Introducció
This instruction manual provides detailed guidance for the setup, operation, and maintenance of your Amplicomms BKR-33 Universal Remote Control. Designed for ease of use, particularly for seniors or individuals with limited motor skills, this remote features large, illuminated buttons and a convenient learning function. Please read this manual thoroughly to ensure proper use and to maximize the functionality of your device.
Producte acabatview
El Amplicomms BKR-33 is a universal remote control capable of operating up to four different devices, including TVs, stereo systems, SAT receivers, and radios. Its key features include:
- Large, Illuminated Buttons: For enhanced visibility and ease of pressing.
- Funció d'aprenentatge: Allows copying functions directly from your original remote controls.
- Retenció de memòria: Settings are retained even after battery replacement.
- Disseny ergonòmic: Còmode de subjectar i operar.
Figura 1: Amplicomms BKR-33 Universal Remote Control. This image shows the white remote control with large, clearly labeled buttons for power, numbers, volume, and channel control. The Amplicomms logo is visible at the bottom.
Configuració
1. Instal·lació de la bateria
- Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
- Obriu la tapa del compartiment de la bateria.
- Introduïu dues piles AAA (no incloses), assegurant-vos de la polaritat correcta (+/-).
- Tanqueu bé la tapa del compartiment de la bateria.
2. Learning Function (Copying from Original Remote)
The BKR-33 remote learns functions directly from your existing remote controls. This process needs to be done for each button you wish to program.
- Col·loca el Amplicomms BKR-33 and your original remote control on a flat surface, facing each other, with their infrared emitters aligned at a distance of approximately 2-5 cm.
- Press and hold the desired device button (e.g., TV, SAT) on the BKR-33 for approximately 3 seconds until the indicator light flashes slowly.
- Press the button on the BKR-33 that you wish to program (e.g., Power button). The indicator light will now flash rapidly.
- Press and hold the corresponding button on your original remote control (e.g., Power button) until the indicator light on the BKR-33 flashes three times and then stays on. This indicates successful learning.
- Repeat steps 3 and 4 for all other buttons you wish to program for that device.
- To exit learning mode, press the device button again or wait for 10 seconds.
Nota: If the indicator light does not flash as described, ensure batteries are fresh and the remotes are properly aligned. Some original remotes may have weaker IR signals, requiring closer proximity or a longer press.
Instruccions de funcionament
Once programmed, operating the Amplicomms BKR-33 is straightforward:
- Selecció del dispositiu: Press the corresponding device button (e.g., TV, SAT) to select the device you wish to control. The indicator light will illuminate to confirm selection.
- Botó d'encendre (⏻): Encén o apaga el dispositiu seleccionat.
- Number Buttons (0-9, *, #): For direct channel input or other numerical functions.
- Volume Buttons (Volume +, Volume -): Ajusta el volum del dispositiu seleccionat.
- Channel Buttons (Channels ∧, Channels ∨): Canvia de canal amunt o avall.
- Illumination Button (💡): Activates the backlight for the buttons, improving visibility in low-light conditions.
- Favorite Buttons (♥1, ♥2): These buttons can be programmed for frequently used functions or favorite channels.
Manteniment
- Neteja: Netegeu el comandament a distància amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Substitució de la bateria: When the remote's performance degrades, replace the AAA batteries. The remote retains its programming even after battery replacement, so no re-programming is necessary.
- Emmagatzematge: Guardeu el comandament a distància en un lloc sec, allunyat de la llum solar directa i de temperatures extremes.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El comandament a distància no respon. | Piles gastades o incorrectament inserides. | Canvieu les piles per piles AAA noves, assegurant-vos de la polaritat correcta. |
| Learning function fails or is inconsistent. | Remotes not aligned, too far apart, or original remote has a weak IR signal. | Ensure remotes are 2-5 cm apart and IR emitters are aligned. Try holding the original remote button longer. Ensure the BKR-33 is in learning mode. |
| Buttons control the wrong device. | Dispositiu incorrecte seleccionat. | Press the correct device button (TV, SAT, etc.) before operating. |
| Some functions are not working after programming. | Button not successfully learned or learned incorrectly. | Repeat the learning process for the specific non-working button. |
Especificacions
| Marca | Amplicomms |
| Número de model | 906436 |
| Nom del model | Universelle Fernbedienung mit Großtasten (Universal Remote Control with Large Buttons) |
| Fabricant | Audioline GmbH |
| Dispositius compatibles | TV, stereo system, SAT receiver, radio |
| Dispositius màxims compatibles | 4 |
| Característiques especials | Universal, Illuminated buttons, Learning function |
| Tecnologia de connectivitat | infrarojos |
| Tipus de controlador | Control de botons |
| Tipus de bateria | AAA (calen 2, no incloses) |
| Dimensions del producte | 5 x 2.1 x 18.5 cm |
| Pes de l'article | 122 g |
| ASIN | B01M6CLPML |
| GTIN | 04250711906436 |
Garantia i Suport
El Amplicomms BKR-33 Universal Remote Control comes with a garantia de dos anys des de la data de compra. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.
For further assistance or technical support, please refer to the contact information provided with your product packaging or visit the official Amplicomms weblloc.
