Manual d'usuari del convector Uniwatt by Stelpro UHC2002W

1. Producte acabatview

The Uniwatt by Stelpro UHC2002W is a modern, surface-mounted convector heater designed to provide consistent and quiet warmth. This 2000W, 240V unit features a built-in electronic thermostat for precise temperature control and energy efficiency. Its sleek design and durable finish make it suitable for various indoor spaces.

Imatge 1.1: Frontal view of the Uniwatt by Stelpro UHC2002W Convector Heater.

Característiques principals:

• Capacitat de calefacció: 2000 Watts, 240 Volts.
• Termostat: Integrated electronic thermostat for optimal energy usage.
• Disseny: Sleek, modern aesthetic with rounded sides and a 22-gauge steel cabinet.
• Instal·lació: Designed for surface or wall-mounted installation with a concealed mounting bracket.
• Funcionament: Quiet operation suitable for bedrooms, offices, and living areas.

2. Informació de seguretat

Read all instructions before installing or using this heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or death.

Pautes generals de seguretat:

• Protecció de circuits: Protect the unit with appropriate circuit breakers or fuses as per the nameplate specifications.
• Voltage Compatibilitat: Assegureu-vos el subministrament voltage (volts) matches the rating indicated on the unit's nameplate.
• Posada a terra: Aquesta unitat ha d'estar correctament connectada a terra.
• Cablejat: Use copper conductors only. Power leads must be suitable for 75°C (167°F).
• Desconnexió d'alimentació: Always switch off the power supply to the unit at the circuit breaker/fuse before any installation, repair, or cleaning procedures.
• Ús previst: Verify that the unit is designed for the intended application. Consult the product catalog or a representative if necessary.
• Heating Capacity Recommendation: Recommended heating capacity is 1.25 W/cubic foot (0.03 m³).

3. Instal·lació

The UHC2002W convector heater is designed for streamlined surface or wall-mounted installation. Follow these steps for a secure and efficient setup.

Muntatge de l'escalfador:

1. Selecció d'ubicació: Choose a suitable wall location, ensuring a minimum clearance of 4 inches (10 cm) from the floor to the bottom of the heater. Avoid placing it directly under electrical outlets.
2. Instal·lació del suport: Utilize the concealed mounting bracket provided. Securely attach the bracket to the wall studs or use appropriate wall anchors for stability.
3. Col·locació de l'escalfador: Carefully hang the heater onto the installed mounting bracket. Ensure it is level and securely seated.

Image 3.1: The convector heater installed on a wall, demonstrating its quick and easy installation process.

Electrical Connection (Hardwired 240V):

This heater requires a hardwired 240V connection. All electrical work must be performed by a qualified electrician in accordance with local and national electrical codes.

1. Desconnexió d'alimentació: Before starting any wiring, ensure the main power supply to the circuit is turned off at the breaker panel.
2. Compartiment de cablejat d'accés: Open the wiring compartment on the back of the heater.
3. Connecteu els cables: Connect the 240V power supply wires to the heater's terminals using appropriate wire connectors. The back entry plate includes cable clamps for a tidy and secure setup. Ensure all connections are tight and correct (Line 1, Line 2, Ground).
4. Compartiment tancat: Tanqueu bé la tapa del compartiment de cablejat.
5. Restaura l'alimentació: Un cop finalitzada i verificada la instal·lació, restableu l'alimentació a l'interruptor.

Image 3.2: Illustration of a 240V hardwired connection for the heater, showing proper wiring into a junction box.

4. Instruccions de funcionament

The UHC2002W heater features a built-in electronic thermostat for precise temperature control.

Ús del termòstat electrònic:

1. Encès: Ensure the heater is properly installed and connected to power.
2. Ajust de temperatura: Use the up and down buttons on the thermostat display to set your desired room temperature. The current temperature and setpoint will be visible on the digital display.
3. Eficiència energètica: The electronic thermostat is designed to optimize energy usage by maintaining the set temperature efficiently.
4. Funcionament silenciós: The convector design ensures quiet operation, making it suitable for noise-sensitive environments.

Image 4.1: Close-up of the heater's electronic thermostat, displaying the current temperature setting.

5. Manteniment

Regular maintenance ensures the longevity and efficient operation of your convector heater. Always disconnect power before performing any maintenance.

Neteja:

• Neteja exterior: Netegeu les superfícies exteriors amb un damp cloth. Do not use abrasive cleaners, solvents, or spray directly onto the unit.
• Eliminació de pols: Periodically use a vacuum cleaner with a brush attachment to remove dust from the air intake and exhaust grilles. This helps maintain optimal airflow and heating efficiency.

Inspecció:

• Cablejat: Annually inspect the electrical connections for any signs of wear or damage. If any issues are found, contact a qualified electrician.
• Muntatge: Ensure the heater remains securely mounted to the wall.

6. Solució De Problemes

If you experience issues with your Uniwatt by Stelpro convector heater, refer to the following common troubleshooting steps.

Problemes comuns i solucions:

• L'escalfador no s'encén:
  • Check the circuit breaker: Ensure the breaker for the heater circuit is in the 'ON' position.
  • Verify power supply: Confirm that the unit is receiving 240V power.
  • Thermostat setting: Make sure the thermostat is set to a temperature higher than the current room temperature.
• Sortida de calor insuficient:
  • Clear obstructions: Ensure air intake and exhaust grilles are not blocked by furniture, curtains, or dust.
  • Room size: Verify that the heater's wattage is appropriate for the room size. Refer to the heating capacity recommendation (1.25 W/cubic foot).
  • Thermostat calibration: If you suspect the thermostat is inaccurate, consult the full product manual or contact support.
• Sorolls inusuals:
  • Expansion/Contraction: Minor clicking or popping sounds are normal as the metal heats up and cools down.
  • Loose mounting: Ensure the heater is securely mounted to the wall.

If the problem persists after attempting these troubleshooting steps, contact Stelpro customer support.

7. Especificacions

Image 7.1: Dimensional drawing of the UHC2002W convector heater.

Heating Area Recommendation:

To determine the appropriate heating device for your space, consider the area to be heated. The table below provides a general guideline for required power (wattage) based on area (in square feet).

Image 7.2: Guide for selecting heater wattage based on room area.

8. Garantia i Suport

Informació de la garantia:

The Uniwatt by Stelpro UHC2002W Convector Heater comes with a 2 any de garantiaSi us plau, conserveu el comprovant de compra per a reclamacions de garantia.

Image 8.1: Key features including the 2-year warranty.

Atenció al client:

For technical assistance, warranty claims, or further information, please contact Stelpro customer service:

• Fabricant: Stelpro
• Telèfon: 1-844-783-5776
• Correu electrònic: info@stelpro.com
• Lloc de treball: 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 6L7, Canadà

Image 8.2: Proudly made in Canada.