1. Introducció
Thank you for choosing the Clearaudio Smart Phono v2. This high-performance phono preamplifier is designed to accurately amplify the delicate signal from your turntable's cartridge, preparing it for your main audio system. The Smart Phono v2 supports both Moving Magnet (MM) and Moving Coil (MC) cartridges and features adjustable gain and extensive loading options for optimal sound reproduction.
Figura 1: Frontal view of the Clearaudio Smart Phono v2, showcasing its sleek, silver CNC-machined aluminum chassis with the gain attenuator and power button on top.
2. Característiques clau
- Versatile Cartridge Compatibility: Supports both Moving Coil (MC) and Moving Magnet (MM) cartridges.
- Adjustable Gain: Features a conveniently located gain attenuator on the top panel for precise level-matching with other line inputs in your audio system.
- Extensive Loading Options: Dip switches on the underside allow for fine-tuning of impedance and capacitance, ensuring compatibility with a wide range of phono cartridges.
- Integrated Subsonic Filter: A selectable subsonic filter helps to remove unwanted low-frequency rumble from warped records without affecting audible bass.
- Construcció d'alta qualitat: Newly designed, CNC-machined, resonance-free aluminum chassis for superior audio performance and durability.
- Gold-Plated Terminals: High-quality, gold-plated RCA input and output terminals ensure excellent signal transfer and corrosion resistance.
3. Configuració i connexions
Before connecting the Smart Phono v2, ensure all audio components are powered off. Refer to the diagram below for connection points and the image of the underside for dip switch settings.
3.1. Connexions físiques
- Font d'alimentació: Connect the supplied external power supply to the DC input on the rear of the Smart Phono v2 and then to a suitable AC outlet.
- Turntable Input: Connect the RCA cables from your turntable to the "INPUT" RCA jacks on the Smart Phono v2. Ensure proper left and right channel connection.
- Cable de terra: Connect the ground wire from your turntable to the ground terminal on the Smart Phono v2 to minimize hum.
- Sortida a Ampmés viu: Connect the "OUTPUT" RCA jacks of the Smart Phono v2 to a line-level input (e.g., "AUX", "CD", "Tuner") on your integrated amplifier o preamplifier. Do NOT connect to another phono input.
3.2. Cartridge Type and Loading Settings
The Smart Phono v2 features dip switches on its underside to configure settings for your specific phono cartridge. It is crucial to set these correctly for optimal performance and sound quality. Refer to your cartridge's specifications for recommended loading.
Figure 2: Underside of the Clearaudio Smart Phono v2, detailing the dip switch configurations for cartridge type, loading, and subsonic filter.
- MM/MC Selection: Locate the "MM" and "MC" dip switches. Set the switches according to your cartridge type. For Moving Magnet (MM) cartridges, ensure the MM switches are engaged. For Moving Coil (MC) cartridges, ensure the MC switches are engaged.
- MC Load (Impedance): For Moving Coil (MC) cartridges, you can adjust the input impedance using the "MC load" dip switches. Common settings include 50R, 100R, 500R, 1kΩ, and 5kΩ. Consult your MC cartridge's manual for the recommended load impedance.
- Capacitance (MM): For Moving Magnet (MM) cartridges, you can adjust the input capacitance using the dedicated dip switches. Options typically include 150pF, 250pF, and 400pF. Match this to your MM cartridge's recommended capacitance.
- Filtre subsònic: The "subsonic filter OFF>ON" switch activates or deactivates the subsonic filter. Engaging this filter can help reduce low-frequency rumble caused by warped records or turntable motor noise, which can otherwise consume amplifier power and cause woofer pumping. It is generally recommended to keep this ON unless you experience a loss of desired deep bass.
Note: Always power off the unit before changing dip switch settings to prevent potential damage or unexpected behavior.
4. Instruccions de funcionament
- Encès: After all connections are made and dip switches are set, press the power on/off button located on the top panel of the Smart Phono v2. The unit will illuminate to indicate it is powered on.
- Ajust de guany: The gain attenuator knob on the top panel allows you to fine-tune the output level of the Smart Phono v2. Adjust this knob so that the volume level from your turntable matches the level of other sources (e.g., CD player) connected to your amplifier. Start with a lower setting and gradually increase.
- Reproducció: Seleccioneu l'entrada adequada al vostre amplifier, lower the tonearm onto a record, and enjoy your music.
- Apagar: When finished listening, press the power on/off button to turn off the unit.
5. Manteniment
The Clearaudio Smart Phono v2 requires minimal maintenance. Follow these guidelines to ensure its longevity:
- Neteja: Use a soft, dry, lint-free cloth to wipe the chassis. Do not use liquid cleaners, aerosols, or abrasive chemicals, as these may damage the finish or internal components.
- Col·locació: Place the unit on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the unit.
- Manipulació: Manipuleu la unitat amb cura. Eviteu deixar-la caure ni sotmetre-la a impactes forts.
6. Solució De Problemes
If you encounter issues with your Smart Phono v2, please consult the following common troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| Cap so o un so molt baix. |
|
|
| Soroll de brunzit o brunzit. |
|
|
| So distorsionat. |
|
|
If the problem persists after trying these steps, please contact Clearaudio customer support or your authorized dealer.
7. Especificacions
| Característica | Detall |
|---|---|
| Modes | Switchable Moving Coil (MC) / Moving Magnet (MM) |
| Amplification at 1 kHz | 54-68 dB (Moving Coil), 34-48 dB (Moving Magnet) |
| RIAA Equalization | Yes (75 µs/318 µs /3180 µs) |
| Precisió RIAA | ± 0.3 dB / 10Hz – 100kHz |
| Ràtio senyal / soroll | 72 dB / Moving Coil ("A" weighted), 85 dB Moving Magnet ("A" weighted) |
| Volum de sortida màximtage | 10 V eff. at 1 kHz |
| Distorsió harmònica total (THD) | <0.004% MC ("A" @ 1 kHz/-1 dB @ MAX) |
| Altura al cap | 18 dB / Moving Coil (Gain Control on MAX) |
| Separació de canals | > 90 dB a 1 kHz |
| Consum d'energia en mode d'espera | <0.3 watt |
| Font d'alimentació | ± 18 V DC / 300 mA (external power supply) |
| Sortides | RCA desequilibrat |
| Pes | 1.1 lliures (aprox. 0.5 kg) |
| Dimensions (L x A x A) | 4.02″ x 3.54″ x 1.42″ (approx. 10.2 cm x 9 cm x 3.6 cm) |
| Número de model de l'article | SMART PHONO V2 |
| Fabricant | Clearaudio |
8. Garantia i Suport
The Clearaudio Smart Phono v2 comes with a 3 any de garantia from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance. Please retain your proof of purchase for warranty claims.
For technical support, service, or warranty inquiries, please contact your authorized Clearaudio dealer or visit the official Clearaudio weblloc per obtenir informació de contacte.
Clearaudio is committed to providing high-quality audio products and excellent customer service.
