BONTEC MTR-B2 2-Tier Wood Monitor Stand Riser Instruction Manual

Introducció

This manual provides instructions for the assembly, operation, and maintenance of your BONTEC MTR-B2 2-Tier Wood Monitor Stand Riser. This product is designed to elevate your monitor to an ergonomic height, reduce neck and back strain, and organize your workspace with its integrated storage and cable management features.

Característiques del producte

Materials de primera qualitat: Constructed from eco-friendly MDF wood with a smooth finish for durability and stability.
Disseny ergonòmic: Elevates your screen by 5.6 inches to eye level, promoting healthier posture and reducing strain.
Spacious 2-Tier Storage: Proporciona ample space (21.3 inches wide) for laptops, keyboards, and other desk essentials.
Gestió integrada de cables: Features a built-in system and cellphone holder to keep your workspace organized and clutter-free.
Muntatge fàcil: Designed for quick and straightforward assembly.
Disseny estable: Includes soft rubber feet to ensure stability and protect your desk surface.

Diagram illustrating ergonomic benefits of a monitor stand — **Figure 1: Ergonomic Benefits.** This diagram shows the difference in posture with and without a monitor riser, highlighting how the stand helps maintain a straight back and reduces neck strain.

Contingut del paquet

Please verify that all components are present before beginning assembly. Refer to the assembly diagram for visual identification.

Top Shelf Board (x1)
Side Support Boards (x2)
Tauler del prestatge del mig (x1)
Connecting Screws (Type A, x6)
Cam Locks (Type B, x6)
Wooden Dowels (Type C, x4)
Rubber Feet (Type D, x6)
Cable Management Clip (Type E, x1)

Assembly diagram showing all parts and steps for the monitor stand — **Figure 2: Assembly Components.** This image displays all individual parts and hardware included in the package, along with a step-by-step visual guide for assembly.

Instruccions de muntatge

Follow these steps to assemble your BONTEC MTR-B2 Monitor Stand Riser. A screwdriver is required (not included).

Step 1: Attach Connecting Screws to Top Shelf. Insert 4 connecting screws (Type A) into the pre-drilled holes on the underside of the top shelf board. Ensure they are securely fastened.
Step 2: Attach Wooden Dowels to Side Supports. Insert 2 wooden dowels (Type C) into the corresponding holes on the inner side of each side support board.
Step 3: Connect Side Supports to Middle Shelf. Align the middle shelf board with the wooden dowels on the side support boards. Secure the middle shelf to the side supports using 2 cam locks (Type B) on each side. Turn the cam locks clockwise until tight.
Step 4: Attach Top Shelf to Assembled Base. Align the top shelf (with connecting screws from Step 1) with the holes on the top edges of the assembled side and middle shelves. Secure the top shelf using the remaining 2 cam locks (Type B) on each side. Turn clockwise until tight.
Step 5: Apply Rubber Feet. Attach the 6 rubber feet (Type D) to the bottom corners and center of the stand to prevent scratching and ensure stability.
Step 6: Install Cable Management Clip. Attach the cable management clip (Type E) to the desired side of the stand for organizing cables.

Note: Do not overtighten screws to avoid damaging the wood.

Detailed step-by-step assembly instructions for the BONTEC monitor stand — **Figure 3: Visual Assembly Guide.** This diagram provides a visual representation of each assembly step, showing component placement and hardware usage.

Instruccions de funcionament

Your BONTEC MTR-B2 Monitor Stand Riser is designed for versatile use to enhance your workspace.

Col·locació del monitor: Place your monitor securely on the top surface of the stand. Ensure the monitor's base fits within the dimensions of the stand.
Keyboard Storage: Utilize the space beneath the middle shelf to store your full-size keyboard when not in use, freeing up desk space.
Emmagatzematge d'accessoris: The middle shelf and side compartments are ideal for organizing notebooks, pens, external hard drives, or other small office supplies.
Cellphone Holder: Use the integrated slot on the top surface to hold your cellphone upright. The slot is designed to allow charging cables to pass through for convenience.
Gestió de cables: Route power cords and data lines through the attached cable management clip to keep them tidy and prevent tangles.

Monitor stand in use with a monitor, phone, and speaker on top, and keyboard underneath — **Figure 4: Organized Workspace.** This image demonstrates the monitor stand in a typical setup, showcasing how it elevates the monitor and provides organized storage for various desk items.

Close-up of the monitor stand's phone holder with a phone and charging cable, and rubber feet — **Figure 5: Phone Holder and Stability.** Un detallat view of the integrated cellphone holder, showing a phone being charged, and the non-slip rubber feet at the base of the stand.

Cable management clip on the side of the monitor stand organizing power and data cables — **Figura 6: Gestió de cables.** This image highlights the cable management clip attached to the side of the stand, effectively organizing power and data cables.

Monitor stand with a full-size keyboard stored underneath — **Figure 7: Keyboard Storage.** The image shows a full-size keyboard neatly stored in the lower tier of the monitor stand, demonstrating efficient use of space.

Manteniment

To ensure the longevity and appearance of your monitor stand, follow these simple maintenance guidelines:

Neteja: Netegeu la superfície amb un suau, damp drap. Eviteu utilitzar productes químics agressius o netejadors abrasius, ja que poden danyar l'acabat.
Pols: Netegeu la pols del suport regularment per evitar acumulacions.
Comprovació d'estabilitat: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
Eviteu el pes excessiu: Do not exceed the maximum load capacity of 66 pounds (30 kg) to prevent damage or instability.
Protegir de la humitat: Keep the stand away from excessive moisture or direct sunlight to prevent warping or discoloration of the wood.

Resolució de problemes

If you encounter any issues with your BONTEC MTR-B2 Monitor Stand Riser, refer to the following common solutions:

Problema	Causa possible	Solució
El suport està inestable o trontolla.	Screws are loose; uneven surface; missing rubber feet.	Ensure all connecting screws and cam locks are tightened. Place the stand on a flat, stable surface. Verify all rubber feet are attached.
Dificultat durant el muntatge.	Orientació incorrecta de la peça; falta de maquinari.	Review the assembly instructions and diagrams carefully. Ensure parts are oriented correctly. Check package contents against the list. Do not force parts together.
Monitor does not fit on the stand.	Monitor base is too large for the stand's top surface.	Verify your monitor's base dimensions against the stand's top surface dimensions (21.26 x 10.04 inches).

Especificacions

Atribut	Detall
Número de model	MTR-B2
Marca	BONTEC
Material	Fusta d'enginyeria (MDF)
Color	Negre
Dimensions del producte (L x A x A)	21.26 x 10.04 x 5.59 polzades (540 x 255 x 142 mm)
Pes de l'article	7 lliures (3.17 kg)
Capacitat de càrrega	66 lliures (30 kg)
Muntatge obligatori	Sí
Característica especial	Lightweight, 2-Tier Storage, Cable Management, Cellphone Holder

Diagram showing the dimensions of the BONTEC monitor stand in millimeters — **Figura 8: Dimensions del producte.** This image provides a detailed diagram of the monitor stand's dimensions, including width, depth, and height, in millimeters.

Vídeos de productes

BONTEC 2-Tier Wood Monitor Stand Riser Overview

Video 1: Product Features and Installation Steps. Aquest vídeo ofereix una descripció completaview of the BONTEC 2-Tier Wood Monitor Stand Riser, highlighting its key features, dimensions, and a visual guide for assembly. It demonstrates how the stand helps organize your desktop and supports a full-size keyboard.

BONTEC Extra Long 21.3 Inch 2 Tiers Wood Monitor Stand

Video 2: Detailed Product View. This video offers a closer look at the extra-long 21.3-inch BONTEC monitor stand, emphasizing its two-tier design and how it accommodates various desk setups for improved organization and ergonomics.

Garantia i assistència al client

BONTEC is committed to providing high-quality products and exceptional customer service. If you encounter any issues with your monitor stand, please do not hesitate to contact our dedicated support team.

Our customer support is available to address any concerns you may have and ensure your experience is satisfactory. Please refer to your purchase documentation or the BONTEC weblloc web per obtenir detalls específics de la garantia i informació de contacte.

	Guia d'instal·lació del suport elevador per a monitors duals BONTEC MTR-S3 Guia d'instal·lació oficial per al suport elevador per a monitor dual BONTEC MTR-S3. Apreneu a muntar el vostre organitzador d'escriptori ergonòmic de fusta amb suport per a telèfons intel·ligents.
	Instruccions de muntatge del suport elevador per a monitors duals Bontec MTR-S3 Guia pas a pas per muntar els suports elevadors per a monitors duals Bontec MTR-S3, MTR-S3-WH i MTR-S3-ZM. Inclou una llista de peces i instruccions de muntatge.
	BONTEC Black ClampManual d'instruccions de la safata del teclat Manual d'instruccions per al BONTEC Black Clamp-a la safata del teclat (model KMT01-HD), on es detalla el contingut del paquet, els passos de muntatge, les especificacions, les dimensions i els tipus d'escriptori incompatibles per a una instal·lació i un ús correctes.
	Instruccions d'instal·lació del suport per a monitor de ressort de gas BONTEC GDM7501 Guia d'instal·lació detallada del suport de monitor amb ressort de gas BONTEC GDM7501, que cobreix clamp i configuració de la base amb ulleres, fixació de la placa VESA, instal·lació del braç, ajustos i gestió de cables.
	Guia d'instal·lació del suport de carro per a TV BONTEC FN-411 Instruccions d'instal·lació detallades per al suport de TV mòbil BONTEC FN-411, que inclouen la llista de verificació de components i les instruccions de muntatge pas a pas per a televisors de 32 a 85 polzades.
	Instruccions de muntatge de l'estació de treball mòbil BONTEC MWS-001BK Instruccions de muntatge detallades per a l'estació de treball mòbil BONTEC MWS-001BK, un suport regulable en alçada adequat per a podi, faristol i ús amb ordinador portàtil.

BONTEC MTR-B2