Manual d'usuari de la prestatgeria de filferro ajustable de 4 nivells Nexel

1. Producte acabatview

The Nexel 18" x 24" x 74" 4-Tier Adjustable Wire Shelving Unit is a robust and versatile storage solution designed for various applications, including foodservice, healthcare, commercial, industrial, and consumer use. This unit features a durable black epoxy finish, making it suitable for both wet and dry environments, and is NSF approved for quality and safety.

Les característiques clau inclouen:

• Four adjustable wire shelves.
• Reinforced shelves with welded surface ribs for enhanced strength.
• Open design to maximize air and light circulation, minimizing dust accumulation.
• Easy, tool-free shelf adjustment in 1-inch increments.
• Four adjustable leveling feet for stability on uneven floors.
• Black epoxy finish for rust and corrosion resistance.

Figure 1.1: Fully assembled Nexel 4-Tier Adjustable Wire Shelving Unit, showcasing its black epoxy finish and wire shelf design.

2. Instruccions de configuració

This section provides step-by-step instructions for assembling your Nexel 4-Tier Adjustable Wire Shelving Unit. Assembly is required and can be completed without specialized tools.

2.1. Desembalatge i identificació dels components

Carefully unpack all components from the packaging. Verify that all parts are present:

• Four (4) Vertical Posts
• Four (4) Wire Shelves
• Sixteen (16) Plastic Snap-on Sleeves (four per shelf)
• Four (4) Leveling Feet

2.2. Passos de muntatge

1. Fixeu els peus de nivellació: Screw the four leveling feet into the bottom of each vertical post. Ensure they are securely tightened.
2. Mark Shelf Positions: Determine the desired height for your first (bottom) shelf. Each post has grooves at 1-inch increments. Mark the desired height on all four posts.
3. Attach Snap-on Sleeves: Take two plastic snap-on sleeves and snap them together around each post at the marked height. Ensure the arrow on each sleeve points upwards and that they are securely locked around the post. Repeat this for all four posts for the first shelf.
4. Instal·leu el primer prestatge: Carefully slide the first wire shelf down over the posts, ensuring the shelf collars fit securely over the snap-on sleeves. Apply even pressure to all four corners until the shelf rests firmly on the sleeves.


Figure 2.1: Illustration of how plastic snap-on sleeves secure the shelf to the vertical post, allowing for easy adjustment.

5. Instal·leu els prestatges restants: Repeat steps 3 and 4 for the remaining three shelves, positioning them at your desired heights.
6. Anivellar la unitat: Once all shelves are installed, place the unit in its desired location. Adjust the leveling feet by rotating them clockwise or counter-clockwise until the unit is stable and level on the floor. This compensates for uneven surfaces.

3. Instruccions de funcionament

The Nexel Wire Shelving Unit is designed for versatile storage. Follow these guidelines for optimal use and safety.

3.1. Adjusting Shelf Heights

Shelves can be easily adjusted without tools. To reposition a shelf:

1. Remove any items from the shelf you wish to adjust.
2. Lift the shelf slightly to relieve pressure on the plastic snap-on sleeves.
3. Unsnap the two plastic sleeves from each post supporting that shelf.
4. Reposition the sleeves to the new desired height, ensuring they are snapped securely around the posts and aligned at the same increment on all four posts.
5. Lower the shelf back onto the sleeves, ensuring it is firmly seated.

3.2. Loading the Shelves

Each shelf is reinforced with welded surface ribs and has a capacity of up to 800 lbs (evenly distributed). To ensure stability and longevity:

• Distribute weight evenly across the shelf surface.
• Place heavier items on lower shelves to maintain a lower center of gravity for the unit.
• No supereu la capacitat màxima de pes per prestatge.
• The open wire design promotes air circulation and minimizes dust accumulation, making it ideal for various storage needs.

Figure 3.1: The shelving unit effectively storing various items, demonstrating its versatility for different applications.

4. Manteniment

Proper care and maintenance will ensure the longevity and performance of your Nexel Wire Shelving Unit.

4.1. Neteja

To clean the unit, simply wipe surfaces with a dry cloth. For more stubborn dirt, a damp cloth with mild soap can be used, followed by thorough drying to prevent water spots.

4.2. Environmental Suitability

The black epoxy finish provides excellent resistance against rust and corrosion, making the unit suitable for a variety of environments:

• Emmagatzematge en sec
• Wet Storage
• Cooler Storage
• Emmagatzematge de congeladors

The unit is NSF approved for wet or dry use, ensuring it meets public health and safety standards.

Figure 4.1: Certification and durability features of the Black Epoxy Wire Shelving, highlighting its NSF approval and suitability for various storage conditions.

5. Solució De Problemes

This section addresses common issues you might encounter with your shelving unit.

5.1. Unit is Unstable or Wobbles

• Comproveu els peus anivelladors: Ensure all four leveling feet are making firm contact with the floor. Adjust them by rotating clockwise or counter-clockwise until the unit is stable.
• Verify Shelf Seating: Confirm that all shelves are securely seated on their plastic snap-on sleeves and that the sleeves are properly locked around the posts.
• Distribució uniforme del pes: Ensure that items on the shelves are evenly distributed and that heavier items are placed on lower shelves.

5.2. Shelf Does Not Sit Level

• Sleeve Alignment: Ensure that the plastic snap-on sleeves for the affected shelf are aligned at the exact same height (same groove increment) on all four posts.
• Sleeve Orientation: Verify that the arrows on the snap-on sleeves are pointing upwards.

5.3. Difficulty Adjusting Shelves

• Remove Load: Always remove all items from a shelf before attempting to adjust its height.
• Tècnica adequada: Ensure you are lifting the shelf slightly to relieve pressure before attempting to unsnap the sleeves.

6. Especificacions

Figure 6.1: Detailed dimensions of the Nexel 4-Tier Adjustable Wire Shelving Unit.

7. Informació de la garantia

The Nexel 4-Tier Adjustable Wire Shelving Unit comes with a limited seven-year warranty against rust and corrosion. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.

For specific terms and conditions of the warranty, please refer to the official Nexel warranty documentation or contact customer support.

8. Atenció al client

If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact Nexel customer support.

• Fabricant: Nexel
• Weblloc: www.nexel.com (Nota: Això és un marcador de posició URL as no specific support link was provided in the data. Please refer to your product packaging or official Nexel website for accurate contact information.)
• Telèfon: Refer to manufacturer's weblloc o embalatge del producte.

When contacting support, please have your product model number (18247B) and purchase information readily available.