1. Introducció
The BMC Resmart Manual CPAP machine is an intelligent Continuous Positive Airway Pressure (CPAP) device designed for home use to manage Obstructive Sleep Apnea (OSA). This manual provides comprehensive instructions for the safe and effective setup, operation, maintenance, and troubleshooting of your Resmart CPAP system. Please read this manual thoroughly before using the device.
2. Contingut del paquet
En obrir el paquet, comproveu que tots els elements següents estiguin inclosos i que estiguin en bon estat:
- BMC Resmart Manual CPAP Unit
- Màscara nasal
- Tubs d'aire
- Bossa de transport
- Air Filters (2 units)
- Manual d'usuari (aquest document)
- Cable d'alimentació
- Targeta de garantia
- Targeta SD (2 GB)
3. Informació de seguretat
Please observe the following safety precautions to ensure safe operation and prevent damage to the device or injury to the user:
- Always use the device as prescribed by your healthcare professional.
- No submergiu el dispositiu en aigua o cap altre líquid.
- Keep the device away from direct sunlight, heat sources, and flammable materials.
- Ensure the power supply meets the specified requirements (100 – 240V AC, 50/60Hz).
- Do not block the air inlet or outlet of the device.
- Inspeccioneu regularment el cable d'alimentació i l'endoll per detectar qualsevol dany.
- In case of accidental power off, the device is designed to alert the user.
- Consult a healthcare professional if you experience any discomfort or unusual symptoms during use.
4. Guia de configuració
Follow these steps to set up your BMC Resmart Manual CPAP machine:
- Col·loca el dispositiu: Position the CPAP unit on a stable, flat surface near your bed, ensuring adequate space around it for ventilation.
- Insert Air Filter: Ensure the air filter is properly inserted into its designated slot on the device. (Refer to the image of air filters in Section 2).
- Connect Air Tubing: Attach one end of the air tubing securely to the air outlet port on the CPAP unit.
- Connect Nasal Mask: Connect the other end of the air tubing to your nasal mask. Ensure a snug fit to prevent air leaks.
- Connectar l'alimentació: Plug the power cable into the CPAP unit's power inlet, then plug the other end into a suitable electrical outlet.
- Inseriu la targeta SD: Insert the 2GB SD card into the designated slot on the device. This card stores your therapy data.
5. Instruccions de funcionament
Operating your Resmart CPAP machine is straightforward:
- Començar la teràpia: Once the device is set up and you have donned your nasal mask, press the power button to begin therapy. The device will start delivering constant positive airway pressure.
- Ajusteu la configuració (si escau): Your CPAP machine operates with fixed settings based on your sleep study prescription. No manual adjustment of pressure is typically required by the user.
- Monitor Alerts: The device provides real-time audible alerts for tubing or mask leaks, ensuring effective therapy. It also alerts you in case of accidental power off.
- Review Informació sobre el tractament: Press the designated button (refer to device interface) to review your treatment information from the last day. This data is also stored on the SD card for more detailed analysis via sleep therapy software.
- End Therapy: To stop therapy, press the power button again.
The BMC Resmart CPAP machine is designed for quiet operation, minimizing disturbance during sleep.
6. Manteniment
Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your CPAP system:
6.1. Neteja diària
- Màscara nasal: Disassemble the mask components (cushion, frame, headgear). Wash the cushion and frame daily with mild soap and warm water. Rinse thoroughly and allow to air dry away from direct sunlight.
- Air Tubing: Wash the air tubing daily with mild soap and warm water. Rinse thoroughly and hang to air dry.
6.2. Neteja setmanal
- Barrets: Hand wash the headgear weekly with mild soap and warm water. Rinse well and air dry.
6.3. Substitució del filtre
- Inspect the air filters regularly (e.g., weekly). Replace the filters if they appear dirty or discolored. It is recommended to replace filters at least every 3-6 months, or more frequently in dusty environments. (Refer to the image of air filters in Section 2).
6.4. Device Exterior
- Wipe the exterior of the CPAP unit with a damp cloth as needed. Do not use abrasive cleaners or immerse the device.
7. Solució De Problemes
If you encounter issues with your BMC Resmart Manual CPAP machine, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| No air flow or low pressure |
|
|
| Audible alert sounding |
|
|
| El dispositiu no s'encén |
|
|
If the problem persists after attempting these solutions, please contact BMC customer support or your healthcare provider.
8. Especificacions
| Marca | BMC |
| Número de model | RMCPAPNM |
| Pes | 1.6 kg |
| Consum d'energia CA | 100 – 240V AC, 50/60Hz, 1.0A max |
| Capacitat de la targeta SD | 2G bytes |
| Característiques | Alert when accidental power off, Quiet operation, One button to review treatment information, Real time audible alert for tubing/mask leak. |
9. Garantia i Suport
The BMC Resmart Manual CPAP machine comes with a 3 any de garantia. Please retain your purchase receipt and warranty card for future reference.
For technical support, warranty claims, or any other inquiries, please contact your authorized BMC dealer or the manufacturer's customer service. Do not attempt to repair the device yourself, as this may void the warranty and pose safety risks.
For further information, you may refer to the official BMC weblloc web o contacteu amb els seus canals d'assistència.
