Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of the ROGER R93/RX12A/U 2-channel 433.92 MHz Universal Radio Receiver. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.
Informació de seguretat
- Seguretat elèctrica: Installation must be performed by qualified personnel in accordance with local electrical codes. Disconnect power before making any connections or performing maintenance.
- Condicions ambientals: Do not expose the receiver to extreme temperatures, humidity, or direct water contact. Ensure proper ventilation if enclosed.
- Interferència: This device operates on a radio frequency. Avoid installing near sources of strong electromagnetic interference that could affect its performance.
- Ús previst: This receiver is designed for universal radio control applications. Do not use for purposes other than its intended design.
Producte acabatview
The ROGER R93/RX12A/U is a compact 2-channel radio receiver designed for integration into various control systems. It comes housed in a durable plastic casing, protecting its internal circuitry.
Figure 1: ROGER R93/RX12A/U Receiver (internal view). The image shows the receiver's circuit board removed from its plastic housing. Key components visible include two blue electrolytic capacitors, several integrated circuits, red push-buttons labeled "MODE", and a green screw terminal block for wiring connections. The model number "R93/RX12A/U" and "ROGER TECHNOLOGY" are printed on the PCB. The black plastic housing is shown separately, indicating its protective function.
Components clau:
- Plàstic Casing: Provides protection against environmental factors.
- Circuit Board (PCB): Contains the radio receiver module and control logic.
- Bloc de terminals: Green screw terminals for connecting power supply and output relays.
- MODE Buttons: Red push-buttons for programming and configuration.
- Indicadors LED: (If present, not clearly visible but common) For status and programming feedback.
Configuració
1. Muntatge:
The receiver should be mounted in a secure, dry location, away from direct sunlight and excessive vibration. Use appropriate screws or mounting hardware through the designated mounting holes in the plastic casing. Ensure adequate space for wiring connections.
2. Connexions de cablejat:
Refer to the markings on the green terminal block for correct wiring. Typical connections include:
- Font d'alimentació: Connect the appropriate DC voltage (e.g., 12V or 24V DC, check specific voltage requirements on the device or packaging) to the designated power input terminals. Observe polarity.
- Sortida del canal 1: Connect to the device or system to be controlled by channel 1. These are typically relay outputs (NO/NC/COM).
- Sortida del canal 2: Connect to the device or system to be controlled by channel 2.
- Antena: Connect the supplied antenna (if external) to the antenna terminal for optimal reception.
Warning: Ensure power is disconnected before making any wiring connections to prevent electric shock or damage to the device.
En funcionament
Programació de transmissors:
The receiver needs to be paired with compatible 433.92 MHz transmitters. The programming procedure typically involves using the "MODE" buttons on the receiver's circuit board.
- Introduïu el mode de programació: Press and hold one of the "MODE" buttons (e.g., for Channel 1) until an LED indicator (if present) changes state or a specific sound is emitted.
- Senyal de transmissió: While the receiver is in programming mode, press the desired button on your transmitter. The receiver should acknowledge the signal (e.g., LED flashes, sound).
- Sortir del mode de programació: The receiver may automatically exit programming mode after a successful pairing or after a timeout. Alternatively, press the "MODE" button again briefly.
- Repeat for Channel 2: Follow the same procedure for the second channel using its corresponding "MODE" button.
Note: Specific programming steps may vary slightly depending on the transmitter model. Refer to your transmitter's manual for detailed pairing instructions.
Manteniment
- Neteja: Keep the receiver clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or solvents.
- Inspecció: Periodically inspect wiring connections for looseness or corrosion. Ensure the casing is intact and free from damage.
- Control ambiental: Verifiqueu que l'entorn operatiu es mantingui dins dels rangs de temperatura i humitat especificats.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Receiver not responding to transmitter. |
|
|
| Rang de funcionament limitat. |
|
|
| El LED del receptor no s'il·lumina. |
|
|
Especificacions
| Característica | Detall |
|---|---|
| Número de model | R93/RX12A/U |
| Marca | ROGER |
| Freqüència | 433.92 MHz |
| Canals | 2 |
| Material | Plastic (casing) |
| Fabricant | ROGER |
| ASIN | B01MRU3AV8 |
Garantia
Specific warranty information for the ROGER R93/RX12A/U receiver is not available in the provided product details. Please refer to your point of purchase or the manufacturer's official weblloc web per conèixer els termes i condicions de la garantia.
Suport
For technical assistance, troubleshooting beyond this manual, or inquiries regarding spare parts, please contact your authorized ROGER dealer or the manufacturer's customer support. Information regarding spare parts availability is not provided in the product details.
