for door/frame material)
- Tornavís (Phillips i/o de punta plana)
- Cinta mètrica
- Llapis
- Nivell
- Wrench (for arm adjustments)
2.2. Opcions de muntatge
The TDC 85-DA-AL supports various mounting configurations. The most common is standard arm mounting on the pull side of the door. Other options may include top jamb or parallel arm mounting, each requiring specific templates and arm configurations.
2.3. Installation Steps (Standard Arm Mounting)
- Prepare the Door and Frame: Ensure the door and frame surfaces are clean and free of obstructions. Determine the desired mounting location based on the door's swing and traffic.
- Apply Template: Securely tape the provided mounting template to the door and frame at the chosen location. Ensure it is level and correctly aligned.
- Perforar forats pilot: Using the template as a guide, drill pilot holes for the closer body and the arm shoe. Use appropriate drill bits for your door and frame material (wood, metal, etc.).
- Cos Mount Closer: Attach the main closer body to the door using the provided mounting hardware. Ensure it is securely fastened and level.
- Install Arm Assembly:
- Attach the main arm to the closer's spindle.
- Attach the forearm (shoe arm) to the frame using the arm shoe and mounting hardware.
- Connect the main arm and forearm using the connecting screw.
- Ajustar la longitud del braç: Adjust the length of the arm assembly so that the forearm is perpendicular to the door frame when the door is closed. This is critical for proper operation.
- Instal·lar la coberta: Once the closer is mounted and the arm is adjusted, place the cover over the closer body.
Nota: For detailed diagrams and specific measurements, always refer to the official installation template included with your product.
3. Operating and Adjustment
The TownSteel TDC 85-DA-AL door closer offers several adjustment valves to control the door's closing speed and latching action.
3.1. Speed Adjustment Valves
The closer typically has two or three adjustment valves, usually located on the side of the closer body. These valves control different phases of the door's closing cycle:
- Closing Speed (Sweep Speed): Controls the speed of the door from its fully open position (e.g., 90° or 180°) down to approximately 15° from the closed position. Turn the valve clockwise to decrease speed (slower), and counter-clockwise to increase speed (faster).
- Latching Speed: Controls the speed of the door for the final 10-15° of closing, ensuring the door latches securely. Adjust similarly to the closing speed valve.
- Acció retardada: This specific model features delayed action, which holds the door open for an extended period before the closing cycle begins. This is useful for allowing passage of equipment or multiple people. The duration of the delay can often be adjusted via a dedicated valve.
Precaució: Do not turn adjustment valves more than two full turns counter-clockwise from their factory-set position, as this may cause fluid leakage and damage the closer. Make small adjustments (quarter turns) and test the door's action after each adjustment.
3.2. Spring Power Adjustment
The spring power of the TDC 85-DA-AL is adjustable from size 1 to 6. This adjustment controls the force required to open the door and the closing force. A higher spring size means more closing force.
- To increase spring power, turn the spring adjustment nut (usually located at the end of the closer body) clockwise.
- To decrease spring power, turn the spring adjustment nut counter-clockwise.
Nota: Ensure the door meets ADA compliance requirements for opening force after adjustment, if applicable.
4. Manteniment
Regular maintenance ensures the continued smooth operation and extends the lifespan of your door closer.
- Inspecció periòdica: Annually inspect the closer for any signs of fluid leakage, loose screws, or worn components. Check the arm assembly for bends or damage.
- Neteja: Wipe down the closer body and arm with a soft, damp drap per eliminar la pols i la brutícia. Eviteu productes de neteja abrasius.
- Lubricació: The internal components are factory-lubricated and sealed. No additional lubrication is typically required. If the arm pivots become stiff, a small amount of silicone spray can be applied to the pivot points, avoiding contact with the closer body.
- Re-adjustment: If the door's closing speed or latching action changes over time, re-adjust the speed valves as described in Section 3.
Important: Do not attempt to disassemble the closer body. It contains pressurized hydraulic fluid. Any internal issues require professional service or replacement.
5. Solució De Problemes
This section addresses common issues you might encounter with your door closer.
| Problema | Causa possible | Solució |
|---|---|---|
| La porta es tanca de cop | Closing speed or latching speed set too fast. | Turn the respective speed adjustment valves clockwise (slower). |
| Door closes too slowly or doesn't close fully | Closing speed or latching speed set too slow; insufficient spring power; air leakage. | Turn speed adjustment valves counter-clockwise (faster). Increase spring power. Check for fluid leaks; if leaking, replace closer. |
| Door does not latch | Latching speed too slow; insufficient spring power; arm not properly adjusted. | Increase latching speed. Increase spring power. Re-adjust arm length. |
| Fluid leakage from closer body | Damaged seals; over-adjustment of valves. | This indicates internal damage. The closer needs to be replaced. Do not attempt to repair. |
| Door difficult to open | Spring power set too high. | Decrease spring power. Ensure compliance with ADA opening force requirements. |
6. Especificacions
Detailed technical specifications for the TownSteel TDC 85-DA-AL Hydraulic Door Closer.
| Atribut | Valor |
|---|---|
| Número de model | TDC 85-DA-AL |
| Closer Performance | Heavy Duty |
| Mecanisme | Cremallera i pinyó |
| Entrega de portes | Sense mà |
| Tipus de braç | Delayed Action, Standard Arm |
| Estil de muntatge | Braç estàndard |
| Longitud de l'habitatge | 12-5 / 8 polzades. |
| Housing Width | 2-3 / 16 polzades. |
| Alçada de l'habitatge | 3 In. to 5 In. |
| Max. Door Opening | 90 Degrees to 180 Degrees |
| Exterior Door Width (Max) | 42 polzades. |
| Interior Door Width (Max) | 48 polzades. |
| Font d'alimentació | Hydraulic/Spring |
| Projection from Wall | 5 polzades. |
| Talla de primavera | Adjustable 1 to 6 |
| Color | Alumini |
| Normes | ANSI/BHMA, ADA |
| Pes de l'article | 7 lliures |
| Fabricant | TOWNSTEEL |
7. Garantia i Suport
For specific warranty information regarding your TownSteel TDC 85-DA-AL door closer, please refer to the warranty card included with your product or visit the official TownSteel website. For technical support, installation assistance, or to inquire about replacement parts, please contact TownSteel customer service directly.
Please note that warranty terms may vary based on region and purchase date. Keep your proof of purchase for warranty claims.
